Home > Panasonic > Recorder > Panasonic Network Camera Recorder Single Camera Version Operating Instructions

Panasonic Network Camera Recorder Single Camera Version Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Network Camera Recorder Single Camera Version Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Operating Instructions
    31
    Basic Settings Page
    Setting Description
    Camera Name Enter the camera name (mandatory). The camera name is 
    displayed on the screen (see page 45).
     Maximum 250 characters.
    Comment Enter the information of the camera such as a location. The 
    comment is displayed on the screen (see page 45).
     Maximum 128 characters.
    Camera Address Enter the IP address (or domain name) (mandatory).
     Enter the alphanumeric characters.
    Port Enter the port number.
     When port number is 80 (default), you do not need to enter 
    port number.
     Enter the numeric characters. 
    						
    							Operating Instructions
    32
    Note
    If this software cannot access the camera, the following message is displayed. 
    Confirm the camera setting and try again.
    Note
    The number of connections from software to the camera is limited. 
    Up to 3 connections can be established with the camera. User Name/
    PasswordIf you set security setting (authentication setting), enter 
    administrator user name and password of the camera.
     Enter the alphanumeric characters.
     4 to 15 characters.
     Password is saved in encryption.
    Use a proxy server If you enable the proxy settings (see page 28), [Use a proxy 
    server] is enabled. If the camera is using a proxy server, check 
    [Use a proxy server]. Setting Description 
    						
    							Operating Instructions
    33
    Image Settings Page
     Default is displayed when you register a camera.
     If you can change default by checking [Set to Default] and clicking [OK], the 
    current settings become as a default.
     If you click [Return to Default], the settings return to a default.
    Note
    If the camera disables setting changes, resolution or image quality settings 
    may not work properly. Setting Description
    Resolution Select 640 x 480, 320 x 240 (default) or 160 x 120.
    Image Quality Select Favor Clarity, Standard (default) or Favor Motion.
    Recorded 
    FrequencySet the interval to record images.
    [Not Specify
    *1, Specify*2 or Setting Intervals*3]
    *1If you record images as they are set on the camera, set to [Not Specify]. Images are recorded 
    as the camera sends images through its max. bandwidth.
    *2If you select [Audio and Image], you cannot specify the intervals.*3Due to the network environment, you may not monitor the camera at the set intervals or max. 
    bandwidth.
    Recording Setting Select to record the image with audio or only images. 
    						
    							Operating Instructions
    34
    Recording Capacity Limit Page
     Default is displayed when you register a camera.
     If you change default by checking [Set to Default] and clicking [OK], the current 
    settings become as a default.
     If you click [Return to Default], the settings return to a default.
     If you change the capacity to a smaller value than the current capacity, this 
    software deletes old images. (E.g. if you change the capacity to 200 MB when 
    you recorded images up to 250 MB, 50 MB old images are deleted.) Setting Description
    Limit Recording 
    CapacityTo limit the capacity, check [Limit the recording capacity] and 
    set the capacity. Select [Stop recording] or [Delete old images 
    and keep recording] (by 1 minute) when the capacity is full. 
    						
    							Operating Instructions
    35
    Motion Detection Page
    E.g. If the recording time overlaps other settings, a continuous image is recorded.
     If you set to record images before or after 5-second period and another motion 
    is detected, 1 image is recorded.
     Default is displayed when you register a camera.
     If you can change default by checking [Set to Default] and clicking [OK], the 
    current settings become as a default.
     If you click [Return to Default], the settings return to a default.Setting Description
    Recording Method Record images in the time period before or after motion 
    detection.
    Threshold Adjust the threshold to start recording. If the threshold is set 
    low, this software sensitively detects changes.
    Sensitivity If you set sensitivity high, amplitude of motion detection bar 
    gets jumpy (see page 45).
    5 seconds5 seconds
    5 seconds5 seconds
    Motion is detected.
    Motion is detected. 
    						
    							Operating Instructions
    36
    Notes
     Clicking   on the toolbar buttons starts recording, and clicking   stops 
    recording. If you are clicking   or   while you set recording time period 
    before or after the motion detection, motion detection recording does not 
    work.
     If you try to capture a exact image when the motion is detected, do not 
    check the boxes of before motion detection and after motion detection.
     Motion detection level is changed depending on resolution, image quality, 
    object situation and network environment. Confirm the level by performing 
    motion detection recording.
    On the monitoring page, clicking   displays motion detection bar.
    Motion Detection Bar
    The threshold is the border between green and red. If the 
    level exceeds the threshold, the motion detection 
    recording starts.
    Indicator lights red during motion detection recording. 
    						
    							Operating Instructions
    37
    Keyword Page
    Setting Description
    Keyword 1/
    Keyword 2Put a keyword to manually-recorded images.
     2 keywords (keyword 1/keyword 2) can be set.
     If you set a keyword, you can search recorded images by 
    it (see page 63). 
    						
    							Operating Instructions
    38
    2.4.2 Editing Camera Information
    1.Select [Camera] [Edit Current Camera] on the menu bar.
     You can change camera information on the menu displayed by right-
    clicking on the camera list (see page 66).
     The change camera information page is displayed.
    2.Set the parameters and click [OK].
     See page 31 to page 37 for details about parameters. 
    						
    							Operating Instructions
    39
    2.5 Network Camera Recorder Window
    Window Display
    The camera list and operation bar can be displayed on another window, or change 
    the layout.
    E.g. Displaying the operation bar on another window
    Page Selection tab
    Monitoring Image: Displays the current image (see page 45).
    Recorded Image: Displays the recorded image list and playback image (see page 
    46).
    Timer List: Displays the timer list (see page 47).
    Camera List
    (see page 66)Menu Bar
    (see page 42)
    Toolbar Buttons
    (see page 44)
    Operation Bar
    (see page 49)
    Status Bar Monitoring Page (see page 45)
    Displays the status.
    Double-clicking                   or clicking       displays 
    it on another window. 
    						
    							Operating Instructions
    40
    E.g. Changing the layout moving the operation bar
    Note
    If you move the window while pressing [Ctrl] on the keyboard, the window is 
    located as an independent window.
    You can move the location by dragging.
    The window is embedded by dragging on the page. 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Network Camera Recorder Single Camera Version Operating Instructions