Home > Panasonic > Car Audio & Video > Panasonic Lcd Monitor Dvd Receiver Cq Vd6503u Operating Instructions

Panasonic Lcd Monitor Dvd Receiver Cq Vd6503u Operating Instructions

Here you can view all the pages of manual Panasonic Lcd Monitor Dvd Receiver Cq Vd6503u Operating Instructions . The Panasonic manuals for Car Audio & Video are available online for free. You can easily download all the documents as PDF.

Page 31

30
31CQ-VD6503U
English
❏MENU Operation
Note:
¡
The display returns to the previous status if there is no operation for more than 60 seconds after changing to the
setting menu.(Example: DVD mode)
Touch  in Operation Screen.
Touch desired setting.
qw
(Example: setting screen of DISPLAY UNIT apage 32)
Determines the setting and goes back to the pre-
vious menu out of the menu.
e
Determines the setting and gets out of the menu
[SRC] 
(Exit from the menu)
[MENU]
(Shows the menu display/
Goes back to the...

Page 32

31
32CQ-VD6503U
English
ID-CODE
ID Code Setting
Prior to operating this unit, it is advisable to assign a 4-
digit ID code for security. Once the ID code has been set,
the unit cannot be operated if the main power supply is
disconnected then re-connected. It is electronically locked
so that a thief cannot use the stolen unit unless that per-
son knows the code you have set.
The ID code operation must be performed only by the
person to whom the unit belongs.
Generally, it is not necessary to enter the ID...

Page 33

32
33CQ-VD6503U
English
MEMORY CLEAR
Memory clearance
The state of all of the current memories are returned to
default settings.
Note: 
¡The ID code is not deleted by executing memory clear.
: no memory clear. 
The display returns to the previous one.
: clears the memory to default settings
appears when
is selected.
: no memory clear.
: proceed.
OK
CANCEL
YES
REALLY?
YES
NO
OTHER
Other settings
: operation sound (beep) OFF
: operation sound (beep) ON
default: 
ON
ON
OFF
(Beep setting)BEEP
: set to OFF if...

Page 34

33
34CQ-VD6503U
English
Settings (continued)
RADIOINPUT/OUTPUTDVDAUDIOSCREENUSER
DIMMER
Adjusting the brightness
: automatically adjusted according to
ambient light intensity.
default: AUTO
4321
AUTO
PICTURE
Display appearance
: decreases the contrast between black and white
: increases the contrast between black and white
[
]
(Adjust the image contrast)CONTRAST
: darkens
: lightens
[
]
(Adjust the image brightness)BRIGHT
: lightens the depth of color on the display
: deepens the depth of color on the...

Page 35

¡To set the level to flat, touch and hold  (flat)
for more than 2 seconds.
¡Expectable effects vary with the audio format to be
used, settings in the menu, and other factors.
34
35CQ-VD6503U
English
: more
: less
: more
: less
: more
: less
Setting range: off, + 1 to + 10
default: off
]
[
(Applies to the Sub-woofer)SUB-W TruBass
]
[
(Applies to the rear speakers)REAR TruBass
]
[
(Applies to the front speakers)FRONT TruBass
(TruBass Setting)TruBass
: more
: less
: more
: less
Setting range: off, + 1 to +...

Page 36

35
36CQ-VD6503U
English
Settings (continued)
SP LEVEL (Speaker level)
Adjusting the output balance of each speaker
: down,    : up
: down,    : up
: down,    : up
: down,    : up
: down,    : up
: down,    : up
Setting range: – 10 dB to + 10 dB (1 dB steps)
default: ± 0 dB for all speakers
¡If the speaker setting is  or  for a speaker, the
test signal is not output and that speaker cannot be
selected. 
¡
Turn rotary volume controller or press [+]
or [–]
(VOL)
to adjust the volume of the test signal....

Page 37

36
37CQ-VD6503U
English
: disables the test tone
: enables the test tone
default: 
¡When the test tone is set to on,  test signal (a continu-
ous tone) is output from each speaker for approximately
2 seconds. 
Adjust the output balance so that the tone appears to
have the same volume from each speaker.
Adjusting the output balance: 
Adjust the volume of all of the other speakers to the vol-
ume level of the speaker from which the test signal
appears to be the quietest.
OFF
ON
OFF
(Test tone output)TEST...

Page 38

37
38CQ-VD6503U
English
Settings (continued)
DISPLAY
Display aspect and DVD software mode
: plays a video in 4:3 screen.
: plays a video in wide screen (16:9).
default: 
WIDE
WIDE
NARROW
(Display aspect setting)DVD ASPECT
: plays wide-screen video in Pan & Scan
mode (in which the left and right edges
of the screen are cut off).
: plays wide-screen video in letterbox
mode (in which black bands appear at
the top and bottom of the screen).
default: 
Note: 
¡
Set the software setting according to the symbol...

Page 39

38
39CQ-VD6503U
English
PRO LOGIC 
5.1 channel listening in Dolby surround sound
: inactivates Pro Logic
: activates Pro Logic
default: 
Note
: 
¡This setting is enabled only in the DVD/VCD/CD player
mode.
¡selection in some audio settings may disable
audio output from the subwoofer.ON
OFF
ON
OFF
DOWN MIX
To use the down mix function, specify the type.
: simple stereo down mix
(Lo = Left only, Ro = Right only)
: surround element decodable down mix
(Lt = Left total, Rt = Right total)
Note
: 
¡This...

Page 40

39
40CQ-VD6503U
English
Settings (continued)
FM SETUP
Setting for FM stations
: adjusted automatically
: narrows the frequency bandwidth to be
received to prioritize noise reduction.
: widens the frequency bandwidth to be
received to prioritize sound quality.
default: 
: saves the preset stations in each band.
: saves the preset stations in all FM lists
regardless of band.
default: 
EACH
ALL
EACH
(Auto preset setting)AUTO PRESET
AUTO
WIDE
NARROW
AUTO
(FM IF filter switching) NOISE SUPPRESSION
AM SETUP...
Start reading Panasonic Lcd Monitor Dvd Receiver Cq Vd6503u Operating Instructions

Related Manuals for Panasonic Lcd Monitor Dvd Receiver Cq Vd6503u Operating Instructions

All Panasonic manuals