Panasonic Lf 1 Manual

Basics
Deleting picturesVQT5A33
- 51 -
To delete multiple (up to 100)/To delete all pictures
A picture group  (→143) is handled as 1 picture. (All the pictures in the selected picture group 
are deleted)
Press [  ] button while viewing a picture 
Use   to select [Delete Multi]/[Delete All] and press 
[MENU/SET]
 • Items can also be selected by turning the control dial.
 ●[Delete Multi]
Use cursor button to select picture and press [DISP.] button
 Picture selected
 • To cancel → Press [DISP.] button...

Basics
Setting the menu
VQT5A33- 52 -
Refer to the procedure below for an example on how to operate the menus.
Example: Changing [AF Mode] in the [Rec] menu in [Program AE] Mode
Press [MENU/SET]
Use cursor button to select [Rec] menu and press [MENU/SET]
 • Items can also be selected by turning the control dial.
Press   to select [AF Mode] and then press [MENU/SET]
Pages (The pages can also be selected with the zoom lever.)
Menu items
Menu description
Operation guide
Press   to select a setting, and then...

Basics
Setting the menuVQT5A33
- 53 -
Menu type
 ●In recording mode ●In playback mode
[Rec] You can perform settings such as tones, Sensitivity, Aspect Ratio, 
and Picture Size.
[Motion Picture] You can select the recording format and picture quality and other 
settings.
[Setup] You can perform settings for convenience of use such as the clock 
setting and changing of the beep sounds.
[Wi-Fi] You can perform settings required to use a Wi-Fi connection and 
Wi-Fi functions.
[Playback Mode] You can choose...

Basics
Using the [Setup] menu
VQT5A33- 54 -
[Clock Set], [Economy] and [Auto Review] are important for clock setting and 
battery life. Please check these before use.
 • For the setting procedures of the menu. (→52)
 ●In [Intelligent Auto] Mode, only [Clock Set], [World Time], [Airplane Mode], [Beep], 
[Composition Guide], [Stabilizer Demo.] and [Language] are set.
[Clock Set]
Set time, date, and display format. (→23)
[World Time]
Set the local time at travel destination.  (→127)
[Travel Date]
Record the...

Basics
Using the [Setup] menuVQT5A33
- 55 -
 • For the setting procedures of the menu.  (→52)
[Speaker Volume]
Adjust volume of sound from speakers (7 levels).
 ■Settings: [0] / [1] / [2] / [3] / [4] / [5] / [6]
 ●Cannot be used to adjust TV speaker volume when connected to TV.
[Cust.Set Mem.]
Register the current camera settings.  (→115)
[Fn Button Set]
Register frequently used functions from the [Rec] menu, [Setup] menu or other menus to 
the [Fn] button for faster operation. (→117)
[Control Ring Set]...

Basics
Using the [Setup] menuVQT5A33
- 56 -
 • For the setting procedures of the menu.  (→52)
[Monitor Luminance]
Make LCD monitor easier to see.
 ■Settings
[Auto Power Monitor] The brightness is adjusted automatically depending on how bright it 
is around the camera.
[Power Monitor]
The brightness becomes higher than usual for easy viewing outdoors.
[OFF] —
 ●Cannot select [Auto Power Monitor] in playback mode. ●[Power Monitor] returns to ordinary brightness if there is no operation for 30 seconds 
when...

Basics
Using the [Setup] menuVQT5A33
- 57 -
 • For the setting procedures of the menu.  (→52)
[Histogram]
Displays distribution of brightness in picture – e.g. 
if the graph peaks at the right, this means there are 
several bright areas in the picture. A peak in the center 
represents correct brightness (correct exposure). This 
can be used as a reference for exposure correction, etc.
(Example)
Dark ← OK → Bright
 ■Settings: [ON] / [OFF]
 ●When the histogram is not the same as that of the recorded...

Basics
Using the [Setup] menuVQT5A33
- 58 -
 • For the setting procedures of the menu.  (→52)
[Remaining Disp.]
Switch the display between the remaining number of still pictures you can take or the 
remaining recording time of a motion picture that you can record for the available card or 
built-in memory.
 ■Settings
Displays the number of pictures that can be recorded.
Displays the remaining recording time.
[Lens Resume]
 ●[Zoom Resume]
Remember the zoom position when turning the camera off.
 ■Settings:...

Basics
Using the [Setup] menuVQT5A33
- 59 -
 • For the setting procedures of the menu.  (→52)
[Economy]
Turn off the camera or make the LCD monitor go dark while not using the camera to 
minimize battery consumption.
 ●[Auto Power Off]
Automatically shut off the camera while not in use.
 ■Settings: [2MIN.] / [5MIN.] / [10MIN.] / [OFF]
 ●To restore →  T urn on the camera again. ●Cannot be used in the following cases: • When connected to computer/printer • During motion picture recording/playback • During...

Basics
Using the [Setup] menuVQT5A33
- 60 -
 • For the setting procedures of the menu.  (→52)
[Auto Review]
Automatically display still pictures immediately after taking them.
 ■Settings
[1SEC] / [2SEC] Displays the playback screen for the set time before automatically returning to 
the recording screen.
[HOLD] Keeps the automatic playback screen displayed until [MENU/SET] is pressed.
[OFF] —
 ●For [Intelligent Auto] Mode, the setting is fixed to [2SEC]. ●Motion pictures cannot be automatically...