Panasonic Network Function Edition PT-LB20NTU / PT-LB30NTU Instruction Manual

							21
One shot mode
In this mode, a snapshot of the current computer screen is transmitted to the projector.
Check the status indication on the launcher to make
sure that transmission is possible (check that the
green lamp is lighted).1
Click [ ] on the launcher.2
Using Wireless Manager ME 2.0 (cont.)
Quitting multi live mode
Click [ ] on the launcher again.
Check the status indication on the launcher to make
sure that transmission is possible (check that the
green lamp is lighted).1
Click [ ] on the launcher.
The computer images are automatically sent to the empty windows on the 16-screen display.
2
16-screen index style
Enlarged display
• Use the [ ] buttons on the remote control to move the focus (yellow box) to
the image to be enlarged and press [ENTER] to expand that image to fill the display.
• Press [ENTER] again to return to the 16-screen style.
Toggle between
these with the
[ENTER] button.
Note:
While an enlarged image is displayed, the [ ] buttons on the remote control will function
in the same way as the computer’s Page Up and Page Down keys. This means that if you
run a computer application that supports the[ ]buttons, the presentation screen can be
changed using the remote control.
Now use the [ ] button to set the window of the application that you want to run to the
active status. (If you operate the launcher, you will set the launcher to the active status: as a
result, you will need to set the window of the required application to the active status again.)
Note:
Select the standard style before operating. (See page 18)
However, this mode cannot be used while any other computer connected over the
wireless network to the projector in use is transmitting a snapshot. 
						

							22
Using Wireless Manager ME 2.0 (cont.)
Moving picture transmission 
Displaying the moving picture transmission window
Notes:
•Select the standard style before operating. (See page 18)
However, this mode cannot be used while any other computer connected over the
wireless network to the projector in use is transmitting a snapshot. 
•The allowed formats are those accepted by Windows Media Player, including asf,
wmv, avi and mpeg.
•
Some frames may be lost or the audio may be disrupted in some computing environments.
•Moving picture transmission mode does not function with Windows 98SE or Windows Me.
Check the status indication on the launcher to make
sure that transmission is possible (check that the
green lamp is lighted).1
Click [ ] on the launcher.
The computer screen will blank out for a moment, and the window shown
below will then appear.
2
Play
The movie will be displayed by the projector.
It will not be displayed on the computer screen.StopPauseContinuous play/ON-OFF
Use this to set continuous play to ON or OFF.Exit moving picture transmission mode
The computer screen will blank out for a
moment, and the moving picture
transmission mode is exited.
Volume
This enables the level of the volume
supplied to the projector to be adjusted.
Seek Bar
This enables jumping to the desired
place during movie play.
Moving picture transmission window 
						

							23
Using Wireless Manager ME 2.0 (cont.)
Notes:
•Select the standard style before operating. (See page 18)
However, this mode cannot be used while any other computer connected over the
wireless network to the projector in use is transmitting a snapshot. 
•The greater the number of projectors, the slower the transmission.
•Up to 8 projectors can be connected.
•Multiple source projection mode operations can be performed only in the live
mode and one-shot mode. However, the sound cannot be output in these modes.
Multiple Source Projection Mode
Transmits to multiple selected projectors.
To do this from the launcher:
Click[ ]. The connection select window shown above now appears.
While holding down the Ctrl key, select the desired
projectors, and click [OK].
2
Change [Single] to [Multi-].1
Click [ ] on the launcher.
The projectors selected in Step 2 will begin displaying.
4
Check the status indication on the launcher to make
sure that transmission is possible (check that the
green lamp is lighted).3 
						

							24
Notes:
Selecting [High Definition] imposes the following limits on operation.
•In moving picture transmission, operations are performed in the normal mode.
•When a movie is playing in the live mode, it may not be displayed smoothly.
Click [ ] on the
launcher.
The window shown to the right
appears.
Pointer mode
You can change the shape of the pointer appearing on the projection screen in live
mode to one that can be used for presentation purposes [ ].
Click [ ] on the launcher.
Quitting pointer mode
Click [ ] on the launcher.
Options
You can make various settings related to Wireless Manager ME 2.0.
Select [Normal] or [High Definition].
Picture quality selection
Select the quality of the image transmitted from the computer to the projector.
Version information
The version information of Wireless Manager ME 2.0 is displayed when [ ] on the
options window is clicked.
Using Wireless Manager ME 2.0 (cont.) 
						

							25
Live mode settings
You can set the computer operation in live mode and multi live mode.
[Remove image when shutting down Live Mode]:
Check this box to clear the projection screen from the projector when live mode
ends. Normally the image when live mode ends remains projected.
[Disable Screen Saver]:
This disables the computer screen saver function while Wireless Manager ME 2.0
is operating. Check this box to disable screen saver operation during live mode.
[Display sender’s name in Multi Live Mode]:
The characters (max. 8) which have been entered are displayed at the upper right
of the transmitted screen. 
In the 4-screen and 16-screen index style modes, they are also displayed at the
bottom of each image. 
(Alphanumerics are not displayed when the check mark has been removed.)
[Produce audio along with video at live mode]:
You can set this when you want to output audio data from a computer while in live mode.
However, the sound in the moving picture transmission mode does not reflect this setting but
it is determined by the volume level which was adjusted on the moving picture transmission
window. (See page 22.) Sound cannot be output in the multi live mode.
Shortcut key settings
You can set shortcut key combinations that let you control the Wireless Manager ME
2.0 functions by computer keyboard operations.
[Live Mode]:
Shifts to full screen display.
[Multi Live Mode]:
Shifts to multi screen display.
[One Shot]:
Transmits the entire computer 
screen one time.
[Use “Pause” key to stop/continue Live Mode]:
Stops live mode and multi live mode.
[Use “PrintScreen” key to execute One Shot]:
Transmits the entire computer screen one time.
Note:
In live mode and multi live mode, the shortcut key switches the mode without
stopping live mode.
Click [Key setting].
Using Wireless Manager ME 2.0 (cont.) 
						

							26
Using Wireless Manager ME 2.0 (cont.)
Launcher size and automatic setting of destinations
You can set the launcher size and can perform automatic settings for a newly
connected projector.
Click [Other].
Launcher size setting
Click the [Large button] or the [Small button].
Automatic connection setting
•If the [Make an automatic connection] box is checked and a projector is registered as
a destination for automatic connection when Wireless Manager ME 2.0 is started,
connection is performed automatically.
•When [Setting] is clicked, projector(s) can be selected for automatic connections.
•Up to 5 projectors may be displayed in the order of most recent connection history.
However, projectors used in multiple source projection mode are ignored for this
ordering.
When it is desired to remove a projector from the display list, select it and press the
[DELETE] button. 
						

							27
Adding and deleting connections
Click [ADD] and enter the IP address
(including its periods) of the connection
to be added, and then click [REGISTER].
The newly registered connection is added to the
connection list in the window shown in step 1.
2
Click [Designate] at the
connection select window.
The window shown to the right appears.
1
Using Wireless Manager ME 2.0 (cont.)
When [Network] is set to [USER] at the connection select window, connections can be
added and deleted by the following operations.
Adding a connection
When a projector with the [ ] mark is selected, the window
shown to the right appears. Enter the password and click [OK].
(see page 31) 
Notes:
• 
Click [CANCEL] at the password entry window to return to launcher (See page 12).
• When an incorrect password is entered, an error message appears. Click [OK] to
return to the password entry window and enter the correct password again.
Operations when password entry is required for connection
Deleting a connection
Select the connection to be deleted at the window shown in step 1 and click [DELETE]. 
						

							28
Displaying the Network Menu
Perform the procedure below to display the network menu required when changing the
initial settings.
Press the [MENU] button on the projector.
The main menu appears.1
Select [NETWORK] with the [ ] buttons, then press
the [ENTER] button.
The network menu appears.
2
NETWORK
1
LB20NT
OFF
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
   SELECTRETRN
ENTER
MENU
KEYSTONE
PICTURE
POSITION
INDEX WINDOW
SHUTTER
VOLUME
LANGUAGE
OPTION
SECURITY
NETWORK
SELECT
ENTER EXIT
Concerning on-screen items which are not displayed:
Depending on the signals which are input to the projector, it may not be possible to
adjust some of the items and use some of the functions.
In the case of an item that cannot be adjusted or a function that cannot be used, the
corresponding on-screen item will not be displayed, and you will not be able to
execute it even when you press the [ENTER] button. 
						

							29
Other Applications (Changing the Initial Settings)
When making a wireless connection between a computer and the projector with
settings other than the default settings, make the following settings.
Changing the network number
Projector operations
Select [NETWORK] at the network menu and press the
[ENTER] button.
1
Select the number to be connected
with the [ ] buttons and press
the [ENTER] button.2
NETWORK
USER
ADJRETRN
ENTER
Computer operations
Perform steps 1 to 2 on page 12, then perform the following operation.
Select the network group from the network number
list.1
Notes:
• Network number [1] is connected in WEP-disabled Mode, and Networks [2-4] are
connected in WEP-enabled mode. AES encryption is used for image and audio
data for all networks to protect essential data.
• [USER] is used when the computer’s network settings are to be performed
manually for connection with the projector. (See pages 33 to 35) 
						

							30
Other Applications (Changing the Initial Settings)(cont.)
Changing the projector name
You can change the projector name on the network.
Select [NAME CHANGE] at the
network menu and press the
[ENTER] button.1
Enter the projector name using
the [ ] buttons.2
After entering the projector name,
select [OK] and press the [ENTER]
button.
To cancel the change, select [Cancel] and press
the [ENTER] button.
3
1
LB20NT
ON
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL 
STATUS
DEFAULT
   SELECTNETWORK
RETRN
ENTER
LB20NT NAME CHANGE
BS OK Cancel
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
0123456789