Panasonic Network Camera Recorder Single Camera Version Operating Instructions

Operating Instructions
81
Search
Message Cause and Remedy
Parameter Error
A XXXX error has occurred in 
Preferences. Try again.
XXXX =
 Save Destination Folder
 Save Destination Free Disk 
Space
 Perform Automatic Backup
 Backup Folder
 Backup Destination Free Disk 
Space
 Backup Execution Time
 Backup Period
 Backup Day of the Week
 Backup Date
 Using a Proxy Server
 Proxy Server Address
 Proxy Server Address Port
 Proxy User Name
 Proxy Password This is a software error.
If same error...

Operating Instructions
82
Keyword Change
Message Cause and Remedy
Parameter Error
An error has occurred in the 
XXXX parameter in Search 
Recorded Image List. Try again.
XXXX =
 Camera ID
 Number of Search Results
 Search Start Number
 Search Topic
 Recording Status
 Recording Type
 Start Date and Time
 End Date and Time
 Day Specification
Keyword
 Folder Specification This is a software error.
If same error message appears after trying 
again, restart your PC. 
Message Cause and Remedy...

Operating Instructions
83
License Registration
Message Cause and Remedy
Parameter Error
An error has occurred in the 
XXXX parameter in Edit 
Keyword. Try again.
XXXX =
 Camera ID
 Recorded Image ID
 Recorded Image Save 
Destination
Keyword 1
Keyword 2 This is a software error.
If same error message appears after trying 
again, restart your PC.
Message Cause and Remedy
Enter Registration Code.  Registration Code space was blank.
Follow the instruction message.
Enter License Key.  License Key...

Operating Instructions
84
JPEG Conversion
Message Cause and Remedy
Start Time should be within the 
recording time. The start time is not within the recording time.
Follow the instruction message.
Set the Start Time so that it 
comes before the End Time. The start time comes after the end time.
Follow the instruction message.
Set the End Time to within the 
recording time. The end time is not within the recording time.
Follow the instruction message.
Conversion Interval should be 
between 1 and (the...

Operating Instructions
85
Other Errors
Message Cause and Remedy
Recording cannot be started 
because XXXX has reached its 
recording capacity. Delete 
unnecessary images in order to 
start recording.
XXXX =
 Camera Name The capacity has reached the recording 
capacity limit.
Delete unnecessary images, or change 
the settings of recording capacity limit.
Recording cannot be started 
because XXXX has disabled the 
camera. Enable the camera in 
order to start recording.
XXXX =
 Camera Name The camera is...

Operating Instructions
86
Camera could not be 
authenticated. Check the User 
Name and Password and try 
again. This software do not pass the camera 
authentication.
Follow the instruction message.
The specified camera does not 
support audio. Change the 
recording settings to image only. The camera is not supporting audio, but the 
image setting is set to audio and image.
Follow the instruction message.
There is insufficient free space on 
the Save Destination Disk. Delete 
unnecessary recorded images...

Operating Instructions
87
There were timers that could not 
be deleted. Try again. This software is malfunctioning. (This 
message is not normally displayed.)
Restart your PC.
Is it OK to apply the proxy settings 
to all cameras? You checked [Use a proxy server] on the 
network page of the preferences. (The camera 
should be registered.)
Follow the instruction message.
All cameras have been set to use 
proxy settings. You clicked [Yes] in the Is it OK to apply the 
proxy settings to all of the...

Operating Instructions
88
The registration information was 
incorrect. Check the registration 
code and license key and try 
again. The registration information was incorrect.
Check the registration code and license 
key and try again.
To use this feature, license 
registration is essential. Perform 
license registration. Some features cannot be used without license 
registration (JPEG Conversion).
Perform license registration.
The file could not be found.  The Operating Instructions file is not in...

Operating Instructions
89
Network Drive could not be 
specified in the Import File. 
Specify a local drive. Network drives or folders on the network could 
not be specified to create an export file.
Specify a local drive.
Network Drive could not be 
specified in the Export File. 
Specify a local drive. Network drives or folders on the network could 
not be specified to create an export file.
Specify a local drive.
Save Destination Free Disk 
Space should be less than the 
current free space (XXX MB)....

Operating Instructions
90
There is only XX MB of free space 
remaining in Save Destination 
Folder Disk. Either increase the 
free space to over 100 MB or 
select a disk with over 100 MB of 
free space. The save destination free space is less than 
100 MB.
Follow the instruction message
There is only XX MB of free space 
remaining in Backup Folder Disk. 
Either increase the free space to 
over 100 MB or select a disk with 
over 100 MB of free space. The backup destination free space is less than 
100...