Panasonic Network Camera Recorder BB-HNP11A Operating Instructions

Operating Instructions
11
1.4 Looking at Installation Procedure
You must perform the following steps to use this software.
Read the End-User License Agreement (see page 8).
You cannot install this software if you disagree.
(The legal agreement is required when installing this software.)
Install this software (see page 12).
Perform the license registration (see page 21).
Perform the license registration to use this software. 
The attached registration code stickers are required to perform license...

Operating Instructions
12
1.5 Installing This Software
It is recommended that you create an administrator account user on your PC to 
securely manage recorded images. After logging in as the set user, install this 
software.
1.Insert the CD-ROM to the CD-ROM drive.
 Installation Selection window automatically appears.
Notes
 If Installation Selection window does not appear, open the CD-ROM 
and double-click autorun.exe file.
 Adobe
® Reader® must be installed on your PC. 
It can be downloaded  without...

Operating Instructions
13
Note
If you do not log in as an administrator account user, you cannot install this 
software and the following windows will be displayed. Log in as an 
administrator.
 Installation window appears.or 

Operating Instructions
14
3.Click [Next>].
 License Agreement window appears.
4.Check [I Agree] and click [Next>].
 Choose Destination Location window appears.
Notes
 To securely manage recorded images, selecting [Just me] is 
recommended.
 [Everyone] means users having an administrator account. 

Operating Instructions
15
 Click [Browse...] to change the destination folder.
 The destination must have more than 200 MB free capacity.
 If you click [Disk Cost...], installable drives, each drive disk size and free 
capacity are displayed.
5.Select the destination folder, and click [Next>].
 Installation Confirmation window is displayed. 

Operating Instructions
16
6.Click [Next>].
 This software starts installation.
 After the installation, Installation Complete window is displayed. 

Operating Instructions
17
7.Click [Close].
  is displayed on the desktop.
 After the restart,   is displayed on the system tray. 
   lights red during recording.
Notes
 If the operation window is started but   is displayed, this software 
is working. Timer recording is also working.
 To close this software, right-click   and select [Exit]. The button 
will be deleted from the system tray. 

Operating Instructions
18
1.5.1 Modifying or Deleting This Software
To modify or delete this software, follow the steps below.
1.Insert the CD-ROM to the CD-ROM drive.
 Installation Selection window automatically appears.
 If Installation Selection window does not appear, double-click setup.exe 
file on the CD-ROM.
2.Click [Install Network Camera].
 If this software have been installed, the following window is displayed.
3.Check [Repair Network Camera Recorder] or [Remove Network Camera 
Recorder],...

Operating Instructions
19
1.6 Starting or Closing This Software
1.6.1 Starting This Software
Double-click   on the desktop to start this software.
 Initial window of this software is displayed.
Notes
 These softwares cannot work at the same time. Use only a software.
 This software can be started from the program menus. Clicking ncr2.exe 
file at the destination also starts this software.
 If the license is not registered, the License Registration window is 
displayed. Register a license by following...

Operating Instructions
20
1.6.2 Closing This Software
Click [File] [Exit] on the menu bar.