Home
>
Panasonic
>
Security system
>
Panasonic Network Camera Server BB HCS301A Geting Started Manual
Panasonic Network Camera Server BB HCS301A Geting Started Manual
View the Panasonic Network Camera Server BB HCS301A Geting Started Manual for free. All the Panasonic manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 1
2005 Panasonic Communications Co., Ltd. All Rights Reserved.
PSQX3859ZB KK0605YT2056
Getting Started
Network Camera Server
Model No.BB-HCS301A
•Please read the Installation manual before using.
This Getting Started explains how to connect and set up this product.
See the Operating Instructions on the Setup CD-ROM for details about
the features.
If you cannot complete the setup, see the Troubleshooting manual on the \
Setup CD-ROM.
2.Connect this product to your router, and turn this product on....](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-0.png "Page 1
2005 Panasonic Communications Co., Ltd. All Rights Reserved.
PSQX3859ZB KK0605YT2056
Getting Started
Network Camera Server
Model No.BB-HCS301A
•Please read the Installation manual before using.
This Getting Started explains how to connect and set up this product.
See the Operating Instructions on the Setup CD-ROM for details about
the features.
If you cannot complete the setup, see the Troubleshooting manual on the \
Setup CD-ROM.
2.Connect this product to your router, and turn this product on....")
![Page 2
•Some cameras may display black
lines at the end on the image due to
the gap of the display area. Adjust
the picture position (see page 67 of
the Operating Instructions on the
Setup CD-ROM).
To ensure that the most current
image is displayed, Internet Explorer
should be configured as follows. This
will not have a negative effect on
normal use.
1. While viewing any website, click [Tools] [Internet Options].
2. In the section Temporary Internet Files, click [Settings] and check
[Every...](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-1.png "Page 2
•Some cameras may display black
lines at the end on the image due to
the gap of the display area. Adjust
the picture position (see page 67 of
the Operating Instructions on the
Setup CD-ROM).
To ensure that the most current
image is displayed, Internet Explorer
should be configured as follows. This
will not have a negative effect on
normal use.
1. While viewing any website, click [Tools] [Internet Options].
2. In the section Temporary Internet Files, click [Settings] and check
[Every...")
![Page 3
When using a router supporting UPnPTM, check [Enable]. When
using a router not supporting UPnPTM, check [Disable]. Then
click [Next>]. Enter the user name and password that were set, and click [OK].
Click [Automatic Setup (Internet Access)].
•Check if your router supports UPnPTM referring to the routers manual.
If UPnPTM is not supported, the router has to be manually configured
for port forwarding. Refer to the routers manual for instruction on
how to do it.
If you select [Disable], skip to step...](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-2.png "Page 3
When using a router supporting UPnPTM, check [Enable]. When
using a router not supporting UPnPTM, check [Disable]. Then
click [Next>]. Enter the user name and password that were set, and click [OK].
Click [Automatic Setup (Internet Access)].
•Check if your router supports UPnPTM referring to the routers manual.
If UPnPTM is not supported, the router has to be manually configured
for port forwarding. Refer to the routers manual for instruction on
how to do it.
If you select [Disable], skip to step...")
![Page 4
Security Warning window on Microsoft Windows XP Service Pack 2
To view a video (Motion JPEG) or to listen to audio feature, ActiveX C\
ontrols must be installed.
Follow the steps shown below to install ActiveX Controls.
Click the warning displayed above the tabs, and click [Install
ActiveX Control...].Click [Install].
Enter this products MAC address in the data field,
and click [Set up camera].
After about a minute, the Security: Administrator page is displayed.
Setting up this product Using the MAC...](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-3.png "Page 4
Security Warning window on Microsoft Windows XP Service Pack 2
To view a video (Motion JPEG) or to listen to audio feature, ActiveX C\
ontrols must be installed.
Follow the steps shown below to install ActiveX Controls.
Click the warning displayed above the tabs, and click [Install
ActiveX Control...].Click [Install].
Enter this products MAC address in the data field,
and click [Set up camera].
After about a minute, the Security: Administrator page is displayed.
Setting up this product Using the MAC...")