Panasonic Monitor Bt Lh2600w Owners Manual

Operating Instructions
LCD Video Monitor
BT- P
Model No. BT- E
S0506M1076 -H
Printed in JapanVQT0X79-1ENGLISHD
Before operating this product, please read the instructions carefully and save this manual for future use.  

2
indicates safety information.
gTHIS EQUIPMENT MUST BE GROUNDED
To ensure safe operation, the three-pin plug must 
be inserted only into a standard three-pin power 
outlet which is effectively grounded through 
normal household wiring. Extension cords used 
with the equipment must have three cores and be 
correctly wired to provide connection to the 
ground. Wrongly wired extension cords are a 
major cause of fatalities. The fact that the 
equipment operates satisfactorily does not imply 
that the power...

3
FCC NOTICE (USA)
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose...

4
Read this first ! (for BT-LH2600WE)
indicates safety information.
Operating precaution
Operation near any appliance which generates strong magnetic fields may give rise to noise in the video and 
audio signals. If this should be the case, deal with the sit
uation by, for instance, moving the source of the magnetic 
fields away from the unit before operation.
g THIS EQUIPMENT MUST BE EARTHED
To ensure safe operation, the three-pin plug 
must be inserted only into a standard three-pin 
power point which...

5
Read this first ! (for BT-LH2600WE) (continued)
indicates safety information.
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)
This symbol on the products and/or accompanying documents  means that used electrical and electronic products should not 
be mixed with general household waste.
For proper treatment, recovery and recycli ng, please take these products to designat ed collection points,where they will be 
accepted on a free of charge basis....

6
•The liquid crystal portion is manufactured with highly precise technology. It includes over 99.99% effective pixels, 
but 0.01% or less of the pixels are either missing, or have fixed lighting (red, blue, green). This is not a sign of 
malfunction. 
• The liquid crystal protection panel is a specially manufact ured component. Wiping it with a hard cloth, or rubbing 
it vigorously will scratch the surface. 
• If a still image is displayed for a long time, it may cause  temporary generation of...

7
The BT-LH2600W liquid crystal monitor was designed especially for broadcasting service and business use. It is 
equipped with a high performance 26-inch wide liquid crystal display panel. 
gHigh performance liquid crystal panel
This monitor achieves outstanding color reproducti on, a wide viewing angle, and high-speed response. 
g Immediate image output of input signals 
Time lag per field caused by IP conversion
*1 peculiar to LCD panels is eliminated. The period between input and 
picture display is...

8
Video monitor unit
Front view
Rear viewRear panel (J page 10) Power supply ( J page 11)
Front panel (
J page 9)
Fan (J page 21)
Tally (
J page 26, 30)
Controls and Their Functions 

9
POWER switch
This switches the power supply ON/OFF. When the power is ON, the LED (green) lights up. 
INPUT SELECT button
This selects the signal input line. The green LED light above the button indicates the selected input signal. 
VIDEO : Video input
Y/C : Y/C input
SDI1 : Serial digital interface input (HD/SD compatible) 
SDI2 : Serial digital interface input (HD/SD compatible) 
YP
BPR/RGB : Analog component (YPBPR) or RGB input. Also compatible with PC input RGB. 
* When using PC Input, select...

10
SDI (HD/SD) terminal (BNC)
IN1  : This is the SDI input terminal (compatible with HD/SD automatic switching). 
IN2  : This is the SDI input terminal (compatible with HD/SD automatic switching). 
SWITCHED OUT: This is the active through-out terminal for the SDI input signal being displayed on the screen. 
* SDI active through-out 
Signal output results only when [SDI1] or [SDI2] is selected in [INPUT SELECT]. No output results when the selected input 
is not SDI.
 
The terminal is compatible with...