Panasonic Monitor Bt Lh80w Owners Manual

Operating Instructions
LCD Video Monitor
Before operating this product, please read the instructions carefully an\
d save this manual for 
future use.
S0507N0 -M
Printed in JapanVQT1H75
ENGLISH
Model No.    BT-LH80WP
Model No.    BT-LH80WE 

2
Read this first! (For BT-LH80WP)
The lightning flash with arrowhead 
symbol, within an equilateral 
triangle, is intended to alert the 
user to the presence of uninsulated 
“dangerous voltage” within the 
product’s enclosure that may be of 
sufficient magnitude to constitute a 
risk of electric shock to persons.
The exclamation point within an 
equilateral triangle is intended 
to alert the user to the presence 
of important operating and 
maintenance (service) instructions 
in the literature...

3
Read this first! (For BT-LH80WE)
  DO NOT REMOVE PANEL COVERS BY 
UNSCREWING THEM.
   To reduce the risk of electric shock, do not 
remove the covers. No user serviceable parts 
inside.
   Refer servicing to qualified service 
personnel.
WARNING:•  TO REDUCE THE RISK OF FIRE OR 
SHOCK HAZARD, DO NOT EXPOSE THIS 
EQUIPMENT TO RAIN OR MOISTURE.
•  TO REDUCE THE RISK OF FIRE 
OR SHOCK HAZARD, KEEP THIS 
EQUIPMENT AWAY FROM ALL LIQUIDS. 
USE AND STORE ONLY IN LOCATIONS 
WHICH ARE NOT EXPOSED TO THE 
RISK...

4
Read this first! (For BT-LH80WP) . . . . . . . . . . . . . . . 2
Read this first! (For BT-LH80WE) . . . . . . . . . . . . . . . 3
Standard accessory  . . . . . . . . . . . . . . . . . . . . . . . . . 4
Optional unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Precautions for use . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Outline  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Dimensions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

5
Precautions for use
  The liquid crystal parts are fabricated using high-precision technology. The screen has effective pixels 
that cover more than 99.99% of its area, but pixels may be missing or remain permanently lighted (red, 
blue and/or green) in less than 0.01% of the area. This is not indicative of malfunctioning.
  The panel which protects the liquid crystal display has been specially treated.
   Do not wipe it with hard cloths or rub it heavily as this will damage the surface of the panel....

6
Outline
The BT-LH80W is a thin and lightweight liquid crystal monitor designed especia\
lly for broadcasting service and 
business use. It is equipped with a 7.9-inch V (effective display area) liquid crystal display panel.
It can be used as a VF (viewfinder) for broadcasting and business came\
ras made by Panasonic.
  Equipped with a new IP conversion circuit, the circuit processing greatly reduces time delays
    A new I/P conversion circuit has been introduced that converts and generates SD a\
nd...

7
Front panel
Controls and Their Functions
1 POWER switch/lamp
    This switches the power supply ON/OFF. When the power is ON, the LED (green) lights up.
2 INPUT SELECT button
    This selects the signal input line. Each time the button is pressed, the input changes in the following order: 
YP
BPR → VF-YPBPR/VF-VIDEO → VIDEO → SDI.
   YPBPR                : Analog component input
   VF-YPBPR / VF-VIDEO∗1  : Viewfinder input
   VIDEO                : Video input
   SDI∗
2                 : Serial digital...

8
7 REAR TALLY (red)
      Can be lit by a control signal from a GPI/camera.
8 SDI (HD/SD) input terminal (BNC) - option
      This is the SDI input terminal. (Compatible with HD/SD automatic switching)
      • If you want this input, contact the vendor where you purchased the unit.
9 VIDEO/Y input terminal (BNC)
      This is the VIDEO signal (component signal) input terminal/Y input terminal.
10 PBPR input terminal (BNC)
   This is the PBPR signal (analog component signal) input terminal.11 VF terminal...

9
Supplying the power
An Anton/Bauer or V-mount type of battery pack or an external DC power supply can be used to power this 
monitor.
Using the Anton/Bauer type battery pack
1.Install the Anton/Bauer type of battery pack.
Battery pack
2.Insert the battery pack and slide it in the direction 
of the arrow.
Release 
lever
 
To remove the battery pack, slide it in the opposite 
direction to the one in which it was attached while 
keeping the release lever on the battery holder pulled 
down all the way....

123 4
10
Supplying the power (continued)
Using an external DC power supply
1.Connect the external DC power supply to the DC IN 
socket on this unit.
2.Turn “ON” the external DC power supply switch.
(Where the external DC power supply has a power
switch)DC IN socket
External DC power supply
3.Turn “ON” the POWER switch on this unit.
If an external DC power supply is used, then check the 
ratings of the external DC power supply so that they 
are compatible with those of this unit.
Check the pin...