Panasonic Network Camera BB HCM403A Users Guide

							Important Information
Network Camera
Model No. BB-HCM403A (PoE Ready)
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed 
to reduce the risk of fire, electric shock, or personal injury.
1.Read and understand all instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Attach the Safety Wire to the camera to prevent it from dropping.
6. After taking away the sand or the dust on the lens cover, wipe the lens 
cover with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the 
manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, 
stoves, or other devices (including amplifiers) that produce heat.
9. [When using the AC Adaptor (Model No. BB-HCA2A: Option)] Protect 
the AC adaptor cord and AC cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the point where 
they exit from the unit.
10. [When using the AC Adaptor (Model No. BB-HCA2A: Option)] When 
you operate the camera, the power outlet should be near the camera 
and easily accessible.
11 . Only use attachments/accessories such as stand specified by the 
manufacturer.
12. Do not touch the unit, Ethernet cable, AC adaptor (Option), AC 
adaptor cord (Option) and AC cord (Option) during lightning storms.
13.Unplug the unit from power supply when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required 
when the unit has been damaged in any way, such as the AC adaptor 
(Option), AC cord (Option) or plug (Option) is damaged, the unit does 
not operate normally, or has been dropped.
15. Prolonged exposure to direct sunlight or halogen light may damage 
CCD sensor.
16. The camera is intended for indoor ceiling use only.
17. Keep the SD memory card (customer-provided) out of reach of 
children to prevent swallowing.
18. Unplug this unit from power supply if it emits smoke, an abnormal 
smell or makes unusual noise. These conditions can cause fire or 
electric shock. Confirm that smoke has stopped and contact an 
authorized service center.
SAVE THESE INSTRUCTIONS
Please read this manual before using, and save this manual for future 
reference.
Panasonic Network Camera Website:
http://www.panasonic.com/netcam
How to Use This Documentation
The Network Camera includes the following 5 manual types. 
• Important Information (This manual) This manual has general information and safety instructions you will 
need to understand before installing.
• Getting Started
Getting Started explains the initia l configuration of the Network 
Camera, to help you to set up the Network Camera quickly and easily.
• Installation Guide (For Professional Installers) Installation Guide explains mounting methods of the Network Camera.
• Operating Instructions (Included on the Setup CD-ROM) Operating Instructions explains the operations, settings, features and 
maintenance of the Network Camera.
• Troubleshooting (Included on the Setup CD-ROM) Troubleshooting provides troubleshooting help.
Trademarks
• Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
• Pentium is a trademark or registered trademark of Intel Corporation or its  subsidiaries in the United States and other countries.
• All other trademarks identified herein are the property of their respective  owners.
Abbreviations
• Network Camera is called Camera in this manual.
• Setup CD-ROM is called CD-ROM in this manual.
FCC and Other Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC  Rules. These limits are 
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,  uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio co mmunications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm ful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the  interference by one or 
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interf erence that may cause 
undesired operation.
Environment:
Do not install the camera where the temperature is less than 0  °C (+32  °F) or greater than +40  °C (+104  °F). Allow 10 cm (3 15/16 inches) clearance 
around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
Routine care:
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.
When you leave the unit unused for a long period of time, disconnect the plug of the AC cord from the outlet (when using the AC  adaptor) or disconnect 
the Ethernet cable from the unit (when using PoE).
If you have any problems:
Consult an authorized Panasonic Factory Service Center.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to  operate this device.
CR Coin Cell Lithium Battery Information:
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Audio and Video Recording Notice
PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by law. This device should be used only i n compliance with 
all applicable laws and statutes.  No responsibility will be taken by our company with respect to consequences resulting from the use, damage or both of the camer
a.
© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX15556ZA  KK0606JT0
Indoor Ceiling Use Only• Installation and wiring should be performed by a professional installer. 
						

							System Requirements for your PC
Your PC (Personal Computer) and network must meet the following 
technical specifications for the camera to work properly.
For IPv4 Connection
For IPv6 Connection
Note
• A PoE hub is required when using the PoE.
• See Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/  for details about 
network environment.
What is IPv6?
• IPv6 is short for Internet Protocol Version 6.
• IPv6 was created to provide the additional IP addresses that will be  needed as the Internet continues to expand.
• IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a  number of years during a transition period.
• Though most ISPs (Internet Service Providers) do not yet support IPv6,  many local networks already use it. When your ISP supports IPv6, your 
Panasonic Network Camera will be ready!
• For more information, visit  http://www.ipv6.org/.
Item Description
Operating System Microsoft
® Windows® XP, Microsoft® Windows® 2000 
Microsoft® Windows® Me, Microsoft® Windows® 98SE
CPU • For viewing single camera
Pentium
® III (800 MHz or greater is recommended.)
• For viewing multiple cameras Pentium
® 4 (1.8 GHz or greater is recommended.)
Protocol TCP/IP protocol
(HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
Interface 10/100 Mbps network card installed
Web Browser Internet Explorer 6.0 or later 
(Not included on the CD-ROM)
Audio User-supplied microphone and speaker (required to use 
the Talk and Listen features)
Item Description
Operating System Microsoft
® Windows® XP Service Pack 1 or later
CPU • For viewing single camera
Pentium
® III (800 MHz or greater is recommended.)
• For viewing multiple cameras Pentium
® 4 (1.8 GHz or greater is recommended.)
Protocol TCP/IP protocol 
(HTTP, TCP, UDP, IP, DNS, ICMPv6, NDP)
Interface 10/100 Mbps network card installed
Web Browser Internet Explorer 6.0 or later 
(Not included on the CD-ROM)
Audio User-supplied microphone and speaker (required to use 
the Talk and Listen features)
Security Cautions
When using this product, take appropriate measures to avoid the following 
security breaches.
• Leaks of private information via this product
• Illegal use of this product by a third party
• Interference or suspension of the use of this product by a third party
Take the following measures to avoid security breaches:
• To prevent illegal access, keep the firmware up to date 
(If you do not have the latest version of firmware, this can lead to 
blocked access or information leaks).
• You are responsible for the security settings, such as user name and  password, to access this product. This information should not be made 
available to any third parties outside the user group.
• Mount the camera where the camera will not be stolen.
• You are responsible for this products user information, such as videos, 
still images, Internet content, etc. This information should not be made 
available to any third parties outside the user group.
• When sending this product to be repaired with a company not related to  Panasonic, make back-up copies of files, if necessary, and reset this 
product to factory default.
• When transferring this product to another party, make back-up copies of 
files, if necessary, and reset this product to factory default.
• Recorded files stored on the SD memory card can lead to private  information leaks. When sending this product to be repaired or 
transferring it to another party, ensure that the SD memory card is 
removed.
• When disposing of this product, reset this product to factory default, or 
erase information by means of electrical deletion or physical 
dismantlement.
User Name and Password Protection
The use of a unique User Name and secret Password is an important 
tool that will help limit unauthorized individuals from accessing the 
camera. If you choose to disable this tool, and choose not to limit 
access by use of a User Name and Password, this may result in 
access to the camera by unauthorized individuals. (See page 75 of 
the Operating Instructions on the CD-ROM)
Included Items
The following items are provided with the camera.
Main Unit  . . . . . . . . . . . . . . . . 1 pc. Safety Wire . . . . . . . . . . . . . . 1 pc.
Order No.: PQME10080Z
Wire Length: About 30 cm (1 feet)
Ceiling Mounting Cover  . . . . 1 pc.
Order No.: PQKL10085Z1 Ceiling Plate A
 . . . . . . . . . . . 1 pc.
Order No.: PQZMHCM403A
Ceiling Plate B . . . . . . . . . . . . 1 pc.
Order No.: PQMD10107Z Screws A
. . . . . . . . . . . . . . .  2 pcs.
Order No.:  XYN3+J6FJ
Screw B  . . . . . . . . . . . . . . . . . 1 pc.
Order No.: PQHV2610PJ65 Screws C
. . . . . . . . . . . . . . .  5 pcs.
Order No.:  XTB4+20AFJ
Washer (S) . . . . . . . . . . . . . . .  1pc.
Order No.: XWG26D12VW Washer (L)
. . . . . . . . . . . . . . . 1 pc.
Order No.: XWG4F16VW
Setup CD-ROM  . . . . . . . . . . .  1pc.
Order No.: PQQX15036XCD Important Information (This manual)
. . . . . . . . . . . . . . . . . . . . . . . .  1 pc.
Getting Started  . . . . . . . . . . .  1 pc.
Installation Guide . . . . . . . . .  1 pc.
The information in this document is subject to change without notice.
Panasonic Consumer Electronics Company, 
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infanter ía, Km. 9.5,
Carolina, Puerto Rico 00985
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal 
use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic 
Communications Co., Ltd.
For product service
• Panasonic Servicenters are listed in the servicenter directory.
• Call 1-800-272-7033 for the location of an authorized servicenter.
• This Network Camera is designed for use in t he United States of America. Sale or use 
of this product in other countri es/areas may violate local laws.
When you ship the product
• Carefully pack your unit, preferably in the original carton.
• Attach a letter, detailing the symptom, to the outside of the carton.
Symptom
• Send the unit to an authorized servicenter, prepaid and adequately insured.
• Do not send your unit to the Panasonic C onsumer Electronics Company listed below 
or to executive or regional sales offices.  These locations do not repair consumer 
products.
Option
When using the AC Adaptor, use only the specified Panasonic AC Adaptor 
and AC Cord shown below.
Model No.: BB-HCA2A
AC Adaptor  . . . . . . . . . . . . . . 1 pc.
Cord Length: About 3 m (9 feet 10 
inches) AC Cord
. . . . . . . . . . . . . . . . . 1 pc.
Cord Length: About 1.8 m (5 feet 11 
inches)