Home
>
Panasonic
>
Projector
>
Panasonic LCD Projector PT-L711 PT-L701 PT-L701SD PTL511 PT-L501 Operating Instructions
Panasonic LCD Projector PT-L711 PT-L701 PT-L701SD PTL511 PT-L501 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector PT-L711 PT-L701 PT-L701SD PTL511 PT-L501 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
Panasonic RS-232 Protocol for LCD Projector 19 19
5.6 Digital Zoom Down (DZD)
Name Digital Zoom Down Syntax [STX]DZD[ETX] Function This command enables the Digital Zoom Function. Parameters None Response [STX]DZD[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]DZD[ETX] Notes
Sending the DZD Command will start the digital zoom
mode. Cursor Commands (OCU, OCD, OCR, and
OCL) can be used to set the position. The Enter...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-20.png "Page 21
Panasonic RS-232 Protocol for LCD Projector 19 19
5.6 Digital Zoom Down (DZD)
Name Digital Zoom Down Syntax [STX]DZD[ETX] Function This command enables the Digital Zoom Function. Parameters None Response [STX]DZD[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]DZD[ETX] Notes
Sending the DZD Command will start the digital zoom
mode. Cursor Commands (OCU, OCD, OCR, and
OCL) can be used to set the position. The Enter...")
Panasonic RS-232 Protocol for LCD Projector 19 19 5.6 Digital Zoom Down (DZD) Name Digital Zoom Down Syntax [STX]DZD[ETX] Function This command enables the Digital Zoom Function. Parameters None Response [STX]DZD[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]DZD[ETX] Notes Sending the DZD Command will start the digital zoom mode. Cursor Commands (OCU, OCD, OCR, and OCL) can be used to set the position. The Enter...
Page 22
![Page 22
Panasonic RS-232 Protocol for LCD Projector 20 20
5.7 Digital Zoom Up (DZU)
Name Digital Zoom Up Syntax [STX]DZU[ETX] Function This command enables the Digital Zoom Function. Parameters None Response [STX]DZU[ETX]] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]DZU[ETX] Notes
Sending the DZD Command will start the digital zoom
mode. Cursor Commands (OCU, OCD, OCR, and
OCL) can be used to set the position. The Enter...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-21.png "Page 22
Panasonic RS-232 Protocol for LCD Projector 20 20
5.7 Digital Zoom Up (DZU)
Name Digital Zoom Up Syntax [STX]DZU[ETX] Function This command enables the Digital Zoom Function. Parameters None Response [STX]DZU[ETX]] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]DZU[ETX] Notes
Sending the DZD Command will start the digital zoom
mode. Cursor Commands (OCU, OCD, OCR, and
OCL) can be used to set the position. The Enter...")
Panasonic RS-232 Protocol for LCD Projector 20 20 5.7 Digital Zoom Up (DZU) Name Digital Zoom Up Syntax [STX]DZU[ETX] Function This command enables the Digital Zoom Function. Parameters None Response [STX]DZU[ETX]] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]DZU[ETX] Notes Sending the DZD Command will start the digital zoom mode. Cursor Commands (OCU, OCD, OCR, and OCL) can be used to set the position. The Enter...
Page 23
![Page 23
Panasonic RS-232 Protocol for LCD Projector 21 21
5.8 Input Select (IIS)
Name Input Select Syntax [STX]IIS:p1p2p3[ETX] Function This command will allow selection of the various inputs. Parameters Code Description
VID - Video
SVD - Svideo
RG1 - RGB 1
RG2 - RGB 2 Response [STX]IIS[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]IIS:RG1[ETX] will select the RGB1 Input Notes
If an unused input is selected...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-22.png "Page 23
Panasonic RS-232 Protocol for LCD Projector 21 21
5.8 Input Select (IIS)
Name Input Select Syntax [STX]IIS:p1p2p3[ETX] Function This command will allow selection of the various inputs. Parameters Code Description
VID - Video
SVD - Svideo
RG1 - RGB 1
RG2 - RGB 2 Response [STX]IIS[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]IIS:RG1[ETX] will select the RGB1 Input Notes
If an unused input is selected...")
Panasonic RS-232 Protocol for LCD Projector 21 21 5.8 Input Select (IIS) Name Input Select Syntax [STX]IIS:p1p2p3[ETX] Function This command will allow selection of the various inputs. Parameters Code Description VID - Video SVD - Svideo RG1 - RGB 1 RG2 - RGB 2 Response [STX]IIS[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]IIS:RG1[ETX] will select the RGB1 Input Notes If an unused input is selected...
Page 24
![Page 24
Panasonic RS-232 Protocol for LCD Projector 22 22 5.9 Keystone (KST)
Name Keystone Adjustment Syntax [STX]KST[ETX] Function Adjust Keystone. Parameters None Response [STX]KST[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]KST[ETX] Notes
Send this command to enable the Keystone Adjustment
and use the Cursor Left and Cursor Right commands to
make the actual adjustments. Send the Menu
Command to escape the Keystone...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-23.png "Page 24
Panasonic RS-232 Protocol for LCD Projector 22 22 5.9 Keystone (KST)
Name Keystone Adjustment Syntax [STX]KST[ETX] Function Adjust Keystone. Parameters None Response [STX]KST[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]KST[ETX] Notes
Send this command to enable the Keystone Adjustment
and use the Cursor Left and Cursor Right commands to
make the actual adjustments. Send the Menu
Command to escape the Keystone...")
Panasonic RS-232 Protocol for LCD Projector 22 22 5.9 Keystone (KST) Name Keystone Adjustment Syntax [STX]KST[ETX] Function Adjust Keystone. Parameters None Response [STX]KST[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]KST[ETX] Notes Send this command to enable the Keystone Adjustment and use the Cursor Left and Cursor Right commands to make the actual adjustments. Send the Menu Command to escape the Keystone...
Page 25
![Page 25
Panasonic RS-232 Protocol for LCD Projector 23 23 5.10 Auto Keystone (OAK)
Name Automatic Keystone Syntax [STX]OAK:p1[ETX] Function Sets the Auto Keystone Mode for the Auto Set-up
feature. Parameters Code Description
0 Auto Keystone Off
1 Auto Keystone On Response [STX]OAK[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OAK[ETX] Notes
This command will Enable or Disable the Automatic
Keystone Adjustment when the Auto...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-24.png "Page 25
Panasonic RS-232 Protocol for LCD Projector 23 23 5.10 Auto Keystone (OAK)
Name Automatic Keystone Syntax [STX]OAK:p1[ETX] Function Sets the Auto Keystone Mode for the Auto Set-up
feature. Parameters Code Description
0 Auto Keystone Off
1 Auto Keystone On Response [STX]OAK[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OAK[ETX] Notes
This command will Enable or Disable the Automatic
Keystone Adjustment when the Auto...")
Panasonic RS-232 Protocol for LCD Projector 23 23 5.10 Auto Keystone (OAK) Name Automatic Keystone Syntax [STX]OAK:p1[ETX] Function Sets the Auto Keystone Mode for the Auto Set-up feature. Parameters Code Description 0 Auto Keystone Off 1 Auto Keystone On Response [STX]OAK[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]OAK[ETX] Notes This command will Enable or Disable the Automatic Keystone Adjustment when the Auto...
Page 26
![Page 26
Panasonic RS-232 Protocol for LCD Projector 24 24 5.11 Auto RGB Input (OAR)
Name Automatic RGB Input Syntax [STX]OAR:p1[ETX] Function Sets the Auto RGB Input Mode for the Auto Set-up
feature. Parameters Code Description
0 Auto RGB Input Off
1 Auto RGB Input On Response [STX]OAR[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OAR[ETX] Notes
This command will Enable or Disable the Automatic
RGB Input Adjustment when...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-25.png "Page 26
Panasonic RS-232 Protocol for LCD Projector 24 24 5.11 Auto RGB Input (OAR)
Name Automatic RGB Input Syntax [STX]OAR:p1[ETX] Function Sets the Auto RGB Input Mode for the Auto Set-up
feature. Parameters Code Description
0 Auto RGB Input Off
1 Auto RGB Input On Response [STX]OAR[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OAR[ETX] Notes
This command will Enable or Disable the Automatic
RGB Input Adjustment when...")
Panasonic RS-232 Protocol for LCD Projector 24 24 5.11 Auto RGB Input (OAR) Name Automatic RGB Input Syntax [STX]OAR:p1[ETX] Function Sets the Auto RGB Input Mode for the Auto Set-up feature. Parameters Code Description 0 Auto RGB Input Off 1 Auto RGB Input On Response [STX]OAR[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]OAR[ETX] Notes This command will Enable or Disable the Automatic RGB Input Adjustment when...
Page 27
![Page 27
Panasonic RS-232 Protocol for LCD Projector 25 25 5.12 Auto Set-up (OAS)
Name Auto Set-up Syntax [STX]OAS[ETX] Function This command will perform an Auto Set-up of the
projector. Parameters None Response [STX]OAS[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OAS[ETX] Notes
If the Auto options are on such as Auto RGB, Auto
Keystone, Auto YPbPr, Auto RGB Input the projector
will adjust itself to the input. If any one of...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-26.png "Page 27
Panasonic RS-232 Protocol for LCD Projector 25 25 5.12 Auto Set-up (OAS)
Name Auto Set-up Syntax [STX]OAS[ETX] Function This command will perform an Auto Set-up of the
projector. Parameters None Response [STX]OAS[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OAS[ETX] Notes
If the Auto options are on such as Auto RGB, Auto
Keystone, Auto YPbPr, Auto RGB Input the projector
will adjust itself to the input. If any one of...")
Panasonic RS-232 Protocol for LCD Projector 25 25 5.12 Auto Set-up (OAS) Name Auto Set-up Syntax [STX]OAS[ETX] Function This command will perform an Auto Set-up of the projector. Parameters None Response [STX]OAS[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]OAS[ETX] Notes If the Auto options are on such as Auto RGB, Auto Keystone, Auto YPbPr, Auto RGB Input the projector will adjust itself to the input. If any one of...
Page 28
![Page 28
Panasonic RS-232 Protocol for LCD Projector 26 26 5.13 Auto YPbPr (OAY)
Name Automatic YPbPr Syntax [STX]OAY:p1[ETX] Function Sets the Auto YPbPr Mode for the Auto Set-up feature. Parameters Code Description
0 Auto YPbPr Off
1 Auto YPbPr On Response [STX]OAY[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OAY[ETX] Notes
This command will Enable or Disable the Automatic
YPbPr Adjustment when the Auto Set-up (OAS) is...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-27.png "Page 28
Panasonic RS-232 Protocol for LCD Projector 26 26 5.13 Auto YPbPr (OAY)
Name Automatic YPbPr Syntax [STX]OAY:p1[ETX] Function Sets the Auto YPbPr Mode for the Auto Set-up feature. Parameters Code Description
0 Auto YPbPr Off
1 Auto YPbPr On Response [STX]OAY[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OAY[ETX] Notes
This command will Enable or Disable the Automatic
YPbPr Adjustment when the Auto Set-up (OAS) is...")
Panasonic RS-232 Protocol for LCD Projector 26 26 5.13 Auto YPbPr (OAY) Name Automatic YPbPr Syntax [STX]OAY:p1[ETX] Function Sets the Auto YPbPr Mode for the Auto Set-up feature. Parameters Code Description 0 Auto YPbPr Off 1 Auto YPbPr On Response [STX]OAY[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]OAY[ETX] Notes This command will Enable or Disable the Automatic YPbPr Adjustment when the Auto Set-up (OAS) is...
Page 29
![Page 29
Panasonic RS-232 Protocol for LCD Projector 27 27 5.14 Background Color (OBC)
Name Background Color Syntax [STX]OBC:p1[ETX] Function This command will set the color of the background. Parameters Code Description
0 Blue Background
1 Black Background Response [STX]OBC[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OBC[ETX] Notes
The background will be displayed when no input signal
is applied or selected....](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-28.png "Page 29
Panasonic RS-232 Protocol for LCD Projector 27 27 5.14 Background Color (OBC)
Name Background Color Syntax [STX]OBC:p1[ETX] Function This command will set the color of the background. Parameters Code Description
0 Blue Background
1 Black Background Response [STX]OBC[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OBC[ETX] Notes
The background will be displayed when no input signal
is applied or selected....")
Panasonic RS-232 Protocol for LCD Projector 27 27 5.14 Background Color (OBC) Name Background Color Syntax [STX]OBC:p1[ETX] Function This command will set the color of the background. Parameters Code Description 0 Blue Background 1 Black Background Response [STX]OBC[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]OBC[ETX] Notes The background will be displayed when no input signal is applied or selected....
Page 30
![Page 30
Panasonic RS-232 Protocol for LCD Projector 28 28 5.15 Cursor Down (OCD)
Name Cursor Down Syntax [STX]OCD[ETX] Function Functions like the Down Button on the IR Remote and
the Control Panel. Parameters None Response [STX]OCD[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OCD[ETX] Notes
This command is used to Navigate Menus and for
some Adjustments
Projector Model to Command Compatibility
Model
Number PT-L711U...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-29.png "Page 30
Panasonic RS-232 Protocol for LCD Projector 28 28 5.15 Cursor Down (OCD)
Name Cursor Down Syntax [STX]OCD[ETX] Function Functions like the Down Button on the IR Remote and
the Control Panel. Parameters None Response [STX]OCD[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]OCD[ETX] Notes
This command is used to Navigate Menus and for
some Adjustments
Projector Model to Command Compatibility
Model
Number PT-L711U...")
Panasonic RS-232 Protocol for LCD Projector 28 28 5.15 Cursor Down (OCD) Name Cursor Down Syntax [STX]OCD[ETX] Function Functions like the Down Button on the IR Remote and the Control Panel. Parameters None Response [STX]OCD[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]OCD[ETX] Notes This command is used to Navigate Menus and for some Adjustments Projector Model to Command Compatibility Model Number PT-L711U...