Home > Panasonic > Car Audio & Video > Panasonic Lcd Monitor Dvd Receiver Cq Vd7003u Operating Instrucitons Manual

Panasonic Lcd Monitor Dvd Receiver Cq Vd7003u Operating Instrucitons Manual

Here you can view all the pages of manual Panasonic Lcd Monitor Dvd Receiver Cq Vd7003u Operating Instrucitons Manual. The Panasonic manuals for Car Audio & Video are available online for free. You can easily download all the documents as PDF.

Page 11

10
11CQ-VD7003U
English
Pictographs
You can perform some operations of this unit in one or
more methods with the touch panel or remote control.
This book explains such operations in tabular form as fol-
lows. Refer to the following for the pictographs located in
the upper part of each table.
Symbols used in this manual
Disc Marks
The following pictographs are used for the descriptions
of disc operation. (apage 19-23)
: DVD
: VCD (Video CD)
: CD
: CD-R/RWs containing MP3 files
: CD-R/RWs containing WMA...

Page 12

11
12CQ-VD7003U
English
Name of Controls and Functions
ENTER
TILTO/CASP
MUTESRC MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
ASPECT
PWR VOL
P·MODE
CLOSE
CQ-VD7003U
TILT
TEXT
ENTER
TILTOPENASP
MUTESRCMENU
CQ-VD7003U
NAVI
CLOSE
ASPECT
PWR
VOL
P·MODE
Display Unit
Display Unit
Disc slot Remote control 
sensor
w[VOL] 
e[MUTE] 
r[SRC](PWR)  
(SOURCE/POWER)
(Display Closed) (Display Raised)
t[MENU]
Dimmer Sensor 
(
apage 34)DIMMER
!0[TILT] 
o[OPEN] (CLOSE)
i
[ENTER] o[OPEN] (CLOSE) !0[TILT] 
u [u]  q[ASP] (ASPECT)...

Page 13

12
13CQ-VD7003U
English
CAR AV
MUTE
ENT
VOL
SRC
PWR
DVD MENU
RET
RETURN
TOP MENU
ENTER / BAND
r[MUTE
]
t[+] [–](VOL) q[SRC](PWR)  
(SOURCE/POWER)
e[RET]
(RETURN)
u[]
(TOP MENU/DVD MENU)
w
[
■][
❚❚][
B]
[
s] [
d]
Aim the remote control at the remote control sensor of the display unit and operate it.
y [
}] [
{]
[
]] [
[]
[ENT
] (ENTER/BAND)
Remote Control
q
w
[
■]
[
❚❚]
[
B]
e
rt
y
u
¡Displays the DVD/title menu. (Operations
vary according to the media.) [      ] (TOP MENU/
DVD MENU)
¡Selects a band....

Page 14

13
14CQ-VD7003U
English
Touch Panel Operation Overview
The State of Operation Screen
❒Notes on the Touch Panel
Before operation
¡Clean the surface of the touch panel.  (apage 47)
Operation
¡Use only your fingers to operate the touch panel.
¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any
hard objects.¡Do not use a pen or other sharp implements to
operate the touch panel.
¡Do not bump the front panel.
aFailure to observe the above may damage or
break the glass on the...

Page 15

14
15CQ-VD7003U
English
Radio
(apage 26)
*1To switch Operation Screen ON,  touch the center of touch panel.
*2The operation screen is not available in the video mode.
DVD mode
Showing the hidden part of the screen. 
Some items have continued parts. You can see the continued parts by pressing  or  . 
Note:
¡
Refer to the description of each mode for how to operate the operation screen.
Switching the Display
Disc Player (DVD/VCD(*1)/
CD/MP3/WMA)
(apage 20)
Touching  allows users to switch between screens...

Page 16

15
16CQ-VD7003U
English
Operations
General
ENTER
TILTOPENASP
MUTESRCMENU
CQ-VD7003U
NAVI
CLOSE
ASPECT
PWR
VOL
P·MODETILTOPEN
ENTERMUTESRC
[MUTE][OPEN]
(CLOSE)
[SRC](PWR: power) [TILT] [VOL]
Remote Control Sensor
[SRC] –
–
–[SRC]
[SRC]
(apage 14)[SRC]
General Operations
DVD VTRRADIOCH-CEND
Power
ON : 
Source selection
[OPEN]
¡Press once to open. Press again to close.Display Open/Close
Note:
¡When the display unit is opened or closed, a loud beep sounds three times.
¡If the unit stops halfway,...

Page 17

16
17CQ-VD7003U
English
CAR AV
MUTE
ENT
VOLSRCPWR
DVD MENURETRETURN
TOP MENU
ENTER / BAND
MUTESRCMUTESRCVOL
[SRC] (PWR: power)
[MUTE]
[]] [[]
[+] [–]
q Press and hold for more than 2 sec-
onds.
w Press to adjust. Setup is the same as
from MENU. Refer to 
(display unit) for details. (
apage 32) 
DISPLAY UNIT
Operations
DVD VTRRADIOCH-CEND
––[]]or [[] – –
–
–
or 
q [+]
w [
–]q Up
w Down
wq
Volume
Note:
¡The sound level for
each source is
stored in memory.
[TILT]
[]]or [[]
To raise the display, press...

Page 18

17
18CQ-VD7003U
English
Before Disc Playback
Discs that can be Played Back
❒Symbols used on jackets
(Examples of such symbols include)
¡: Number of subtitle languages
¡: Number of audio tracks
¡: Number of angles
The numbers indicate the number of languages,
tracks, angles, etc., recorded on the disc.
Screen size (H:V aspect ratio)
¡: 4:3 standard size
¡: Letterbox (apage 38)
¡ 16:9 wide size
: Playback in  (letterbox)
format on a standard screen (4:3).
: Playback in (pan and
scan) (apage 38) format on a...

Page 19

18
19CQ-VD7003U
English
ENTER
TILTO/CASP
MUTESRC MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
ASPECT
PWR VOL
P·MODE
CLOSE
CQ-VD7003U
TILT
TEXT
ENTER
TILTO/CASP
MUTESRC MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
ASPECT
PWR VOL
P·MODE
CLOSE
CQ-VD7003U
TILT
TEXT
[u] (eject)
lights.
Disc Insert
¡The mode that supports the disc is selected, and play-
back starts.
When a disc is in the player, change to disc player
mode (CD, MP3, WMA, DVD or VCD (Video CD)) and
playback starts.
Note:
¡Do not insert a disc when the eject button...

Page 20

19
20CQ-VD7003U
English
Disc Player
Video Mode
❒Folder/File/Track Selection
qTouch  (folder name) to select
a folder.
,  : scrolls up/down the file list by
1 page.
,  : scrolls up/down the file list by
1 line.
wTouch  (file name) to play.
qPress []], [[], [}]or [{]to select a
folder. 
[]][[]: movement among different lev-
els of trees
[}][{]: movement in the same tree
wPress [ENTER].
DVD VTRRADIOCH-CEND
: Folder
: MP3/WMA file
Note:
¡It is not possible to display the whole tree and file list
in a...
Start reading Panasonic Lcd Monitor Dvd Receiver Cq Vd7003u Operating Instrucitons Manual

Related Manuals for Panasonic Lcd Monitor Dvd Receiver Cq Vd7003u Operating Instrucitons Manual

All Panasonic manuals