Panasonic Monitoring System BL-MS103 Operating Instructions

							BL-MS103
1
2
3
4
Connect each camera to a power outlet.
PSQW2374ZC    
KK0505CH1056
Connect the BL-WV10A to a power outlet.
Connect the BL-WV10A to a video input
on your TV using the included video cable.Set the TV to the video input corresponding
to the video input terminal connected to
the BL-WV10A.
The video input may be located on the back of
your TV. Refer to the operating instructions
provided with your TV if necessary.
VIDEO 
						

							Operating Instructions
Please read this manual before using and save this manual for future reference.
Wireless Camera
Monitoring System
Panasonic Network Camera Website: http://www.panasonic.com/netcam
for customers in the USA or Puerto Rico
Model No.BL-WV10A 
						

							2
Main Features
Camera Image Monitoring
Simply connect the BL-WV10A to your Panasonic home network cameras (sold 
separately) and to your TV, and you'll be able to view camera images conveniently 
on your TV.
Wireless cameras such as the BL-C30A can be connected as well, meaning you 
won't have to worry about running cables from the BL-WV10A to each camera.
Pan/Tilt Feature
Aim the camera wherever you want by simply pressing the navigator keys on the 
included remote control.
Sensor Alert Feature
The camera's built-in sensor detects motion by sensing temperature changes 
caused naturally by people or animals moving within the sensor's range. When the 
sensor detects motion, the BL-WV10A can alert you by sounding its built-in buzzer 
and by displaying the image from the camera that has detected motion.
This feature is not available with HCM series cameras.
Camera Image Recording
Simply insert an optional SD memory card and you'll be able to record movies and 
pictures of your camera images. Later you can use the remote control to play back 
movies and view pictures on your TV that were recorded by the BL-WV10A.
Privacy Mode Feature
Simply press the camera's PRIVACY button to hide the camera's lens when you 
don't want camera images to be seen.
This feature is not available with HCM series cameras.
System Expansion
Up to 8 cameras can be connected, allowing you to keep an eye on every room 
with just 1 BL-WV10A.
Multi-Camera Monitoring
When multiple cameras are registered, you can view up to 4 camera images at 
once and switch to monitor a specific camera if necessary. 
						

							[For assistance, please call: 1-800-272-7033] 3
Quick Setup
Configuration is quick and easy with the BL-WV10A's Quick Setup feature–connect 
your cameras to the BL-WV10A and Quick Setup will handle the rest.
Recommended Accessories (sold separately)
Compatible router:
• Panasonic BB-HGW700A Network Camera Management System 
Compatible Network Cameras:
• Panasonic BL-C10A, BL-C30A (firmware version 1.22 or higher)
• HCM series (firmware version 1.08 or higher, however, some features 
cannot be used; see page 4 for more information on compatibility).
• Note that the following HCM series cameras are not supported by the BL-
WV10A:
- KX-HCM8
- KX-HCM10
- KX-HCM230
- KX-HCM250
- KX-HCM270
- KX-HCM280
For the latest firmware, visit http://panasonic.co.jp/pcc/products/en/netwkcam/
How to Use This Documentation
The following documentation is included:
Setup Guide
Provides basic instructions for connecting your cameras to the BL-WV10A.
Operating Instructions (this manual)
Provides detailed instructions on BL-WV10A operations, configuration, features, 
etc.
Trademarks
• SD mark is a trademark of the SD Card Association.
• QuickTime and the QuickTime logo are trademarks of Apple 
Computer, Inc.
• All other trademarks identified herein are the property of 
their respective owners. 
						

							4
Camera Compatibility
The following HCM series camera features are not supported by the BL-WV10A.
In order to use the following HCM series camera features with the BL-WV10A, set 
the access settings for the general user (the user profile used by the BL-WV10A to 
access the HCM series camera) as shown below.
For more information, refer to the operating instructions provided with your HCM 
series camera.• Zoom • Listen
• Focus • Talk
• Click to Center Control • View Buffered Image Page
• External Output Control
•IPsec
*1
*1 The BL-WV10A is not compatible with IPsec. To use an HCM series camera with the 
BL-WV10A, make sure the camera's IPsec feature is disabled.
• External Sensor
FeatureAccess Setting
Limit time of Continuous Motion JPEG Unlimited
Pan/Tilt Control Allow
Preset Control Allow
Brightness Control Allow
Change Refresh Interval Allow
Change Resolution Allow
Change Quality Allow 
						

							[For assistance, please call: 1-800-272-7033] 5
IMPORTANT SAFETY INSTRUCTIONS
When using this product, basic safety precautions should always be followed to 
reduce the risk of fire, electric shock, or personal injury.
1.Read and understand all instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not install this product near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) that produce heat.
6.Protect the AC adaptor cord and AC cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the point where they exit 
from this product.
7.The AC cord is used as the main disconnect device. Ensure that the AC outlet 
is located/installed near the product and is easily accessible.
8.Use only the included Panasonic AC adaptor and AC cord.
9.The AC adaptor must remain connected at all times. (It is normal for the 
adaptor to feel warm during use.)
10.To prevent the risk of fire or electrical shock, do not expose this product to rain 
or any type of moisture.
11.Do not touch the product or the AC adaptor and AC cord during lightning 
storms.
12.Unplug this product when unused for a long period of time.
13.Refer all servicing to qualified service personnel. Servicing is required when 
the unit has been damaged in any way, such as when the AC adaptor, AC cord 
or plug is damaged, the unit does not operate normally, or after the unit has 
been dropped.
14.Certain Network Cameras are intended for indoor use only. Never use an 
indoor camera outdoors.
15.Unplug this unit from power outlets if it emits smoke, an abnormal smell or 
makes unusual noise. These conditions can cause fire or electric shock. 
Confirm that smoke has stopped and contact an authorized service center.
SAVE THESE INSTRUCTIONS 
						

							6
Notice Regarding Battery Safety
1.Do not open or mutilate the batteries. Released electrolyte from the batteries 
is corrosive and may cause burns or injury to the eyes or skin. The electrolyte 
may be toxic if swallowed. If electrolyte comes in contact with the eyes, flush 
eyes with water.
2.Do not mix old and new batteries.
3.Do not heat or expose to flame.
4.Do not take apart or short circuit.
5.Do not attempt to recharge alkaline or manganese batteries.
6.Remove if the remote control is not going to be used for a period of time. Store 
in a cool, dark place.
7.Use only non-rechargeable AA batteries. When replacing the batteries, we 
recommend using the same type of Panasonic batteries that are included with 
this product. See the Setup Guide for more information.
Notice Regarding Wireless Communications
1.To avoid wireless communication interference and instability, do not use this 
product near the following devices.
• Wireless transmitters (radio transmitters, cellular transmitters, etc.)
• Wireless devices which operate at 2.4 GHz (security equipment, POS 
systems, cordless telephones, etc.)
•Microwave ovens
2.Wireless communication range and quality may be affected if the following 
types of objects are located between or near this product and other wireless 
devices connected to this product. In the event that images do not refresh at 
a regular rate, become cut off, etc., relocate this product, the other wireless 
devices, or the obstacles (if possible) for more stable wireless 
communications.
• Metal door shutters
• Walls made of concrete, stone, or brick, or walls which contain aluminium-
based heat insulation
• Multiple walls
• Fire doors and glass
• Steel racks or shelves
3.Place cameras and this product at least 2 m (6.5 ft.) away from radios. Do not 
connect cameras and this product to a power outlet used by a radio. 
						

							[For assistance, please call: 1-800-272-7033] 7
FCC and Other Information
This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This product operates at frequencies that may cause interference to nearby TVs 
and VCRs. To minimize or prevent such interference, the base of this product 
should not be placed near or on top of a TV or VCR. If interference is experienced, 
move this product further away from the TV or VCR. This will often reduce or 
eliminate interference. Operating near 2.4 GHz electrical appliances may cause 
interference. Move away from the electrical appliances.
Environment
Do not place the product in a room where the temperature is less than 0 °C (+32 
°F) or greater than +40 °C (104 °F). Allow 10 cm (4 inches) clearance around the 
product for proper ventilation.
Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
Routine care
Wipe the product with a soft cloth. Do not use benzine, thinner, or any abrasive 
powder. When you leave the product unused for a long period of time, unplug the 
AC cord plug from the outlet.
If there is any trouble
Consult an authorized Panasonic Factory Service Center. 
						

							8
FCC RF Exposure Warning:
• To comply with FCC RF exposure requirements in uncontrolled environment:
• This equipment must be installed and operated in accordance with provided 
instructions and a minimum 20 cm (8 inches) spacing must be provided 
between antenna and all person's body (excluding extremities of hands, wrist 
and feet) during wireless modes of operation.
• This transmitter must not be co-located or operated in conjunction with any 
other antenna or transmitter.
Medical
Consult the manufacturer of any personal medical devices, such as pacemakers, 
to determine if they are adequately shielded from external RF (radio frequency) 
energy. (The product operates in the frequency range of 2400 MHz to 2483.5 MHz, 
and the power output level is 0.1 watts.) Do not use the product in health care 
facilities if any regulations posted in the area instruct you not to do so. Hospitals or 
health care facilities may be using equipment that could be sensitive to external RF 
(radio frequency) energy.
Other
Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user's authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation.
No responsibility will be taken by our company with respect to consequences 
resulting from the use and/or the damage of this product. 
						

							[For assistance, please call: 1-800-272-7033] 9
Ta b l e  o f  C o n t e n t s
1 Names and Locations................................................. 12
1.1 Main Unit ......................................................................................12
1.2 Remote Control ............................................................................15
2 Connecting Cameras .................................................. 20
2.1 Local and Remote Cameras .........................................................22
2.2 Connecting Cameras Directly to the BL-WV10A ..........................23
2.2.1 Connection Overview ...............................................................................23
2.2.2 Television Connection...............................................................................23
2.2.3 Quick Setup ..............................................................................................26
2.2.4 Confirming the Camera Image .................................................................28
2.2.5 Placing Cameras ......................................................................................30
2.3 Connecting Cameras Using an Optional BB-HGW700A ..............31
2.3.1 Connection Overview ...............................................................................31
2.3.2 Television and BB-HGW700A Connection ...............................................32
2.3.3 Setting the User Name and Password......................................................34
2.3.4 Quick Setup ..............................................................................................35
2.3.5 Confirming the Camera Image .................................................................38
2.3.6 Placing the BB-HGW700A and the Cameras ...........................................41
2.4 Connecting Cameras Using a Router ...........................................42
2.4.1 Connection Overview ...............................................................................42
2.4.2 Television and Router Connection ............................................................42
2.4.3 Setting the Camera’s IP Address..............................................................44
2.4.4 Setting the User Name and Password......................................................45
2.4.5 Quick Setup ..............................................................................................47
2.4.6 Confirming the Camera Image .................................................................50
2.4.7 Placing the Router and the Cameras .......................................................52
2.5 Re-registering a Remote Camera as a Local Camera .................53
3 Viewing Camera Images ............................................. 54
3.1 Displaying the Menu Screen .........................................................56
3.2 Panning/Tilting ..............................................................................57
3.3 Home Position/Sensor Position/Preset Keys ................................59
3.4 Choosing a Camera from the Camera List ...................................63
3.5 Displaying the Multi-Camera Screen ............................................64
3.6 Sensor Alert Mode........................................................................66