Panasonic Network PT-F300 Operation Manual
Have a look at the manual Panasonic Network PT-F300 Operation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
36
Various projection methods (cont.)
Multi live mode has “4-screen multi style”, “4-screen index sty\
le” and “16-screen index style”.
How to operate
Press the [MULTI-LIVE] button of the remote control to change the style.
Multi Live Mode
• 4-screen index style (See page 38)
Display the indexes (small screens) of up to four computer screens, and
make one of these screens an enlarged display. You can also temporarily
switch over to a full screen display.
• 16-screen index style (
See page 40)...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-35.png "Page 36
36
Various projection methods (cont.)
Multi live mode has “4-screen multi style”, “4-screen index sty\
le” and “16-screen index style”.
How to operate
Press the [MULTI-LIVE] button of the remote control to change the style.
Multi Live Mode
• 4-screen index style (See page 38)
Display the indexes (small screens) of up to four computer screens, and
make one of these screens an enlarged display. You can also temporarily
switch over to a full screen display.
• 16-screen index style (
See page 40)...")
![Page 37
37
Various projection methods (cont.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window (small scr\
eens) is
displayed). (See page 36)
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\
ojection screen, the
screen will switch over to a full screen display.
1...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-36.png "Page 37
37
Various projection methods (cont.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window (small scr\
eens) is
displayed). (See page 36)
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\
ojection screen, the
screen will switch over to a full screen display.
1...")
![Page 38
38
Various projection methods (cont.)
When the projector is set to “4-screen index style”, connect up to\
4 computers to one projector, and then simultaneously display
the screens for the 4 computers on the index windows and also on a large\
screen.
(If the connection is completed, and input is via network.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button of the remote control to switch the projection screen...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-37.png "Page 38
38
Various projection methods (cont.)
When the projector is set to “4-screen index style”, connect up to\
4 computers to one projector, and then simultaneously display
the screens for the 4 computers on the index windows and also on a large\
screen.
(If the connection is completed, and input is via network.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button of the remote control to switch the projection screen...")
![Page 39
39
Quitting the 4-screen index style projection
Click [] on the launcher.
Various projection methods (cont.)
Enlarged display
• Use the [] buttons on the remote control to move the focus (yellow box) to the \
image to be
enlarged, and press the [ENTER] button. The image is enlarged and displayed at the top of the
projection screen.
• The image display will fill the entire screen if the [ENTER] button is pressed again.
• To return to the 4-screen index style, press the [ENTER] button again.
•...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-38.png "Page 39
39
Quitting the 4-screen index style projection
Click [] on the launcher.
Various projection methods (cont.)
Enlarged display
• Use the [] buttons on the remote control to move the focus (yellow box) to the \
image to be
enlarged, and press the [ENTER] button. The image is enlarged and displayed at the top of the
projection screen.
• The image display will fill the entire screen if the [ENTER] button is pressed again.
• To return to the 4-screen index style, press the [ENTER] button again.
•...")
![Page 40
40
Various projection methods (cont.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button of the remote control to switch the projection screen
to “16-screen index style”. (See page 36)1
Click [] on the launcher.
The computer images are automatically sent to the empty windows on the 1\
6-screen display.
Display position is not selectable.
3
Enlarged display
• Use the [▲▼] buttons on the remote control to move the...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-39.png "Page 40
40
Various projection methods (cont.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button of the remote control to switch the projection screen
to “16-screen index style”. (See page 36)1
Click [] on the launcher.
The computer images are automatically sent to the empty windows on the 1\
6-screen display.
Display position is not selectable.
3
Enlarged display
• Use the [▲▼] buttons on the remote control to move the...")
![Page 41
41
You can simultaneously project one computer’s screen on up to eight projectors.
Click [Select Access Port] in the launcher menu.
(When controlling multi-live in the search screen)3
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window is displaye\
d). (See
page 3
6)
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\
ojection screen, the
screen will switch over to a...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-40.png "Page 41
41
You can simultaneously project one computer’s screen on up to eight projectors.
Click [Select Access Port] in the launcher menu.
(When controlling multi-live in the search screen)3
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window is displaye\
d). (See
page 3
6)
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\
ojection screen, the
screen will switch over to a...")
![Page 42
42
Click [] on the launcher.
The same image is projected from all projectors selected in step 7.
9
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)8
• Projection is provided in multi-live mode for the projector having the same network number that is selected in PC.
• Among the selected projectors, if there is one to which other PC is transmitting data or of which the projection screen is not set
to full-screen, projection is provided for...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-41.png "Page 42
42
Click [] on the launcher.
The same image is projected from all projectors selected in step 7.
9
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)8
• Projection is provided in multi-live mode for the projector having the same network number that is selected in PC.
• Among the selected projectors, if there is one to which other PC is transmitting data or of which the projection screen is not set
to full-screen, projection is provided for...")
![Page 43
43
Various projection methods (cont.)
Multiple Source Multi Live Mode
Up to 4 computers are connected to the maximum of 8 projectors; each pro\
jector provides 4-screen multi-style view.
Click [Select Access Port] in the launcher menu.
(When controlling multi-live in the search screen)3
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window is displaye\
d). (See
page 3
6)
If you press the [MULTI-LIVE] button once...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-42.png "Page 43
43
Various projection methods (cont.)
Multiple Source Multi Live Mode
Up to 4 computers are connected to the maximum of 8 projectors; each pro\
jector provides 4-screen multi-style view.
Click [Select Access Port] in the launcher menu.
(When controlling multi-live in the search screen)3
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window is displaye\
d). (See
page 3
6)
If you press the [MULTI-LIVE] button once...")
![Page 44
44
Switching to a different position
Select and click a different projection position in step 11 above.
Enlarged display
If [Live Mode] – [All] are clicked in the launcher menu, projector sc\
reens temporarily change to full screen display. To return to
the original display, click [Live Mode] on the launcher and select original projection posit\
ions with each computer.
Secondary viewer function
If another computer switches to the enhanced view, your screen will disappear from the projection screen...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-43.png "Page 44
44
Switching to a different position
Select and click a different projection position in step 11 above.
Enlarged display
If [Live Mode] – [All] are clicked in the launcher menu, projector sc\
reens temporarily change to full screen display. To return to
the original display, click [Live Mode] on the launcher and select original projection posit\
ions with each computer.
Secondary viewer function
If another computer switches to the enhanced view, your screen will disappear from the projection screen...")
![Page 45
45
Useful Functions
By using the selective area window, you can specify the necessary information alone from the computer scre\
en, and display it
on the projection screen.
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)4
Click [Selective Area Transmission] in the launcher menu.
The range selection screen is displayed.2
Click [] on the launcher.
The picture in the selective area window is projected.5
With the left mouse button held down,...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-44.png "Page 45
45
Useful Functions
By using the selective area window, you can specify the necessary information alone from the computer scre\
en, and display it
on the projection screen.
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)4
Click [Selective Area Transmission] in the launcher menu.
The range selection screen is displayed.2
Click [] on the launcher.
The picture in the selective area window is projected.5
With the left mouse button held down,...")
![Page 46
46
Useful Functions (cont.)
You can set the computer screen and the projector screen to the multi-mon\
itor mode, and use the computer screen as the
primary monitor and the projector screen as the secondary monitor.
Click [Display Change] in the launcher menu.
The window shown to the right appears.2
Click [] on the launcher.
The PC’s secondary screen is projected to the projector.
5
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)4
Secondary...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-45.png "Page 46
46
Useful Functions (cont.)
You can set the computer screen and the projector screen to the multi-mon\
itor mode, and use the computer screen as the
primary monitor and the projector screen as the secondary monitor.
Click [Display Change] in the launcher menu.
The window shown to the right appears.2
Click [] on the launcher.
The PC’s secondary screen is projected to the projector.
5
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)4
Secondary...")
41 You can simultaneously project one computer’s screen on up to eight projectors. Click [Select Access Port] in the launcher menu. (When controlling multi-live in the search screen)3 Press the [MULTI-LIVE] button on the remote control to turn the projection screen into a full screen display (the status when no index window is displaye\ d). (See page 3 6) If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\ ojection screen, the screen will switch over to a full screen display. 1 Select the network number of the desired projectors. (See page 54) Projectors powered on in the chosen network group are listed. 6 Click [].5 Select the desired projectors, and click [Connect]. The selected projector is displayed with a blue-colored []. If click again, selected items are canceled. If click [Connect], the connection with the projectors is established. 7 Various projection methods (cont.) Multiple Source Live Mode Projection can be provided for the projector having the same network num\ ber of either “1” through ”4” or “USER1” through “USER3” PCSearch All SettingCurrent setting > - [Single] - [1-4/U] Select access port StandbyLive ModeStandbyLive ModeStandbyLive ModeName4567Name8901Proj4567Proj8901 Update CloseConnectConnectability AAAABBBProj8547 PCSearch All SettingCurrent setting > - [Single] - [1-4/U] Select access port StandbyLive ModeStandbyLive ModeStandbyLive Mode AAAABBBName4567Name8901 Proj8547Proj4567Proj8901 Update CloseConnectConnectability 0COG2TQL Current Click []. The launcher menu will appear.2 Click [1-4/U] from the setting menu. window – [1-4/U] is displayed. If the setting menu is not displayed, click [Setting ]. 4 Live ModeSelective Area TransmissionDisplay ChangeVirtual Remocon PointerAV MuteWEB controlSelect Access PortOption About Wireless Manager End Start/PauseStop
42 Click [] on the launcher. The same image is projected from all projectors selected in step 7. 9 Check the status indication on the launcher to make sure that transmissi\ on is possible (). (See page 33)8 • Projection is provided in multi-live mode for the projector having the same network number that is selected in PC. • Among the selected projectors, if there is one to which other PC is transmitting data or of which the projection screen is not set to full-screen, projection is provided for that one. • The greater the number of projectors, the slower the transmission. • Picture quality or other options can be set on the window by clicking [Option] in the launcher menu. ( See page 49) • Sound cannot be output in the multiple source live mode. • If the connection error occurs during projection, the message [“\ Live mode” is deactivated] will appear. Check the communication environment, then restart projection by clicking launcher \ buttons. • Set the [LIVE MODE CUT IN] of the unit to [ON] in advance to enable a different computer to interrupt and project images in live mode. (See page 59) Quitting multiple source live mode Click [] on the launcher again. Various projection methods (cont.)
43 Various projection methods (cont.) Multiple Source Multi Live Mode Up to 4 computers are connected to the maximum of 8 projectors; each pro\ jector provides 4-screen multi-style view. Click [Select Access Port] in the launcher menu. (When controlling multi-live in the search screen)3 Press the [MULTI-LIVE] button on the remote control to turn the projection screen into a full screen display (the status when no index window is displaye\ d). (See page 3 6) If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\ ojection screen, the screen will switch over to a full screen display. 1 Select the desired projectors, and click [Connect]. The selected projector is displayed with a blue-colored []. If click again, selected items are canceled. If click [Connect], the connection with the projectors is established. 7 Select the network number of the desired projectors. (See page 54) Projectors powered on in the chosen network group are listed. 6 Click [].5 Can be projected by projectors that have a network number of [1]-[4] or \ [USER1]-[USER3]. PCSearch All SettingCurrent setting > - [Single] - [1-4/U] Select access port StandbyLive ModeStandbyLive ModeStandbyLive ModeName4567Name8901Proj4567Proj8901 Update CloseConnectConnectability AAAABBBProj8547 PCSearch All SettingCurrent setting > - [Single] - [1-4/U] Select access port StandbyLive ModeStandbyLive ModeStandbyLive Mode AAAABBBName4567Name8901 Proj8547Proj4567Proj8901 Update CloseConnectConnectability Click []. The launcher menu will appear.2 Click [1-4/U] from the setting menu. window – [1-4/U] is displayed. If the setting menu is not displayed, click [Setting ]. 4 Live ModeSelective Area TransmissionDisplay ChangeVirtual Remocon PointerAV MuteWEB controlSelect Access PortOption About Wireless Manager End Start/PauseStop 0COG2TQL Current
44 Switching to a different position Select and click a different projection position in step 11 above. Enlarged display If [Live Mode] – [All] are clicked in the launcher menu, projector sc\ reens temporarily change to full screen display. To return to the original display, click [Live Mode] on the launcher and select original projection posit\ ions with each computer. Secondary viewer function If another computer switches to the enhanced view, your screen will disappear from the projection screen while your are using the secondary display transmission feature; however, it is displayed as a secondary viewer on computer screen. (See page 4 6) Quitting multiple source multi live mode Click [] on the launcher. • From the selected projectors, multiple projectors that have the same network number are projected in multi-live mode. • If LB20NT/30NT or a projector whose projection screen is not set to full screen display is included among the selected projectors, the launcher live mode [1]-[4] will be grayed out, preventin\ g the projector from being selected. • The greater the number of projectors, the slower the transmission. • In multiple source multi live mode even when the remote projector [MULTI-LIVE] button is pressed no operation will result. • Picture quality or other options can be set on the window by clicking [Option] in the launcher menu. ( See page 49) • If the connection error occurs during projection, the message [“Live mode” is deactivated] will appear. Check the communication environment, then restart projection by clicking launcher \ buttons. Various projection methods (cont.) Select and click the projection position.11 Click [] on the launcher. The computer image is transmitted to the selected quarter of the project\ ion screen.12 Check the status indication on the launcher to make sure that transmissi\ on is possible (). (See page 33)8 Click [Live Mode] in the launcher menu.10 Click []. The launcher menu will appear.9Live ModeSelective Area TransmissionDisplay ChangeVirtual Remocon PointerAV MuteWEB controlSelect Access PortOption About Wireless Manager End Start/PauseStop ALL
45 Useful Functions By using the selective area window, you can specify the necessary information alone from the computer scre\ en, and display it on the projection screen. Check the status indication on the launcher to make sure that transmissi\ on is possible (). (See page 33)4 Click [Selective Area Transmission] in the launcher menu. The range selection screen is displayed.2 Click [] on the launcher. The picture in the selective area window is projected.5 With the left mouse button held down, surround the area you want to send to the projector. Selective area window (green) appears on computer screen. You can perform operations in the selective area window with the same ope\ ration for moving or changing the window on the computer screen. • If clicking [ ], automatically determine the size of selected area and enclose it with\ a framework. • If clicking [ ], the selective area window changes to its default size. • If clicking [ ], the selective area transmission function ends. 3 Selective Area Transmission • The picture inside the selective area window is displayed as big as possible with keeping the original aspect ratio to be fit for the resolution of projection screen. • If you use Wireless Manager as a [Standard User] in the [Installation free set up] condition, the selective area transmission feature is not available. Quitting selective area transmission Click [Selective Area Transmission] on the launcher again, or click [] on the upper right of the selective area window. Click []. The launcher menu will appear.1 If you have drawn a straight line, a selective area window is displayed \ in the diagonal direction from your line. Live ModeSelective Area TransmissionDisplay ChangeVirtual Remocon PointerAV MuteWEB controlSelect Access PortOption About Wireless Manager End Start/PauseStop
46 Useful Functions (cont.) You can set the computer screen and the projector screen to the multi-mon\ itor mode, and use the computer screen as the primary monitor and the projector screen as the secondary monitor. Click [Display Change] in the launcher menu. The window shown to the right appears.2 Click [] on the launcher. The PC’s secondary screen is projected to the projector. 5 Check the status indication on the launcher to make sure that transmissi\ on is possible (). (See page 33)4 Secondary display transmission • Like the normal multi-monitor function, you can change the relative positions of the primary monitor (computer screen) and secondary monitor (projector screen) in the [Settings] tab in the [Screen Properties] window ([Start] →[Control Panel] → [Appearances and Themes] → [Screen]). • It is impossible to send images to the secondary monitor by the selective area transmission ( See page 45). • If the computer has been set to the multi-monitor mode, the monitor for the display switch-over function will be displayed as the third monitor in [Display Properties] of Windows. • Some moving image applications may not replay moving images, when they are transmitted as secondary display on Windows Vista. Quitting secondary display transmission Click [Primary] in step 2. If you are using secondary display transmission function and projecting \ a secondary monitor screen in multiple source multi live mode, once [Live Mode] – [All] i\ s pressed on one of the computers, the full screen display from the computer will override all t\ he rest, and it will no longer be possible to verify the secondary screens of the other computers on th\ e projector screen(s). In this case, the secondary screen that you were projecting will appear \ on your desktop as a secondary viewer in reduced form. Also, while using the secondary display transmission in the 4-screen ind\ ex style and the 16-screen index style, the secondary viewer appears. Secondary Viewer • You can perform operations on the secondary monitor while observing the secondary viewer on the computer screen, however an image will not appear on the projection screen(s) until the project\ ion screen(s) goes back to the original projection style. • When the projector screen(s) return to its original status, the contents of the secondary viewer are displayed on the projection screen(s), and the secondary viewer is closed as well. Click [Secondary].3 Click []. The launcher menu will appear.1Live ModeSelective Area TransmissionDisplay ChangeVirtual Remocon PointerAV MuteWEB controlSelect Access PortOption About Wireless Manager End Start/PauseStop Primarysecondary
47 Useful Functions (cont.) Blanks the screen for a moment. Click [AV mute] in the launcher menu. The image is turned off. Audio output also goes out. 2 Click [AV mute] in the launcher menu again. [AV mute] is disengaged.3 AV Mute function The AV mute Function is available only in live mode or multiple source live m\ ode. Pointer function You can change the shape of the Pointer appearing on the projection scree\ n in live mode or multiple source live mode to one that can be used for presentation purposes. Click [Pointer] in the launcher menu. Quitting Pointer function Click [Pointer] in the launcher menu again. Click []. The launcher menu will appear.1Live ModeSelective Area TransmissionDisplay ChangeVirtual Remocon PointerAV MuteWEB controlSelect Access PortOption About Wireless Manager End Start/PauseStop
48 List of connectable projectors/available functions in each projection method Useful Functions (cont.) When using PT-F300NT/PT-FW300NT/PT-LB80NT/PT-LW80NT/ PT-F200NT/PT-F100NT/PT-FW100NT/PT-LB51NT/TH-LB50NT/TH-LB55NT/TH-LB60NT Selective areatransmission SecondarydisplaytransmissionAV mutePointer When connected to one projector Live Mode Multi Live Mode×× When connected to multiple projectors Multiple Source Live Mode Multiple Source Multi Live Mode×× = Yes, = No • Sound can be output only in live mode. ( See page 49) • Sound is not output when multiple projectors are connected. When using TH-LB20NT/LB30NTSelective areatransmission SecondarydisplaytransmissionAV mutePointer When connected to one projector Live Mode× Multi Live Mode××× When connected to multiple projectors Multiple Source Live Mode× Multiple Source Multi Live Mode―――― Wireless Manager ME 5.5 can be used when connected to the following proj\ ectors. ProjectorEasy setupNetwork AdapterPJLinkTMWeb controlCommand controlS-MAP1-4/UPC searchWired LANWireless LAN PT-F300NT/PT-FW300NT PT-LB80NT/PT-LW80NT××× PT-F200NT/PT-F100NT/PT-FW100NT ×× PT-LB51NT×××× TH-LB50NT/TH-LB55NT/TH-LB60NT×××× TH-LB20NT/TH-LB30NT××××× Connectable projectors The displayed screen, name and operation vary depending on the type of p\ rojectors. For detailed setting, see the operation manual for your projector. List of available functions in each projection method = Yes, = No
49
You can make various settings related to Wireless Manager ME 5.5.
Setting options
Setting options
Click [Option] in the launcher menu.
The window shown to the right appears.2
Click the desired tab to be set.3
Click [OK].4
Resolution
Select the quality of the image transmitted from the computer to the pro\
jector.
Live Mode Settings
• [Remove Image when shutting down Live Mode.]
Set this if you want to make images on the projector cleared at the end of live mode.
• [Disable Screen Saver]
This disables the computer screen saver function while Wireless Manager ME 5.5 is operating. Check this box to disable
screen saver operation during live mode.
• [Display sender’s name in Multi Live Mode]
The characters (max. 8) which have been entered are displayed at the upper right of the transmitted screen.
In the 4-screen and 16-screen index style modes, they are also displayed at the bottom of each image.
(Alphanumerics are not displayed when the check mark has been removed.)
• [Produce audio along with video during Live Mode]
You can set this when you want to output audio data from a projector in live mode.
Also, volume setting operated from the launcher is different from the Windows’ volume setting, and it is effective only for
wireless connection. When finishing Wireless Manager ME 5.5, the Windows\
’ volume setting becomes active.
Sound can be output only in live mode.
• [Start Live Mode at the same time as connection]
Projection starts when the connection is made without having to click th\
e live button.
Transmission
In the initial settings, [Disable Screen Saver] is enabled. Please remem\
ber that the password protected screen saver is disabled
if you need to leave your computer.
Click [].
The launcher menu will appear.1Live ModeSelective Area TransmissionDisplay ChangeVirtual Remocon
PointerAV MuteWEB controlSelect Access PortOption
About Wireless Manager
End
Start/PauseStop
50 You can set shortcut key combinations that let you control the Wireless M\ anager ME 5.5 functions by computer keyboard operations. Key setting Select the mode or the function to be set for the shortcut key, and click it.1 Select one from [Ctrl], [Alt], and [Shift].2 Select one alphabet to be used with the key chosen in step 2.3 Click [Setting]. The shortcut key set in step 2 - 3 appears in the blank space. If click [Clear], the shortcut settings are canceled. 4 In live mode and multi live mode, the shortcut key switches the mode wit\ hout stopping live mode. [Use “Pause” key to stop/continue Live Mode]: Check this to run/st\ op live-mode/multi live-mode by pressing the Pause key. Setting options (cont.)