Panasonic LCD Projector PT-L785U Operating Instructions

ENGLISH
Before operating this product, please read the instructions carefully and save this
manual for future use.
LCD Projector 
Operating Instructions
Model No.PT-L785U
TQBJ 0150
Commercial Use
VIDEORGB
ALL SETA
R 

2-ENGLISH
IMPORTANT SAFETY NOTICE Dear Panasonic Customer:
This instruction booklet provides all the necessary operating information that you
might require. We hope it will help you to get the most out of your new product,
and that you will be pleased with your Panasonic LCD projector.
The serial number of your product may be found on its bottom. You should note
it in the space provided below and retain this booklet in case service is required.
Model number:  PT-L785U
Serial number:
WARNING: TO REDUCE...

ENGLISH-3
Preparation
WARNING:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee...

4-ENGLISH
Contents
Preparation
IMPORTANT SAFETY NOTICE ...2
Precautions with regard to safety...5
Accessories .................................9
Before use ..................................10
Location and function of each part...12
Getting started
Setting-up ...................................18
Projection methods, Projector
position, Projection distances
Connections ...............................20
Connecting to video equipment,
Connecting to computer
Preparation for the remote
control unit...

ENGLISH-5
Preparation
Precautions with regard to safety
WARNING
If you notice smoke, strange smells or noise coming from the projector,
disconnect the power cord plug from the wall outlet.
BDo not continue to use the projector in such cases, otherwise fire or
electric shocks could result.
BCheck that no more smoke is coming out, and then contact an Authorized
Service Center for repairs.
BDo not attempt to repair the projector yourself, as this can be dangerous.
Do not install this projector in a place...

6-ENGLISH
Do not do anything that might damage the power cord or the power cord
plug.
BDo not damage the power cord, make any modifications to it, place it near
any hot objects, bend it excessively, twist it, pull it, place heavy objects on
top of it or wrap it into a bundle.
BIf the power cord lead is used while damaged, electric shocks, short-
circuits or fire may result.
BAsk an Authorized Service Center to carry out any repairs to the power
cord that might be necessary.
Do not handle the power cord...

ENGLISH-7
Preparation
Do not look into the lens while the projector is being used.
BStrong light is emitted from the projector’s lens. If you look directly into this
light, it can hurt and damage your eyes.
BBe especially careful not to let young children look into the lens. In
addition, turn off the power and disconnect the power cord plug when you
are away from the projector.
Keep the remote control unit out of the reach of children, and do not
look into the laser beam or point it towards other...

8-ENGLISH
Do not place any heavy objects on top of the projector.
BFailure to observe this may cause the projector to become unbalanced
and fall, which could result in damage or injury.
Do not short-circuit, heat or disassemble the batteries or place them
into water or fire.
BFailure to observe this may cause the batteries to overheat, leak, explode
or catch fire, and burns or other injury may result.
When inserting the batteries, make sure the polarities (+ and -) are
correct.
BIf the batteries are...

ENGLISH-9
Preparation
Remote control unit
(N2QAEA000022 x1)AAA batteries for
remote control unit (x2)RGB signal cable 
[3.0 m (9´10˝),
K1HB15FA0001 x1]
Accessories
Check that all of the accessories shown below have been included with your
projector.
VIDEORGB
ALL SETA
Power cord
(K2CG3FZ00008 x 1)Cable cover
(TXFKR01VJX7 x1)
NOTICE:
BThis product has a High Intensity Discharge (HID) lamp that contains a
small amount of mercury. It also contains lead in some components.
Disposal of these materials may be...

10-ENGLISH
Before use
Caution when moving the projector
Be sure to attach the lens cover before moving the projector.
The projection lens is extremely susceptible to vibration and shocks. Be
careful not to subject it to excessive vibration and shock when moving the
projector.
Cautions regarding setting-up
Avoid setting up in places which are subject to vibration or shocks.
The internal parts can be damaged, which may cause malfunctions or
accidents.
Do not set up the projector near high-voltage power...