Panasonic Projector PT-LX351 Specifications

1/11
Product Name : DLP™Projector
S
PECFILE
Product Number :  PT-
LX351
As of August 2013. Specifications and appearance are subject to change w\
ithout notice.
SFD13M012-1 

SPECFILE
DLP™Projector
2/11
PT-LX351
As of August 2013
SFD13M012-1
 
Main unit
Power supply
Power consumption
DLP™ chip Panel size
Display method
Pixels
Lens
Lamp
Screen size
Brightness*
3
Center-to-corner uniformity *3
Contrast *3
Resolution
RGB
YP
BPR(YCBCR)
Video
Optical axis shift
Keystone correction range
Installation
Terminals HDMI IN
COMPUTER 1/2 INR, G, B
Y,  P
B(CB), PR(CR)
VIDEO IN
MONITOR OUT
AUDIO 1 IN 
SERIAL IN 100 240 V AC, 50/60 Hz
305W (0.5 W when 
STANDBY MODE set to ECO*1, 6.0 W when...

SPECFILE
DLP™Projector
3/11
PT-LX351
As of August 2013
SFD13M012-1
Remote control unit
Power supply
Operation range *
7
Dimensions (W × H × D)
Weight
Supplied accessories
Optional accessories
Ceiling mount bracket 3  V  DC  (Lithium coin cell battery x 1)
Approx. 8 m (26 ft 3 in) when operated from directly in front of the sig-
nal receptor
40.6 x 86.5 x 7.2 mm (1-19/32 × 3-13/32 × 9/32 inches)
Approx. 23 g (0.8 oz) (including battery)
Power cord (× 1) (× 2 for PT-LX351EA)
Wireless remote control unit (×...

SPECFILE
DLP™Projector
4/11
PT-LX351
As of August 2013
SFD13M012-1
Dimensions
Terminals
1 HDMI input
2 Monitor output
3 Computer 1 input
4 Video input
5 Audio 2 input for VIDEO
6 Audio 1 input for COMPUTER
7 LAN connector
8 Serial input
9 Computer 2 input
10 Audio output
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
COMPUTER 1 IN
COMPUTER 2 INVIDEO IN
SERIAL IN
MONITOR OUT
LAN INAUDIO 1 INAUDIO 2 IN
VARIABLE
AUDIO OUT
288 (11-11/32) 73 (2-7/8)
144 (5-21/32)
220 (8-21/32)
233241...

SPECFILE
DLP™Projector
5/11
PT-LX351
As of August 2013
SFD13M012-1
unit : mm (inch)
NOTE:
Illustrations show the projector
installed using optional ceiling mount
bracket ET-PKV100H and attachment 
ET-PKL300B.
This illustration is not drawn to scale.
Caution:
 All construction work should be done by a qualified technician.
 When mounting to the ceiling, use the special mounting bracket. Furtherm\
ore, in order to prevent it from falling  down from the ceiling, use the supplied wire on the mounting...

SPECFILE
DLP™Projector
6/11
PT-LX351
As of August 2013
SFD13M012-1
 
Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.
Aspect ratio 4:3
minimum L (m) = (diagonal screen size in inches) × 0.03962
maximum L (m) = (diagonal screen size in inches) × 0.04369
0.76 m
1.02 m
1.27 m
1.52 m
1.78 m
2.03 m
2.29 m
2.54 m
3.05 m
3.81 m
5.08 m
6.35 m
7.62 m 1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
4.8
5.9
7.9
9.9
11.9 1.3
1.7
2.2
2.6...

SPECFILE
DLP™Projector
7/11
PT-LX351
As of August 2013
SFD13M012-1
List of compatible signals
The signals that can be input to this projector are shown in the table be\
low.
Display mode Display
resolution
(dots)
1
Scanning frequency
H
(kHz) V
(Hz)Dot clock
frequency
(MHz) Format
720 × 480i
720 × 576i
720 × 480i
720 × 576i 720 × 483
720 × 576
1280 × 720
1920 × 1080i
1920 × 1080
640 × 480
800 × 600 15.7
15.6
15.7
15.7
15.6
15.6
31.5
31.3
45.0
37.5
33.8
28.1
27.0
67.5
56.3
31.5
35.0
37.5
37.9
43.3
35.1...

SPECFILE
DLP™Projector
8/11
PT-LX351
As of August 2013
SFD13M012-1
Serial connector
The serial connector complies with RS-232C. To control the projector from a personal computer, com-
mands must be input through communication software, based on the format and satisfying the commu-
nication conditions shown below.
Communication conditions (factory setting) Pin assignments and signal names
6
15 9
D-sub 9-pin (female) Serial input
Description
NC
Send data
Receive data
NC
Ground
Signal name
–
TXD
RXD
–
GND...

SPECFILE
DLP™Projector
9/11
PT-LX351
As of August 2013
SFD13M012-1
* STX and ETX are character chords. STX is 02 and ETX is 03 when expressed\
 in hexadecimal.
Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent
in this order. Add parameters according to the details of control.
CAUTION
 It may not be possible to send or receive commands for about 10 to 60 seconds when the lamp is first turned on. If this
occurs, wait for 60 seconds, then try...

SPECFILE
DLP™Projector
10/11
PT-LX351
As of August 2013
SFD13M012-1
Status request commands
Command : Parameter Function Description
Callback
QPW
QSH
QIN
QVX:RTMI0
Q$L Main power status
AV mute function status
Input signal status
Projector run time
Lamp run time Standby
On
Standby
Off
On
HDMI
Computer 1
Computer 2
Video
00000h –99999h
0000h –9999h
000
001
0
1
HD1
RG1
RG2
VID
Q$S
Lamp on status 0
1
2
3
p1p2p3p4p5
p1p2p3p4
QTM:0 Temperature status p0 = Internal temperature  p1p2p3p4/p5p6p7p8
 
(*1)
*1...