Home > Panasonic > Digital Camera > Panasonic Lumix DMC FH1 User Manual

Panasonic Lumix DMC FH1 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Lumix DMC FH1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11(ENG) VQT2K50
    11 Camera ON/OFF switch
    12 Zoom lever
    13 Speaker
    14 Microphone
    15 Shutter button
    16 Intelligent auto button
    17 Hand strap eyelet
    •Be sure to attach the hand strap when 
    using the camera to ensure that you will 
    not drop it.
    18 Lens barrel
    19 [AV OUT/DIGITAL] socket
    20 Tripod receptacle
    •When you use a tripod, make sure the 
    tripod is stable when the camera is 
    attached to it.
    21 Card/Battery door
    22 Release lever
    23 DC coupler cover
    •When using an AC adaptor, ensure that 
    the Panasonic DC coupler (DMW-DCC4; 
    optional) and AC adaptor (DMW-AC5PP; 
    optional) are used.
    •We recommend you use a battery with 
    sufficient battery power or the AC adaptor 
    when recording motion pictures.
    •If while recording motion pictures using the 
    AC adaptor and the power supply is cut off 
    due to a power outage or if the AC adaptor 
    is disconnected etc., the motion picture 
    being recorded will not be recorded.
    12
    13 14 15 16 11
    18
    19
    17
    21
    2223
    20
    DMC-FH1&FH3&FH20-VQT2K50_eng.book  11 ページ  2009年12月16日 水曜日 午後6時12分
    Downloaded From camera-usermanual.com Panasonic Manuals 
    						
    							VQT2K50 (ENG)12
    Charging the Battery
    ∫About batteries that you can use with this unitSupplied battery or dedicated optional batteries (DMW-BCF10PP) can be 
    used with this unit.
    •Use the dedicated charger and battery.•The camera has a function for distinguishing batteries which can be used 
    safely. The dedicated battery [the supplied battery or DMW-BCF10PP 
    (optional)] supports this function. The only batteries suitable for use with 
    this unit are genuine Panasonic products and batteries manufactured by 
    other companies and certified by Panasonic. (Batteries which do not 
    support this function cannot be used). Panasonic cannot in any way 
    guarantee the quality, performance or safety of batteries which have been 
    manufactured by other companies and are not genuine Panasonic 
    products.
    ∫Charging
    •The battery is not charged when the camera is shipped. Charge the battery 
    before use.
    •Charge the battery with the charger indoors.•Charge the battery in a temperature between 10 oC to 35 oC (50 oF to 95 oF). 
    (The battery temperature should also be the same.) It has been found that counterfeit battery packs which look very similar 
    to the genuine product are made available to purchase in some markets. 
    Some of these battery packs are not adequately protected with internal 
    protection to meet the requirements of appropriate safety standards. 
    There is a possibility that these battery packs may lead to fire or 
    explosion. Please be advised that we are not liable for any accident or 
    failure occurring as a result of use of a counterfeit battery pack. To 
    ensure that safe products are used we would recommend that a genuine 
    Panasonic battery pack is used.
    Attach the battery paying 
    attention to the direction of the 
    battery.
    DMC-FH1&FH3&FH20-VQT2K50_eng.book  12 ページ  2009年12月16日 水曜日 午後6時12分
    Downloaded From camera-usermanual.com Panasonic Manuals 
    						
    							13(ENG) VQT2K50
    ∫Charging time
    ∫ Approximate operating time and number of recordable pictures
    Recording conditions by CIPA standard•CIPA is an abbreviation of [Camera & Imaging Products Association].•Normal Picture Mode•Temperature: 23 oC (73.4 oF)/Humidity: 50% when LCD monitor is on.•Using a Panasonic SD Memory Card (32 MB).•Starting recording 30 seconds after the camera is turned on. (When the Optical 
    Image Stabilizer function is set to [AUTO].)
    •Recording once every 30 seconds  with full flash every second recording.•Rotating the zoom lever from Tele to Wide or vice versa in every recording.•Turning the camera off every 10 recordings and leaving it until the temperature 
    of the battery decreases.
    Connect the charger to the 
    electrical outlet.
    •Charging starts when the [CHARGE] 
    indicator A lights green.
    •Charging is properly complete when 
    the [CHARGE] indicator  A turns off.
    Detach the battery after charging is completed.
    Supplied batteryOptional battery
    Charging time Approx. 100 min Approx. 130 min
    Supplied batteryOptional battery
    Capacity of the 
    battery 740mAh 940mAh
    Number of recordable 
    pictures Approx. 300 pictures 
    (DMC-FH20)
    Approx. 310 pictures 
    (DMC-FH3/DMC-FH1) Approx. 380 pictures 
    (DMC-FH20)
    Approx. 400 pictures 
    (DMC-FH3/DMC-FH1)
    Recording time Approx. 150 min 
    (DMC-FH20)
    Approx. 155 min 
    (DMC-FH3/DMC-FH1) Approx. 190 min 
    (DMC-FH20)
    Approx. 200 min 
    (DMC-FH3/DMC-FH1)
    Playback time Approx. 280 min Approx. 360 min
    DMC-FH1&FH3&FH20-VQT2K50_eng.book  13 ページ  2009年12月11日 金曜日 午後1時28分
    Downloaded From camera-usermanual.com Panasonic Manuals 
    						
    							VQT2K50 (ENG)14
    About the Built-in Memory/the Card
    •Memory size: Approx. 40 MB•The built-in memory can be used as a temporary storage device when the card 
    being used becomes full.
    •The access time for the built-in memory may be longer than the access time for 
    a card.
    The following cards which conform to the SD video standard can be used with this 
    unit.
    (These cards are indicated as card  in the text.)
    •Only cards bearing the SDHC logo (indicating that the card conforms to SD 
    video standards) may be used as 4 GB to 32 GB cards.
    •Only cards bearing the SDXC logo (indicating that the card conforms to SD 
    video standards) may be used as 48 GB to 64 GB cards.
    •Use a card with SD Speed Class¢ with “Class 6” or higher when recording 
    motion pictures.
    ¢ SD speed class is the speed standard regarding continuous writing.
    •Please confirm the latest information on the following website.
    http://panasonic.jp/support/global/cs/dsc/
    (This Site is English only.)
    Note
    •Keep the Memory Card out of reach of children to prevent swallowing.
    Built-in Memory
    Card
    Type of card which can 
    be used with this unitRemarks
    SD Memory Card (8 MB 
    to 2 GB)•SDHC Memory Cards and SDXC Memory Cards 
    can be used only in equipment that is compatible 
    with their respective formats.
    •Check that the PC and other equipment are 
    compatible when using the SDXC Memory Cards.
    http://panasonic.net/avc/sdcard/information/
    SDXC.html
    SDHC Memory Card 
    (4 GB to 32 GB)
    SDXC Memory Card 
    (48 GB to 64 GB)
    VQT2K50~Body1_P_eng.fm  14 ページ  2009年12月23日 水曜日 午後1時26分
    Downloaded From camera-usermanual.com Panasonic Manuals 
    						
    							15(ENG) VQT2K50
    Inserting and Removing the Card 
    (optional)/the Battery
    •Check that this unit is turned off.•We recommend using a Panasonic card.
    Slide the release lever in the 
    direction of the arrow and open 
    the card/battery door.
    •Always use genuine Panasonic 
    batteries (CGA-S/106B; supplied or 
    DMW-BCF10PP; optional).
    •If you use other batteries, we cannot 
    guarantee the quality of this product.
    Battery: Insert until it is locked by 
    the lever A being careful about 
    the direction you insert it. Pull the 
    lever A in the direction of the 
    arrow to remove the battery.
    Card: Push it fully until it clicks 
    being careful about the direction 
    you insert it. To remove the card, 
    push the card until it clicks, then 
    pull the card out upright.
    B : Do not touch the connection terminals of the card.•The card may be damaged if it is not fully inserted.
    1:Close the card/battery door.
    2 :Slide the release lever in the 
    direction of the arrow.
    VQT2K50~Body1_P_eng.fm  15 ページ  2009年12月11日 金曜日 午後2時1分
    Downloaded From camera-usermanual.com Panasonic Manuals 
    						
    							VQT2K50 (ENG)16
    Setting Date/Time (Clock Set)
    •The clock is not set when the camera is shipped.
    Turn the camera on.
    A[MENU/SET] button
    B Cursor buttons
    Press [MENU/SET].
    Press  2/1 to select the items (year, 
    month, day, hour, minute, display 
    sequence or time display format), 
    and press  3/4 to set.
    ‚: Cancel without setting the clock.
    Press [MENU/SET] to set.
    Press [MENU/SET].
    •Press [‚] to return to the settings screen.
    Select [CLOCK SET] in the [REC] or [SETUP] menu, and press  1.
    •It can be changed in steps 3, 4 and 5 to set the clock.
    Changing the clock setting
    DMC-FH1&FH3&FH20-VQT2K50_eng.book  16 ページ  2009年12月22日 火曜日 午後5時8分
    Downloaded From camera-usermanual.com Panasonic Manuals 
    						
    							17(ENG) VQT2K50
    Setting the Menu
    This section describes how to select the Normal Picture Mode settings, and the 
    same setting can be used for the [PLAYBACK] menu and [SETUP] menu as well.
    Example: Setting [AF MODE] from [
    Ø] to [š] in the Normal Picture Mode
    Press [MENU/SET] to close the menu. Press [MENU/SET] to display the menu.
    .
    Press 3/4 to select [AF MODE], and then 
    press  1.
    •Depending on the item, its setting may not appear or it 
    may be displayed in a different way.
    Press  3/4 to select [ š] and then press 
    [MENU/SET] to set.
    Switching to other menus
    e.g.: Switching to the [SETUP] menu
    1Press [MENU/SET] to display the menu.
    2Press  2.
    3Press 4 to select the [SETUP] menu icon 
    [].
    4Press  1.
    •Select a menu item next and set it.
    DMC-FH1&FH3&FH20-VQT2K50_eng.book  17 ページ  2009年12月21日 月曜日 午後12時12分
    Downloaded From camera-usermanual.com Panasonic Manuals 
    						
    							VQT2K50 (ENG)18
    Selecting the [REC] Mode
    ∫To select a [REC] modes from the [REC] modes list
    ∫ List of [REC] Modes
    ¦Intelligent Auto Mode
    The subjects are recorded using settings automatically selected by the 
    camera.
    Turn the camera on.
    A [MENU/SET] button
    B [REC]/[PLAYBACK] selector switch
    C [MODE] button
    Slide the [REC]/[PLAYBACK] 
    selector switch to [ !].
    Press [MODE].
    Press  3/4 to select the mode.
    Press [MENU/SET].
    !Normal Picture Mode
    The subjects are recorded using your own settings.
    My Scene Mode
    Pictures are taken using previously registered recording scenes.
    ÛScene Mode
    This allows you to take pictures that match the scene being recorded.
    $Motion Picture Mode
    This mode allows you to record motion pictures with audio.
    DMC-FH1&FH3&FH20-VQT2K50_eng.book  18 ページ  2009年12月16日 水曜日 午後6時12分
    Downloaded From camera-usermanual.com Panasonic Manuals 
    						
    							19(ENG) VQT2K50
    [REC] Mode: ñ
    Taking pictures using the automatic 
    function 
    (ñ:Intelligent Auto Mode)
    The camera will set the most appropriate settings to match the subject and the 
    recording conditions so we recommend this mode for beginners or those who 
    want to leave the settings to the camera and take pictures easily.
    Slide the [REC]/[PLAYBACK] 
    selector switch to [ !].
    Press [ ¦] A.
    •Pressing [ ¦] again takes you back to the 
    previous mode.
    Hold the camera gently with both hands, keep your arms 
    still at your side and stand with your feet slightly apart.
    Press the shutter button B halfway 
    to focus.
    •The focus indication  1 (green) lights when 
    the subject is focused.
    •The AF area  2 is displayed around the 
    subject’s face by the Face Detection function. 
    In other cases, it is displayed at the point on 
    the subject which is in focus.
    •The focus range is 5 cm (0.17 feet) (Wide)/
    1 m (3.28 feet) (Tele) to ¶ .
    Press the shutter button fully (push it in further), and take 
    the picture.
    
    1
    2
    DMC-FH1&FH3&FH20-VQT2K50_eng.book  19 ページ  2009年12月21日 月曜日 午前11時59分
    Downloaded From camera-usermanual.com Panasonic Manuals 
    						
    							VQT2K50 (ENG)20
    When the camera identifies the optimum scene, the icon of the scene concerned 
    is displayed in blue for 2 seconds, after which its color changes to the usual red.
    •[¦] is set if none of the scenes are applicable, and the standard settings are 
    set.
    •When [ ] or [ ] is selected, the camera automatically detects a person’s face, 
    and it will adjust the focus and exposure.  (Face Detection)
    Scene detection
    ¦> [i-PORTRAIT]
    [i-SCENERY]
    [i-MACRO]
    [i-NIGHT PORTRAIT]
    •Only when [ ] is selected
    [i-NIGHT SCENERY]
    [i-SUNSET]
    DMC-FH1&FH3&FH20-VQT2K50_eng.book  20 ページ  2009年12月11日 金曜日 午後1時28分
    Downloaded From camera-usermanual.com Panasonic Manuals 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Lumix DMC FH1 User Manual