Panasonic Network Interface Unit Wj Nt314 Operating Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Network Interface Unit
Network Operating Instructions 
Model No.WJ-NT314
LINKRCV
SNDOPERATE
Network Interface Unit WJ-NT314 

2
CONTENTS
Preface ..................................................................................................................................... 3
About these operating instructions  ....................................................................................... 3
Trademarks and registered trademarks  ............................................................................... 3
Viewer Software...

3
Preface
About these operating instructions
There are 2 sets of operating instructions for the WJ-NT314 as follows.
• Operating Instructions (Book)
• Network operating instructions (PDF)
These operating instructions contain descriptions of how to operate this product using a PC via a network and of
how to configure the settings.
Refer to the operating instructions for descriptions of how to install this product and of how to connect to a network.
Adobe
®Reader®is required to read these operating...

4
Monitor Images on a PC
The following are descriptions of how to monitor images from the unit on a PC. 
Monitor images from a single camera
entries. The default user name and password are as
follows. 
User name: admin
Password: 12345
When accessing the unit without changing the
default password, the pop-up window saying that it
is recommended to change the password will be dis-
played. 
To enhance the security, change the password for
the user admin. It is recommended to change this
password...

5
About the Live page
q[Setup] button (*1)
Click this button to display the setup menu. The but-
ton will turn green and the setup menu will be dis-
played. 
w[Live] button
The button will turn green and the Live page will be
displayed.
e[1] to [4] buttons
Click this button to display the Live page. The but-
ton will turn green and the Live page will be dis-
played. It is possible to select a desired channel by
clicking the [1] to [4] buttons.
rMulti-screen buttons
Images from multiple cameras can be...

6
uB/W button (*2)
Click the desired button to switch color (colour) of
the displayed images between color (colour) and
B/W.
:Images will be displayed in B/W (black and
white).
:Images will be displayed in color (colour).
:Activates Auto 1 mode. (The camera
selects black and white mode if the picture
is dark, or color mode if the picture is
bright enough.) If the camera has only one
AUTO mode, click this button.
:Activates Auto 2 mode. (The camera
detects the light source type to prevent
malfunction....

7
!4Frame
Displays/hides the frame when a person is detected.
Refer to page 11 for further information.
!5Track
Displays/hides the track of motion made by the
detected person.
Refer to page 11 for further information.
!6Unit title
The unit title entered for Unit title on the [Basic] tab
will be displayed. (page 20)
!7Camera title
The camera title set for [Camera title] will be dis-
played. (page 20)
!8Alarm occurrence indication
button (*2)
This button will be displayed at an alarm occurrence,
and the...

Monitor images from multiple cameras
Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras can be displayed simul-
taneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can be
registered as a group and up to 4 groups (16 cameras) can be registered. (page 33)
Important:
• Select OFF for both the user authentication and the host authentication of the network device to be registered. 
• Only JPEG images can be displayed on...

9
Action at an Alarm Occurrence
The alarm action will be performed when the following alarm occur. 
Alarm type
Terminal alarm:When connecting an alarm device such as a sensor to the connector terminal (Alarm Input
No. 1 to 4) on the rear of the unit, the alarm action (unit action at an alarm occurrence) will be performed
when the connected alarm device is activated. Alarm action to be performed differs depending on the settings
configured on the [Alarm] tab. (page 41)
Camera site alarm:When a camera...

10
About the image recognition function
AVMD, which is one of the image recognition functions, are featured in this unit. 
It is possible to detect moving, abandoned, or removed objects in the shooting area by setting the detection program
in advance. (page 34)
When an abandoned or removed object is detected, the frame and track, are displayed on the live images. (page
12)
Auto track for the detected object is also possible using another analog camera. (page 41)
It is also possible to specify the...