Panasonic Kx Tgl460 Operating Instructions Manual
Have a look at the manual Panasonic Kx Tgl460 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Editing entries 1Find the desired entry (page 30). 2 MMENU N a M b N: “Edit ” a M SELECT N 3 Edit the name if necessary. a M OK N 4 Edit the phone number if necessary. a M OK N 5 Mb N: Select the desired group (page 30). a M SELECT N 2 times a M OFF N Erasing entries Erasing an entry 1 Find the desired entry (page 30). 2 MMENU N a M b N: “Erase ” a M SELECT N 3 Mb N: “Yes ” a M SELECT N a M OFF N Erasing all entries 1 MF N W a M MENU N 2 Mb N: “Erase all ” a M SELECT N 3 Mb N: Select the desired group. a M SELECT N 4 Mb N: “Yes ” a M SELECT N 5 Mb N: “Yes ” a M SELECT N a M OFF N Chain dial This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. 1 During an outside call, press MF N W . 2 Mb N: Select the desired entry. 3 Press MCALL N to dial the number. Note: R When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MD N (Pause) to add pauses after the number and PIN as necessary (page 20). R If you have rotary/pulse service, you need to press * (TONE) before pressing MF N W in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding * (TONE) to the beginning of phone numbers you wish to chain dial (page 29). Speed dial You can assign 1 phone number to each of the dial keys ( 1 to 9) on the handset. Adding phone numbers to speed dial keys n By entering phone numbers: 1 Press and hold the desired speed dial key ( 1 to 9). a M ADD N 2 Mb N: “Manual ” a M SELECT N 3 Enter the party’s name (16 characters max.). a M OK N 4 Enter the party’s phone number (24 digits max.). a M OK N a M SELECT N a M OFF N n From the phonebook: 1 Press and hold the desired speed dial key ( 1 to 9). a M ADD N 2 Mb N: “Phonebook ” a M SELECT N 3 Mb N: Select the desired entry. a M SAVE N a M OFF N Note: R If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key. Editing an entry 1 Press and hold the desired speed dial key (1 to 9). a M MENU N 2 Mb N: “Edit ” a M SELECT N 3 Edit the name if necessary. a M OK N 4 Edit the phone number if necessary. a M OK N a M SELECT N a M OFF N For assistance, please visit http://shop.panasonic.com/support31 Phonebook TGL46x(en)_1118_ver044.pdf 312015/11/18 9:33:31
Erasing an entry 1Press and hold the desired speed dial key (1 to 9). a M MENU N 2 Mb N: “Erase ” a M SELECT N 3 Mb N: “Yes ” a M SELECT N a M OFF N Viewing an entry/Making a call nUsing a cellular line: 1 Press and hold the desired speed dial key ( 1 to 9). 2 MCELL N R The unit starts dialing immediately in the following situations. – Only 1 cellular phone is paired. – A specific line is set to make cellular calls (page 19). 3 Mb N: Select the desired cellular phone. a M SELECT N n Using a landline: 1 Press and hold the desired speed dial key ( 1 to 9). 2 To make a call, press M /Z N. 32For assistance, please visit http://shop.panasonic.com/support Phonebook TGL46x(en)_1118_ver044.pdf 322015/11/18 9:33:31
Menu list To access the features, there are 2 methods. nScrolling through the display menus 1 MMENU N 2 Press MC N or MD N to select the desired main menu. a M SELECT N 3 Press MC N or MD N to select the desired item from the next sub-menus. a M SELECT N 4 Press MC N or MD N to select the desired setting. a M SAVE N n Using the direct command code 1 MMENU N a Enter the desired code. Example: Press MMENU N#101 . 2 Select the desired setting. a M SAVE N Note: R To exit the operation, press MOFF N. R In the following table, < > indicates the default settings. R In the following table, indicates the reference page number. R Display menu order and sub-menu may vary depending on your model. Display menu tree and direct command code table Main menu: W “Phonebook ” OperationCode Viewing the phonebook entry.#28030 Main menu: “Caller list ” OperationCode Viewing the caller list.#21345 Main menu: “Answering device ” Sub-menu 1Sub-menu 2SettingsCode Play new message––#32354 Play all message––#32454 Erase all message*1––#32555 GreetingRecord greeting *1–#30253 Check greeting–#30354 Pre-recorded*1 (Reset to pre-recorded greeting)–#30454 For assistance, please visit http://shop.panasonic.com/support33 Programming TGL46x(en)_1118_ver044.pdf 332015/11/18 9:33:31
Sub-menu 1Sub-menu 2SettingsCode New message alert*1Outgoing call – On/OffOn #33855 Outgoing call –Notification to– Outgoing call –Remote codeActivate Base unit beepOn #33955 SettingsRing count *1Toll saver 2-7 rings < 4 rings >#21158 Recording time *1< 3 min > 1 min Greeting only *2#30558 Remote code*1< 111 >#30657 Screen call Off#31058 Answer on *1––#32753 Answer off *1––#32853 Main menu: “ Voicemail access ”*3 OperationCode Listening to voicemail messages.#33059 Main menu: “ Intercom ” OperationCode Paging the desired unit.#27425 34For assistance, please visit http://shop.panasonic.com/support Programming TGL46x(en)_1118_ver044.pdf 342015/11/18 9:33:31
Main menu: “Bluetooth ” Sub-menu 1Sub-menu 2SettingsCode Link to cell –1:Add new device *4 (for CELL 1) – 2:Add new device *4 (for CELL 2)Connect *1 / Disconnect *1–#6251*518 #6252*6 Ringer volume – HandsetOff –6 #6281 *522 #6282*6 Ringer volume – Base unit *1Off –6 #G 6281 *5 # G 6282 *6 Ringer tone *7< Tone 2 >*5 < Tone 4 >*6#6291 *5– #6292*6 Select unit to ring*1< All > Handset 1-6#6271 *517 #6272*6 Ring as cell (limited) *1< On (with Talking CID) > On (without Talking CID) Off#6141 *517 #6142*6 Alert settings *1 – Alert On/Off Off#6101 *550 #6102*6 Alert settings *1 – Voice alert Off#6031 *550 #6032*6 Alert settings *8 – Alert tone*5 < Tone 2 >*6#6041 *550 #6042*6 Pair–#6241*516 #6242*6 Unpair–#6111*516 #6112*6 Phonebook transfer––#61848 HeadsetAdd new device *4–#62151 Connect*1 / Disconnect *1–#62251 Pair–#62151 Unpair–#61251 For assistance, please visit http://shop.panasonic.com/support35 Programming TGL46x(en)_1118_ver044.pdf 352015/11/18 9:33:31
Sub-menu 1Sub-menu 2SettingsCode SettingsAuto connect*1Off < 1 min > 3 min 5 min 10 min#63217 Cell area code *1–#63319 Cell line only mode*1On < Off >#15718 Cell line select Cellphone 1 *4 Cellphone 2 *4#63419 Set PIN*1< 0000 >#61919 International code *1–#11748 Country code *1–#118 Trunk prefix*1–#119 Main menu: “ Set date & time ” Sub-menu 1Sub-menu 2SettingsCode Date and time*1––#10114 Memo alarmAlarm1–3< Off > Once Daily Weekly#72041 Time adjustment *1, *9–< Caller ID auto > Manual#226– Main menu: “ Speed dial ” OperationCode Viewing the speed dial entry.#26131 36For assistance, please visit http://shop.panasonic.com/support Programming TGL46x(en)_1118_ver044.pdf 362015/11/18 9:33:31
Main menu: “Settings ” Sub-menu 1Sub-menu 2SettingsCode Ring adjustmentsRinger volume (Incoming) – Handset *3Off –6 #160– Ringer volume (Incoming) – Base unit *1, *3Off –6 #G 160– Intercom ringer volume (Handset)1–6 #175– Ringer tone (Incoming) *3, *7, *10 (Handset)< Tone 1 >#161– Intercom ringer tone*7, *10 (Handset)< Tone 3 >#163– Interrupt tone *11< On > Off#20124 Silent mode – On/OffOn #23841 Silent mode –Start/End#23742 Silent mode – Select groupHome Cell 1 Cell 2 Group 4-9#24142 Set date & timeDate and time *1–#10114 Memo alarm – Alarm1–3 Once Daily Weekly#72041 Time adjustment *1, *9< Caller ID auto > Manual#226– Talking caller IDHandset< On > Off#16245 Base unit *1On < Off >#G 162 For assistance, please visit http://shop.panasonic.com/support37 Programming TGL46x(en)_1118_ver044.pdf 372015/11/18 9:33:31
Sub-menu 1Sub-menu 2SettingsCode Key detector setting*12 – 1:Add new device (for Detector1 )*13 – 2:Add new device (for Detector2 ) – 3:Add new device (for Detector3 ) – 4:Add new device (for Detector4 )Change name *1Detector1#6561– Detector2*14#6562*14 Detector3 *14#6563*14 Detector4 *14#6564*14 Registration–#6571– #6572*14 #6573*14 #6574*14 Deregistration–#6581– #6582*14 #6583*14 #6584*14 Call block *1Block a single number–#21726 Block range of numbers–27 Block unknown CID ( CID : Caller ID)Block #24027 One ring for blocked call No#17327 Speed dial––#26131 Record greeting *1––#30253 Voicemail*3Save VM access# *1 ( VM : Voicemail)–#33159 VM tone detect *1< On > Off#33259 LCD contrast (Display contrast)–Level 1–4 #145– Handset name––#10444 Display name–On < Off >#10544 Redial mode– Recent dialed#65921 Auto intercom–On < Off >#27325 Key tone– Off#165– 38For assistance, please visit http://shop.panasonic.com/support Programming TGL46x(en)_1118_ver044.pdf 382015/11/18 9:33:31
Sub-menu 1Sub-menu 2SettingsCode Caller ID edit (Caller ID number auto edit)–< On > Off#21446 Auto talk *15–On < Off >#20021 Set tel line *3Set dial mode *1< Tone > Pulse#12015 Set flash time *1, *1680 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms < 700 ms > 900 ms#12122 Set line mode *1, *17A < B>#122– Call sharing *1–< On > Off#19423 RegistrationRegister handset–#13044 Deregistration *2–#13144 Change languageDisplay< English > Español#11014 Announcement *1< English > Español#11214 Main menu: “ Customer support ” OperationCode Displaying customer support Web address.#680– Main menu: “Baby monitor ” Sub-menu 1Sub-menu 2SettingsCode On/Off–On #26842 Sensitivity level–Low High#26943 For assistance, please visit http://shop.panasonic.com/support39 Programming TGL46x(en)_1118_ver044.pdf 392015/11/18 9:33:31
Main menu: “Key detector ”*12 Sub-menu 1Sub-menu 2SettingsCode Search––#655– Battery check–– *1 If you program these settings using one of the units, you do not need to program the same item using another unit. *2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code. *3 When the cellular line only mode is turned on, these menus are not displayed (page 18). *4 After the Bluetooth device is paired, the device name is displayed. *5 For CELL 1 *6 For CELL 2 *7 The preset melodies in this product ( “Tone 3 ” - “Melody 10 ”) are used with permission of © 2004 - 2013 Copyrights Vision Inc. *8 The preset melodies in this product ( “Tone 1 ” and “Tone 2 ”) are used with permission of © 2013 Copyrights Vision Inc. *9 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select “Caller ID auto ”. To turn this feature off, select “ Manual ”. (Caller ID subscribers only) To use this feature, set the date and time first (page 14). *10 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 or 2). If you select a melody, you cannot distinguish lines by their ringers. *11 This tone lets you know when you receive an outside call while you are on another line or an intercom call. If you select “On ”, the tone sounds 2 times. *12 This setting is available when you have the key detector (KX-TGA20). Read the installation manual for more information on the key detector. *13 For models with supplied key detectors, the display shows “ 1: Detector1 ”. *14 If you register 2 or more key detectors. *15 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature. *16 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at “700 ms ” unless pressing MACCEPT N fails to pick up the waiting call. *17 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to “A ” if telephone line condition is not good. 40For assistance, please visit http://shop.panasonic.com/support Programming TGL46x(en)_1118_ver044.pdf 402015/11/18 9:33:31