Panasonic Lf 1 Manual

Others
List of LCD monitor/Viewfinder displaysVQT5A33
- 261 -
Current date/time
World time (→127)
Name (→112, 124)
Age in years/months (→112, 124)
Destination settings (→126)
Travel elapsed days  (→126)
Focus range (→79)
Zoom (→71)    

Others
List of LCD monitor/Viewfinder displaysVQT5A33
- 262 -
 Retouch
 Retouch
Screens shown here are only examples. The actual display may vary.
In playback
Playback Mode (→145)
Protected picture (→167)
Favorites (→165)
Date/text stamped display  
(→138, 159)
Color Mode (→136)
Retouched picture  (→153, 154)
Picture Size (→128)
Quality (→129)
Battery capacity (→17)
Rec Format (→139)
Rec Quality (→139)
30s Motion picture recording time
* 
(→40)
Burst (→143)
Histogram (→57)
Retouch (→153)
Motion picture...

Others
List of LCD monitor/Viewfinder displaysVQT5A33
- 263 -
 Retouch
 Retouch
Print settings (→166)
With location information (→156)
Acquiring information icon  (→143)
Monitor Luminance (→56)
Recording Mode (→25)
Flash Mode (→75)
White Balance (→131)
Exposure Compensation  (→90)
Creative control adjustment 
display (→97)
ISO Sensitivity (→130)
F3.3 Aperture value  (→38, 92, 94)
1/60 Shutter speed (→38, 93, 94)
Folder/File number  (→44, 253)
Picture number/Total pictures (→44)
Recording date/time
World...

Others
Message displays
VQT5A33- 264 -
The following explains the meaning of major messages displayed on the LCD monitor or 
viewfinder, and how to respond to them.
[This memory card cannot be used]
 ●Not compatible with the camera. Use a compatible card.
[Some pictures cannot be deleted]     [This picture cannot be deleted]
 ●Non-DCF pictures (→44) cannot be deleted. →  Save needed da
ta on a computer or other device, and then use [Format] on the camera.  (→64)
[No additional selections can be made]...

Others
Message displaysVQT5A33
- 265 -
[Memory card parameter error]
 ●Card is not of SD standard. ●When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are 
supported.
[Read Error] / [Write Error]     [Please check the card]
 ●Data read has failed. →  Check whether card has been insert ed correctly (→19).
 ●Data write has failed. →  Turn off the camera and remove the card. Reinsert the card and turn the camera on again. 
 ●Card may possibly be damaged. ●Try with a different...

Others
Message displaysVQT5A33
- 266 -
[Failed to connect wireless access point] / [Connection failed] / [No destination found]
 ●Check following regarding the wireless access point. →  The wireless ac cess point information set on this unit is wrong. Check the authentication type, 
encryption type, and encryption key. (→232)
 →  Power of the wireless access point is

 not turned on.
 →  Setting of the wireless access point i

s not supported by this unit.
 ●Check the network setting of the destination....

Others
Message displaysVQT5A33
- 267 -
[Unavailable. Please set Login settings on LUMIX CLUB web site.]
 ●Login to the “LUMIX CLUB” from your smartphone or PC, and set the login details of the destination 
WEB service.
[Both picture and video sharing service cannot be selected together]
 ●WEB services designed only for pictures, and WEB services designed only for motion pictures 
cannot be selected at the same time. Deselect one of the services.
[Cannot get IP address. Please set wireless AP’s IP address...

Others
Q&A  TroubleshootingVQT5A33
- 268 -
Try checking these items (→268 - 278) first.
If the problem persists, performing [Reset] in the [Setup] menu may resolve the issue 
(→61). (Note that except for some items such as [Clock Set], all settings are returned to 
their values at the time of purchase.)
Battery, power
The charging lamp turns off before the battery is fully charged. ●Charging is being performed in a place with extremely high or low temperature.  →  Reconnect the USB connection cable...

Others
Q&A  TroubleshootingVQT5A33
- 269 -
Recording
Cannot record pictures. ●Built-in memory/card is full. →  Free space by deleting unwanted pic tures (→50).
Recorded pictures look white. ●Lens is dirty (fingerprints, etc.). →  Turn the camera on to extract lens barrel, and clean lens surface with a soft, dry cloth.
 ●Lens is foggy (→7).
Recorded pictures are too bright/too dark. ●Adjust the exposure (→90). ●[Min. Shtr Speed] is set to fast speed. Check the setting  (→135).
Some pictures are taken when...

Others
Q&A  TroubleshootingVQT5A33
- 270 -
Recording (continued)
Reddish horizontal streaks appear on the LCD monitor during recording. ●This is characteristic of MOS sensors which serve as the camera’ s pickup sensors. It appears when 
the subject has a bright part. Some unevenness may occur in the surrounding areas, but this is not 
a malfunction. It is recorded in motion pictures but is not recorded on still pictures.
 ●It is recommended that you take pictures while taking care not to expose the...