Panasonic Mpeg2 Encoder Wj Gxe900 Operating Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
MPEG2 Encoder
Model No.WJ-GXE900
MPEG2 Decoder
Model No.WJ-GXD900
Operating Instructions
LINK1
OPERATE100 1000ACTS
TATUS    1
        2        3       4         5        6        7         8
M
PEG2 Decoder 
WJ-GXD900900LINK1100
1000ACTS
TATUS    1
        2        3       4         5        6        7         8
M
PEG
2 Decoder 
WJ-GXD900900
OPERATE
STATUS    1           2...

2
The serial number of this product may be found on the
bottom of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No. WJ-GXE900/WJ-GXD900
Serial No.
Caution:
Before attempting to connect or operate this product,
please read the label on the bottom.
WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus...

3
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized...

CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ........................................................................\
...3
CONTENTS........................................................................\
................................................4
FEATURES ........................................................................\
............................................... .6
PRECAUTIONS ........................................................................\...

5
HOW TO USE THE CGI COMMANDS ............................................................................85
CAMERA CONTROL  .................................................................................................86
CAMERA SETTINGS MENUS CONTROL  ................................................................88
SWITCHING STREAMING VIDEO  ............................................................................90
CONTROLLING START / STOP OF THE ENCODER...

6
FEATURES
The MPEG2 Image Delivery System delivers image data as streaming data to a network such as a LAN. This system
consists of the encoder that converts an analog video signal (NTSC) to the digital data (MPEG2), and the decoder that
converts the digital data (MPEG2) to the analog video signal (NTSC).
•This system features the MPEG2 compression scheme. It is possible to send and receive motion pictures at 
30 fps, up to  9 Mbps.
•This system can be connected with a network that supports TCP/IP and...

7
PRECAUTIONS
Refer all work related to the installation of
these products to qualified service per-
sonnel or system installers.
Do not operate the appliances beyond
their specified temperature, humidity, or
power source ratings.
Use the appliance under conditions where
temperatures are between –10 °C and + 50 °C 
(14 °F to 122 °F),and humidity below 90 %.
The appliance may be not linked to a network after
turning on in a cold atmosphere between –10 °C and
0 °C (14 °F to 32 °F). Wait approximately 20...

8
PRECAUTIONS
SYSTEM REQUIREMENTS
Setting up and operating the encoder and the decoder with a web browser, and execution of the "Panasonic IP Setup"
software are possible with PCs meeting the system requirements described below.
OS Microsoft
®Windows®98 Second Edition
Microsoft®Windows®2000 Professional Service Pack 3
Microsoft®Windows®Millennium Edition
Microsoft®Windows®XP
Microsoft®Windows NT®Workstation 4.0 Service Pack 6a
Computer PC/AT Compatible
CPU Intel
®Pentium®II (300 MHz) or higher...

9
TRADEMARKS AND REGISTERED TRADEMARKS
•Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and/or other
countries.
•Intel and Pentium are trademarks of Intel Corporation.
•Ethernet is a registered trademark of Xerox Corporation.
•Adobe, Adobe logos, and Acrobat are registered trademarks of Adobe Systems Incorporated in the U.S. and/ or
other countries.
•Dolby Digital is a registered trademark of Dolby Laboratories.
•Other names of companies and products...

10
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
qPower Indicator (OPERATE)
This indicator lights up when the power of the
encoder is on.
When the temperature inside the encoder becomes
remarkably high, this indicator will start blinking.
It will take around 2 minutes and  45 seconds to start
up the encoder after turning the power on.
During start up, the STATUS indicators (STATUS 1 -
5) will light up in order. When the STATUS 5
indicator lights up, it is possible to operate the
encoder.
Each STATUS...