Panasonic Projector PT-LW321 Specifications
Have a look at the manual Panasonic Projector PT-LW321 Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 5
SPECFILE
DLP™Projector
5/12
PT-LW321
As of August 2013
SFD13M010-1
unit : mm (inch)
NOTE:
Illustrations show the projector
installed using optional ceiling mount
bracket ET-PKV100H and attachment
ET-PKL300B.
This illustration is not drawn to scale.
Caution:
All construction work should be done by a qualified technician.
When mounting to the ceiling, use the special mounting bracket. Furtherm\
ore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting...](http://img.usermanuals.tech/thumb/58/101594/w64_projector_spec_7941_d-4.png "Page 5
SPECFILE
DLP™Projector
5/12
PT-LW321
As of August 2013
SFD13M010-1
unit : mm (inch)
NOTE:
Illustrations show the projector
installed using optional ceiling mount
bracket ET-PKV100H and attachment
ET-PKL300B.
This illustration is not drawn to scale.
Caution:
All construction work should be done by a qualified technician.
When mounting to the ceiling, use the special mounting bracket. Furtherm\
ore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting...")
![Page 8
SPECFILE
DLP™Projector
8/12
PT-LW321
As of August 2013
SFD13M010-1
List of compatible signals
The signals that can be input to this projector are shown in the table be\
low.
Display mode Display
resolution
(dots)
1
Scanning frequency
H
(kHz) V
(Hz)Dot clock
frequency
(MHz) Format
720 × 480i
720 × 576i
720 × 480i
720 × 576i 720 × 483
720 × 576
1280 × 720
1920 × 1080i
1920 × 1080
640 × 480
800 × 600 15.7
15.6
15.7
15.7
15.6
15.6
31.5
31.3
45.0
37.5
33.8
28.1
27.0
67.5
56.3
31.5
35.0
37.5
37.9
43.3
35.1...](http://img.usermanuals.tech/thumb/58/101594/w64_projector_spec_7941_d-7.png "Page 8
SPECFILE
DLP™Projector
8/12
PT-LW321
As of August 2013
SFD13M010-1
List of compatible signals
The signals that can be input to this projector are shown in the table be\
low.
Display mode Display
resolution
(dots)
1
Scanning frequency
H
(kHz) V
(Hz)Dot clock
frequency
(MHz) Format
720 × 480i
720 × 576i
720 × 480i
720 × 576i 720 × 483
720 × 576
1280 × 720
1920 × 1080i
1920 × 1080
640 × 480
800 × 600 15.7
15.6
15.7
15.7
15.6
15.6
31.5
31.3
45.0
37.5
33.8
28.1
27.0
67.5
56.3
31.5
35.0
37.5
37.9
43.3
35.1...")
![Page 10
SPECFILE
DLP™Projector
10/12
PT-LW321
As of August 2013
SFD13M010-1
* STX and ETX are character chords. STX is 02 and ETX is 03 when expressed\
in hexadecimal.
Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent
in this order. Add parameters according to the details of control.
CAUTION
It may not be possible to send or receive commands for about 10 to 60 seconds when the lamp is first turned on. If this
occurs, wait for 60 seconds, then try...](http://img.usermanuals.tech/thumb/58/101594/w64_projector_spec_7941_d-9.png "Page 10
SPECFILE
DLP™Projector
10/12
PT-LW321
As of August 2013
SFD13M010-1
* STX and ETX are character chords. STX is 02 and ETX is 03 when expressed\
in hexadecimal.
Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent
in this order. Add parameters according to the details of control.
CAUTION
It may not be possible to send or receive commands for about 10 to 60 seconds when the lamp is first turned on. If this
occurs, wait for 60 seconds, then try...")
![Page 12
SPECFILE
DLP™Projector
12/12
PT-LW321
As of August 2013
SFD13M010-1
Notes on projector placement and operation
The projector uses a high-wattage lamp that becomes very hot during operation.\
Please observe the
following precautions.
1. Never place objects on top of the projector while it is operating.
2. Make sure there is the unobstructed space as shown below or more around the projector’s exhaust
openings. In addition to this space, also ensure that there is a sufficient work space for removing
and...](http://img.usermanuals.tech/thumb/58/101594/w64_projector_spec_7941_d-11.png "Page 12
SPECFILE
DLP™Projector
12/12
PT-LW321
As of August 2013
SFD13M010-1
Notes on projector placement and operation
The projector uses a high-wattage lamp that becomes very hot during operation.\
Please observe the
following precautions.
1. Never place objects on top of the projector while it is operating.
2. Make sure there is the unobstructed space as shown below or more around the projector’s exhaust
openings. In addition to this space, also ensure that there is a sufficient work space for removing
and...")
SPECFILE DLP™Projector 11/12 PT-LW321 As of August 2013 SFD13M010-1 Status request commands Command : Parameter Function Description Callback QPW QSH QIN QVX:RTMI0 Q$L Main power status AV mute function status Input signal status Projector run time Lamp run time Standby On Standby Off On HDMI Computer 1 Computer 2 Video 00000h –99999h 0000h –9999h 000 001 0 1 HD1 RG1 RG2 VID Q$S Lamp on status 0 1 2 3 p1p2p3p4p5 p1p2p3p4 QTM:0 Temperature status p0 = Internal temperature p1p2p3p4/p5p6p7p8 (*1) *1 p1p2p3p4: Celsius (°C), p5p6p7p8: Fahrenheit (°F) Command example To s et the AV m ute function o f f , send the command as shown below. OSH : 0 ETX Command STX StartParameter End NOTE: When sending commands without parameters, a colon (:) is not nec\ essary. NOTE: If a wrong command is received, the projector will send an ER401 or ER402 command to the computer. Lamp on control in progress Lamp on Lamp off control in progress
SPECFILE DLP™Projector 12/12 PT-LW321 As of August 2013 SFD13M010-1 Notes on projector placement and operation The projector uses a high-wattage lamp that becomes very hot during operation.\ Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is the unobstructed space as shown below or more around the projector’s exhaust openings. In addition to this space, also ensure that there is a sufficient work space for removing and installing the lamp, air filter and other parts. 3. Make sure that nothing blocks the projector’s air intake and exhaust openings. Also, install the pro- jector so that cool or hot air from other air conditioning equipment does not flow directly toward the projector’s air intake or exhaust openings. 4. Do not install the projector in an enclosed space. If it is necessary to install it in an enc\ losed space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the intake opening. This may cause the projector’s protective circuit to interrupt projector operation. Direction of air intake and exhaust 500 mm (19-11/16) or more 500 mm (19-11/16) or more 1000 mm (39-3/8) or more Intake Exhaust Operating the projector continuously 1. If the projector is to be operated continuously 22 hours or more, lamp replacement cycle duration becomes shorter. 2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods (one hour or less). Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. DLP and the DLP logo are trademarks of Texas Instruments. P HDMI, the HDMI logo and High-Definition Multimedia Interface are tradema\ rks or registered trademarks of HDMI Licensing LLC in the United States and other countries. JLink is a registered trademark, or a trademark application has been filed, in Japan, the U\ nited States, and other countries an d regions. All other trademarks are the property of their respective trademark owners.