Panasonic Projector PT-RQ13K Specifications

							For more information about Panasonic projectors, please visit :
Projector Global Website – 
panasonic.net/avc/projector
Facebook – 
www.facebook.com/panasonicprojector
Yo uTu b e  –  
www.youtube.com/user/PanasonicProjector
 
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without 
notice. Product availability differs depending on region and country. This product may be subject to export control 
regulations. DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. 
The projection distances and throw ratios given in this leaflet are for use only as guidelines. For more detailed 
information, please consult the dealer from whom you are purchasing the product. The PJLink trademark is an 
application trademark in Japan, the United States, and other countries and regions or registered trademarks. HDMI, 
the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing 
LLC in the United States and other countries. All other trademarks are the property of their respective trademark 
owners. Projection images simulated. 36 USC 220506 © 2015 Panasonic Corporation. All rights reserved.
All information included here is valid as of November 2015.
PT-RQ13KG1 Printed in Japan.
SpecificationsPower supply
Cabinet materials Installation Power consumption
DLP™ chip
Scanning 
frequency
Terminals
Dimensions (W × H × D) 
Operation noise*
2
Operating environmentSD-SDI: 
SMPTE ST 259 compliant, [ YC
BCRR 4:2:2 10-bit ] 480i, 576i
*1 Refresh rate varies depending on vertical scanning frequency.  *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.  *3 Optional 3G-SDI Terminal Board ( T Y-TBN03G ) is not compatible with this signal.  *4 Geometric Adjustment and 
Upgrade Kit functions are not supported with simultaneous video signal input.  *5 Only compatible with dot clock frequency of 27 MHz ( pixel repetition signal ).  *6 Optical axis shift is not supported on the E T-D75LE50.  *7 When using Frame Sync In / Out terminals, projector firmware must be updated 
to Version 2.0 or later (scheduled February 2016 ). Contact your sales representative for more information.  *8 Average value. May differ depending on the actual unit. *9 When operational mode is set to Normal, operating temperature is from 0 °C ( 32 °F ) to 45 °C (113 °F ), and operating temperature 
is from 0 °C ( 32 °F ) to 40 °C (104 °F ) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) above sea level. When operational mode is set to Eco or Long Life 1/2 / 3, operating temperature is from 0 °C ( 32 °F ) to 40 °C (104 °F ). When used with Smoke Cut Filter, operating 
temperature is from 0 °C ( 32 °F ) to 35 °C ( 95 °F ). Projector cannot be used in locations over 2,700 m ( 8,858 ft) with operational mode set to Eco or Long Life 1/2 / 3. When used with Smoke Cut Filter, the projector cannot be used in locations over 1,400 m (4,593 ft). Light source brightness may 
decrease depending on operating environment.  *10 Available worldwide except in the United States.Weight*
8
1,270 W ( 0.3 W with Standby Mode set to Eco, 4 W with Standby Mode set to Normal )
Normal Mode: 913 W, Eco Mode: 782 W, Long Life 1 Mode: 531–732 W, Long Life 2 Mode: 477–702 W, Long Life 3 Mode: 423 – 665 W ( Operating temperature: 25 °C, Altitude: 700 m, 
IEC62087: 2008 Broadcast Content, Image Mode: Dynamic, Dynamic Contrast Mode: 3 )
Lens
Optional (no lens included with this model )
Refresh rate
Light source
Laser diodes laser Class 1 ( Class 3R for US models )
Light source life*
2: 20,000 hours ( Normal Mode ) / 24,000 hours ( Eco Mode ). At this time the brightness will have decreased to approximately half of its original level.
Single link HD-SDI: 
SMPTE ST 292 compliant, [
YP
BPR 4:2:2 10-bit]
 720/60p, 720/50p, 1035/60i, 1080/60i, 1080/50i, 1080/25p, 1080/25sF, 1080/24p, 1080/24sF, 1080/30p, 1080/30sF 
SDI 1/ SDI 2 simultaneous input (x 2 speed )
*4: 1080 / 60p, 1080 / 50p (1st frame: SDI 1, 2nd frame: SDI 2 )
SDI 1/ SDI 2 / SDI 3 / SDI 4 simultaneous input (x 4 speed )
*4: 1080 / 60p, 1080 / 50p (1st frame: SDI 1, 2nd frame: SDI 2, 3rd frame: SDI 3, 4th frame: SDI 4 )
DIGITAL LINK: 
Video signal resolution: 480i*
5/576i*
5– 4096 x 2160, still image signal resolution: 640 x 400 –2560 x 1600 ( non-interlace ), dot clock: 25 MHz–297 MHz
Dual link HD-SDI : 
SMPTE ST 372 compliant, [ YP
BPR 4:2:2 10-bit]
  1080 / 50p, 1080 / 60p, [ RGB 4:4:4 12-bit /10-bit , YP
BPR 4:4:4 12-bit /10-bit ] 1080 / 60i, 1080 / 50i, 1080 /24p, 1080 /24sF, 
1080 /25p, 1080 /25sF, 1080 / 30p, 1080 / 30sF, 2048 x 1080 /24p, 2048 x 1080 /24sF, 2048 x 1080 /25p, 2048 x 1080 /25sF, 2048 x 1080 / 30p, 2048 x 1080 / 30sF, [ XYZ 4:4:4 12-bit*
3] 
2048 x 1080 /24p, 2048 x 1080 /24sF, 2048 x 1080 /25p, 2048 x 1080 /25sF, 2048 x 1080 / 30p, 2048 x 1080 / 30sF
Panel size
Display method
Pixels
46 dB
Operating temperature: 0 – 45 °C ( 32–113 °F )*
9, operating humidity: 10 – 80 % ( no condensation ) AC 100 –240 V, 50 / 60 Hz
DLP™ chip × 3, DLP™ projection system
SDI IN 1Quad link HD-SDI: 
[YPBPR  4:2:2 10-bit] 3840 x 2160 /24sF, 3840 x 2160 /24p, 3840 x 2160 /25sF, 3840 x 2160 /25p, 3840 x 2160 / 30sF, 3840 x 2160 / 30p, 4096 x 2160/24sF, 
4096 x 2160 /24p, 4096 x 2160 /25sF, 4096 x 2160 /25p, 4096 x 2160 / 30sF, 4096 x 2160 / 30p
Quad link 3G-SDI : 
SMPTE ST 425 compliant, [ YP
BPR  4:2:2 10-bit ] 3840 x 2160 / 60p, 3840 x 2160 / 50p, 4096 x 2160 / 60p, 4096 x 2160 / 50p, [ YP
BPR  4:2:2 12-bit, YP
BPR  4:4:4 
10 /12-bit, RGB 10 /12-bit ] 3840 x 2160 /24sF, 3840 x 2160 /24p, 3840 x 2160 /25sF, 3840 x 2160 /25p, 3840 x 2160 / 30sF, 3840 x 2160 / 30p, 4096 x 2160 /24sF, 4096 x 2160 /24p, 
4096 x 2160 /25sF, 4096 x 2160 /25p, 4096 x 2160 / 30sF, 4096 x 2160 / 30p 10,0 0 0 lm 49,152,000 (12,288,000 x 4 ) pixels with Quad Pixel Drive set to ON, 12,288,000 ( 2560 x 1600 x 3 ) pixels with Quad Pixel Drive set to OFF
Resolution
5120 x 3200 pixels ( Quad Pixel Drive: ON, RGB signal input ) 22.9 mm ( 0.9 inches ) diagonal (16 :10 aspect ratio )
240 Hz*
1
1.78 –25.4 m ( 70 –1,000 in ) with 16 :10 aspect ratio
3.05 –15.24 m ( 120 – 600 in ) with the E T-D75LE90, 16 :10 aspect ratio
BNC × 1: 3G / HD / SD-SDI input, Dual-link HD-SDI input ( LINK-A ), Dual-link 3D-SDI input ( LINK-1), Quad-link 3G / HD-SDI input ( LINK 1)
BNC × 1: 3G / HD / SD-SDI input, Dual-link HD-SDI input ( LINK-B ), Dual-link 3D-SDI input ( LINK-2 ), Quad-link 3G / HD-SDI input ( LINK 2)
Screen size (diagonal)
Contrast*
2
20,000 :1 ( Full On / Full Off, Dynamic Contrast Mode: 3 )
Center-to-corner uniformity*
2
90 %
Brightness*
2
Molded plastic Horizontal/vertical, free 360-degree installation
SDI IN 2 Keystone correction range
Keystone correction range with optional 
Upgrade Kit ET-UK20*
4
Vertical: ±40 ° (± 22 ° with E T-D75LE50, ±28 ° with E T-D75LE6, +5 ° with E T-D75LE90 ), horizontal: ±15 ° ( 0 ° with E T-D75LE90 )
Vertical: ±45 ° (± 40 ° with E T-D75LE10 /20, ±22 ° with E T-D75LE50, ±28 ° with E T-D75LE6, +5 ° with E T-D75LE90 ), horizontal: ±15 ° with E T-D75LE6 /10 / 50, ±20 ° with E T-D75LE20, 
±25 ° with E T-D75LE30, ±30 ° with E T-D75LE40, ±40 ° with E T-D75LE8,  0 ° with E T-D75LE90, Up to a total of ±30 ° during simultaneous horizontal and vertical correction. 
BNC × 1: 3G / HD / SD-SDI input, Dual-link HD-SDI input ( LINK-B ), Dual-link 3D-SDI input ( LINK-2 ), Quad-link 3G / HD-SDI input ( LINK 4)
SDI IN 4
BNC × 1: 3G / HD / SD-SDI input, Dual-link HD-SDI input ( LINK-A ), Dual-link 3D-SDI input ( LINK-1), Quad-link 3G / HD-SDI input ( LINK 3)
SDI IN 3 
BNC × 1: Frame-synchronizing timing signal
Frame Sync IN/OUT*
7
BNC × 1: Frame-synchronizing timing signal
Frame Sync OUT*
7
Approximately 49 kg (108 lbs.) ( optional lens not included )
SERIAL IN
D-sub 9-pin (female) × 1 for external control ( RS-232C compliant )
SERIAL OUT
D-sub 9-pin (male) × 1 for link control
REMOTE 1 IN
M3 × 1 for wired remote control
REMOTE 1 OUT
M3 × 1 for link control (for wired remote control )
REMOTE 2 IN
D-sub 9-pin (female) × 1 for external control (parallel)
DIGITAL LINK/LAN
RJ-45 × 1 for network, DIGITAL LINK connection ( HDBaseT ™ compliant ), 100Base-T X, compatible with Art-Net, PJLink™ ( class 1), Deep Color, HDCP 2.2
Expansion Slot
x 2 ( SLOT 1, SLOT 2 ) ( Compatible with optional Input Board / Terminal Board )
Applicable software
Supplied accessories
578 x 270 x 725 mm ( 22 
3/4 × 10 
5/8 × 28 
17/32 ) ( Not including legs or protruding parts)
578 x 323.5 x 740 mm ( 22 
3/4 × 12 
23/32 × 29 
1/8 ) ( Including legs at shortest position and protruding parts)
Optical 
axis shift*
6
Horizontal
 (from center of screen)
Vertical
 (from center of screen)± 59 % (± 56 % with E T-D75LE6, +74 % – + 84 % with E T-D75LE90 ) ( powered )
±29 % (±19 % with E T-D75LE6, -12 % – +16 % with E T-D75LE90 ) ( powered )
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro ( E T-UK 20 Upgrade Kit and ET-CUK10*
10 Auto Screen Adjustment Upgrade Kit)*
4
Power cord x 2, wireless /wired remote control unit, batteries ( R6 /A A type × 2 ), Lens drop-prevention screw, software CD-ROM ( Logo Transfer Software, Multi Monitoring & Control Software)
Model
PT-RQ13K
A Small Box of Big Ideas for Picture-Perfect 4K+
Lenses sold separately.
3-Chip DLP™ Projector
PT-RQ13K
Dual link 3G-SDI : 
SMPTE ST 425 compliant, [ YP
BPR 4:4:4 12-bit /10-bit ] 1080 / 50p, 1080 / 60p, 2048 x 1080 /48p, 2048 x 1080 / 50p, 2048 x 1080 / 60p, [ RGB 4:4:4 12-bit /10-bit] 
1080 / 50p, 1080 / 60p, 2048 x 1080 /48p, 2048 x 1080 / 50p, 2048 x 1080 / 60p, [ YP
BPR 4:2:2 10-bit ] 3840 x 2160 /24p, 3840 x 2160 /25p, 3840 x 2160 / 30p, 4096 x 2160 /24p, 
4096 x 2160 /25p, 4096 x 2160 / 30p 
Single link 3G-SDI: 
SMPTE ST 424 compliant, [ YP
BPR 4:2:2 10-bit]
 1080 / 60p, 1080 / 50p, 2048 x 1080 /48p, 2048 x 1080 / 50p, 2048 x 1080 / 60p, [ RGB 4:4:4 12-bit /10-bit, 
YP
BPR 4:4:4 12-bit /10-bit] 1080 / 60i, 1080 / 50i, 1080 /25p, 1080 /25sF, 1080 /24p, 1080 /24sF, 1080 / 30p, 1080 / 30sF, [ RGB 4:4:4 12-bit /10-bit, YP
BPR 4:4:4 12-bit/10-bit, 
X’Y’Z’ 4:4:4 12-bit*
3] 2048 x 1080 /24p, 2048 x 1080 /24sF, 2048 x 1080 /25p, 2048 x 1080 /25sF, 2048 x 1080 / 30p, 2048 x 1080 / 30sF
* Resolution 5120 x 3200 Pixels
  (QUAD PIXEL DRIVE: ON)
** 
						

							3-Chip DLP™ Projector
PT-RQ13K
More Accurate Color ReproductionThe PT-RQ13K captures a more accurate Rec. 709-compliant color space than comparable 
laser projectors. A blue laser ensures greater precision while an expanded color gamut 
improves white balance accuracy.
SOLID SHINE Laser Technology
Meets 3-Chip DLP
™ Projection
Bright and Vivid Picture QualityCombining 3-Chip DLP™ imaging with Panasonic’s original SOLID SHINE Laser technology, 
the PT-RQ13K achieves lifelike 4K+
 resolution with a high 10,000 lm of brightness. Two 
power ful solid-state laser light source modules and three independent DLP™ chips for red, 
green, and blue ensure outstanding brightness, color accuracy, and contrast. Ultra-Durable Laser Optical Engine for Continuous 
24-hour OperationDual-Drive Laser Optical Engine uses two discrete light sources grouping laser diodes into 
modules. A laser light source redundancy circuit ensures minimal reduction in brightness and 
color uniformity in the event of laser diode failure, making the PT-RQ13K ideal for applications 
where maintaining vision is critical. Further, brightness decreases gradually and in a linear 
rather than exponential fashion (as is common to lamp-based projectors) over its 
20,000-hour*
1 maintenance-free service life.
Heat-resistant phosphor wheel 
ensures high brightness and 
excellent reliability for long periods.
Synchronize
23
Scintillating Picture Quality in 4K+
 Resolution
Quad Pixel Drive Goes Beyond 4K    
 
   The PT-RQ13K achieves better-than-4K resolution by employing a high-speed 2560 x 1600-pixel (WQXGA) DMD chip that shifts each pixel vertically and 
horizontally, effectively quadrupling the pixel count. Working together with Real Motion Processor 240 Hz frame-creation technology, Quad Pixel Drive 
produces stunningly detailed 5120 x 3200-pixel (4K+
, 16:10) images that retain natural sharpness and clarity when upscaling from a native Full HD source. As 
well as producing liquid-smooth and accurate video, the added detail also makes small text clearly legible on images used in presentations and lectures.
Screen Resolution
Beyond UltraHD5120 x 3200*
Pixel Quadrupling TechnologyShifting pixels vertically and horizontally creates ultra-high-resolution pictures that exceed standard UltraHD.New Real Motion ProcessorPanasonic’s unique high-speed 240 Hz frame-creation technology for up to 5120 x 3200-pixel 
(16:10) images ensures the smoothest reproduction of fast-moving 4K+
 sequences.
* Maximum physical resolution.
10,000 lm
4K+
3-Chip DLP
™ Projector
Lenses sold separately.PT-
RQ13K
60 fps 240 fps
A+
B+
C+
D
X4
Speed
60 fps
Creates 4K+
with 4 Frames
The World’s First 
240 Hz Drive 
4K Source
3840 x 2160 (16:9)Upscaling
5120 x 2880 (16:9)
DCAB
A+
B+
C+
D
2.5K PixelsOriginal Pixel (2.5K) Pixel Quadrupling
X4 Pixel 
Density
4K+
* Pixels
Creates 4K+
* Image
AB
DC
X4 
Speed
Add breathtaking 4K+
 projection to any venue with the PT-RQ13K, the world’s most compact** 3-Chip DLP™ 
projector. With Quad Pixel Drive rendering pixels invisible in film-like 5120 x 3200 video, and 10,000 lm of 
consistently bright SOLID SHINE Laser power, performance is nothing short of spectacular. Pair with any lens from 
Panasonic’s 3-Chip DLP™ family ( including those in your current inventory) and see how the PT-RQ13K’s small size, 
powered lens shift, and 360 ° multi-axis rotation saves you time and money in permanent or temporary installations. 
In fact, you can expect up to 20,000 hours*
1 of continuous maintenance-free operation 
at full power—just one of many reasons to choose Panasonic.
Clear and natural images without visible pixels
RQ13K
*1 At 20,000 hours, projector brightness will have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after every 20,000-hour period (approximately). 
Light source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period. Image is simulated.Imag
e e iss s
The World’s Smallest and Lightest** 
3-Chip DLP
™ 4K+
 Laser Phosphor Projector
*
* Resolution 5120 x 3200 Pixels
  (QUAD PIXEL DRIVE: ON)
** Weight and size claim is accurate as of November 2015 among 10,000 lm-class projectors with 4K or higher resolution.   
						

							Detail Clarity Processor 5+
 Clarifies and Enhances Fine DetailsPanasonic’s new generation circuit technology analyzes each individual image 
frame by frame to clarify areas containing fine details and textures. Powerful 
algorithms extract hidden information from the super high, high, medium, and 
low frequency video bands, sharpening outlines, correcting contours, and 
reducing ringing noise to improve the sense of resolution. The PT-RQ13K 
adds an exclusive Refine Enhancer algorithm designed to clean and enhance 
the finest details in 4K+
 images.
Low-pass filter
Mid-pass filter  Horizontal signal component
Vertical signal 
component
High-pass filterSuper-high-pass filter
Detail analysis engineRefine Enhancer for UltraHDFrequency analysis engine
System Daylight View 3 Improves Color PerceptionThis proprietary technology optimizes image quality to improve color 
perception of images projected onto walls and other exotic surface materials 
(ideal for mapping applications) as well as in environments with bright ambient 
light. Combined with high 10,000 lm brightness, the PT-RQ13K delivers clear 
and comfortable viewing in the most challenging applications.Waveform Monitor FunctionWhen source device output level fluctuates due to the performance of the 
device or its cable connections, the original black and white levels of the 
image cannot be reproduced correctly. The PT-RQ13K displays the 
waveforms on screen where they can be adjusted either automatically or 
manually as preferred.
Single-Cable 4K DIGITAL LINK ConnectionBased on HDBaseT™ technology, DIGITAL LINK supports transmission of 
4K video signals and control commands through a single cable for 
distances of up to 50 m (164 ft )*
13. An optional ET-YFB200G DIGITAL LINK 
Switcher or ET-YFB100G Digital Interface Box fur ther 
simplifies installation in large venues while reducing 
cost and improving reliability.
Note: ET-YFB100G / ET-YFB200G is not compatible with 4K signals. Transmission of 1080/60p 
signals (1920 x 1080 pixels, dot clock frequency 148.5 MHz ) for up to 150 m (492 ft ) is 
available in Long Reach Mode with the optional ET-YFB200G DIGITAL LINK Switcher ( requires 
CAT 5e cable or above). Transmission distance is up to 100 m ( 328 ft ) in other cases. 
Selectable Operational Modes Maintain Image Quality Longer • Approx. 20,000 Hours*
7 of Continuous Operation ( Normal Mode )
In Normal Mode with a maximum 10,000 lm brightness, PT-RQ13K can 
operate continuously for approximately 20,000 hours*
7. In Eco Mode at 8,000 
lm, this is extended to approximately 24,000 hours*7 of continuous 
operation. These modes are ideal for education or signage applications.
• Up to 10 Years*
8 Operation with Constant Brightness Modes 
In environments where very high brightness is not necessary, such as 
surveillance, control, and simulation rooms, constant operation modes 
extend light source replacement to up to 87,600 hours*
8 in Long Life 3 Mode—
about 10 years of 24/ 7 projection—with consistent brightness and color.
• User Operating Mode
In addition to preset operating modes, the PT-RQ13K can be customized 
to achieve your preferred balance of brightness or extended life. 
Brightness can be set from 1,900 to 10,000 lm or the lifetime set to a 
maximum of 10 years.
*9 When operational mode is set to Normal, operating temperature is from 0 °C (32 °F ) to 45 °C (113 °F ), and operating temperature is from 0 °C (32 °F ) to 40 °C (104 °F ) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft ) above sea level. When 
operational mode is set to Eco or Long Life 1/2/3, operating temperature is from 0 °C (32 °F ) to 40 °C (104 °F ). When used with Smoke Cut Filter, operating temperature is from 0 °C (32 °F ) to 35 °C (95 °F ). Projector cannot be used in locations over 2,700 m (8,858 
ft) with operational mode set to Eco or Long Life 1/2/3. When used with Smoke Cut Filter, the projector cannot be used in locations over 1,400 m (4,593 ft ). Light source brightness may decrease depending on operating temperature. When projector is operating at high 
temperature, brightness will decrease correspondingly.  *10 Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m
3 of particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning 
Engineers [ASHRAE ], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests.  *11 Usage environment may affect filter maintenance cycle.  *12 Please follow the procedures listed in the operating instructions when washing 
the filter with water. Replacement is recommended after filter has been washed and reused twice, or if filter is not sufficiently clean after washing.  *13 Audio transmission not supported on PT-RQ13K projectors. When using CAT 5e/6 cable or above, transmission of 4K 
signals up to 50 m (164 ft) is supported.  *14 While the input resolution will not change, maintaining image quality is not possible for images enlarged horizontally and vertically via the digital zoom function.
Geometric Adjustment for Specially Shaped Screens*
4 
This function adjusts the image for projection onto spherical, cylindrical, and 
other specially shaped surfaces. Adjustments can be easily made using only 
the remote control, with no external equipment needed. New 4-Corner 
Adjustment and Keep Aspect Off functions also simplify fine adjustment.
Powerful Features to Deliver Consistently Brilliant Images
High Reliability, Low TCO, and Easy Maintenance
Flexibility and Functionality for Professional Users
Dynamic Contrast Function for High 20,000:1*
5 Contrast
The PT- RQ13K projector directly modulates laser power output to enable high 
contrast while reducing power consumption. Digitally controlled frame-by-
frame scene-linking modulation ensures highly precise light output adjustment, 
and accurate 20,000:1*
5 contrast is achieved even when bright and dark 
scenes suddenly or frequently interchange. There is also almost no drop in 
contrast after extended use.
Flexible Setup and Smooth OperationUnlike conventional lamp-based projectors, 
the PT-RQ13K’s SOLID SHINE Laser system 
allows free 360-degree installation through 
any axis. Together with extra-wide-range 
powered lens shift and a big range of 
optional lenses shared by Panasonic’s 
3-Chip DLP™ projector family, the 
PT-RQ13K can be mounted in any way 
desired without picture distortion.
Quick Start and Quick OffThe laser light source does not require any warm-up time, so images appear 
almost instantly with PT-RQ13K projectors. There’s also no cooling time 
required when turning the power off. Users can turn the projector on and off 
immediately as many times as necessary.
45
Multi-Screen Support System Seamlessly Connects Multiple Screens• Edge Blending: The edges of adjacent screens can be blended and their   
   luminance controlled.
• Color Matching: This function corrects for slight variations in the color 
   reproduction range of individual projectors. PC software assures easy,    
   accurate control.
• Digital Image Enlarging: PT-RQ13K features a digital zoom function that  
   allows images to be enlarged up to approximately 10 times (horizontally and  
   vertically)*
14. Up to 100 units (10 x 10) can be edge-blended at a time to 
   create large multi-screen images. 
Without
edge
blendingWith 
edge 
blending
ProjectorsEdge blending
Color matchingOverlapping 
image edges 
Eco Filter Extends Replacement Cycle to 20,000 Hours*
11
The Eco Filter includes an electrostatic Micro Cut Filter that 
collects minute dust particles with an ion effect. It joins 
with a dust-resistant cabinet to enable long-term use even 
in punishing conditions. A long maintenance cycle of up to 
20,000 hours*
11 reduces hassle, while the eco-friendly 
washable filter*12 can be reused to reduce cost and waste.
Dustproof for Ultimate EnduranceThe PT-RQ13K has hermetically sealed laser modules, a long-life Eco Filter, and a 
new air-intake system to extend life and maintain picture quality in dusty locations. 
SOLID SHINE Laser products exceed rigorous dustproofing requirements for 
operation in environments containing 0.150 mg of dust per cubic meter*
10.
Optional Smoke Cut FilterThe optional Smoke Cut Filter captures fine dust particles contained in smoke 
used for special effects.
*2 Refresh rate varies depending on vertical scanning frequency. Note that 240 Hz frame rate is downsampled back to 60 Hz when projecting at 4K+ resolution. *3 HDMI and DVI-D terminals available only on optional SLOT NX boards. Two boards of the same kind are 
required when displaying images at 240 Hz via simultaneous inputs.  *4 Geometric Adjustment and Upgrade Kit functions are not supported with simultaneous video signal input.  *5 With Dynamic Contrast Mode set to 3.  *6 This product is not a medical instrument. Do 
not use for actual medical diagnosis.  *7 At this time the brightness will have decreased to approximately half of its original level ( Dynamic Contrast Mode: 3, Image Mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after every 20,000-
hour period (approximately ). Light source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period.  *8 With Operating Mode set to Long Life 3, in which mode brightness is 
lowered to 1,900 lm. 24 hours/day x 365 days/year x 10 years = 87,600 hours. Replacement of parts other than the light source may be required in a shorter period. 
Efficient Cooling System Assures Reliable OperationThe PT-RQ13K employs a newly developed direct liquid cooling system for the 
laser light source that features a redesigned air intake and a solid aluminum 
heat sink to suppress temperature rises. This allows stable operation in 
ambient temperatures of up to 45 °C (113 °F )*
9 while reducing operating noise 
to just 46 dB.
Vertical 360 °Horizontal 360 °
Conventional projector
Detail Clarity Processor 5+
Ideal for mapping
off
1234 65
Ideal for bright environments
DICOM Simulation Mode*
6
 This imaging mode is similar to the DICOM Part 14 medical imaging standard. 
It lends a film-like resolution to X-ray images, making the PT-RQ13K ideal for 
medical presentations and training.
Normal Mode DICOM Simulation Mode
OFF Projection Mapping (Projection onto Buildings)
Auditoriums and Halls (Projection in Bright Environments)
ON
OFF ON
Enhancement Level
System Daylight View 2System Daylight View 3
3,7005,00010,0 0 0lm
8,000
Operation2,80 0
1, 9 0 0
5,000
 
20,000
24,000 43,800 61,320 87,600
Normal
  hrs
Long Life 3
Long Life 2
4,0 0 0
Long Life 1
ECO
Original Panasonic Technology Reduces Motion Blur Real Motion Processor uses sophisticated algorithms to create three 
additional frames for each image, boosting native 60 fps footage to 240 
frames per second. The result is incredibly smooth and realistic motion 
rendering, particularly useful for the broadcast of sporting events and other 
fast-paced video. Further, images of up to 240 Hz*
2 can be displayed with SDI, 
DVI-D, and HDMI simultaneous inputs*
3*4. A refined optical engine enhances 
focus performance for a lifelike sense of resolution, contrast, and fluidity.
Frame Creation: OFF Frame Creation: ONInterpolated frames
60 frames per second Up to 240 frames per second
Unique 
Panasonic 
Processor
Interpolated fra
mes
Ui 
						

							Geometry Manager Pro and Optional Upgrade Kit 
( ET-UK20 Series )*
4 
Geometry Manager Pro software enables more flexible and complex 
adjustment to expand built-in geometric adjustment functionality. The free 
software package includes functions such as color matching and edge 
blending for multi-screen projection and easy adjustment of multiple screens 
over the network. An optional ET-UK20 Upgrade Kit adds creative masking 
capability using four lines or bitmap data as well as uniformity correction. 
Further, the PT-RQ13K projector supports optional ET-CUK10 Auto Screen 
Adjustment Upgrade Kit *
15.
Multi Monitoring & Control SoftwareThis software lets you control and monitor multiple projectors at the same 
time over wired LAN. If a problem occurs, an alert is sent to the monitoring /
controlling PC. 
Create masking data
Use to overlap 
projected imageImage projected only in 
designated areas
Bitmap Masking Line Masking
*15 Available worldwide except in the United States.  *16 Combination of primary/secondary input terminals is fixed. Supported combination as standard is SDI 1 ( primary ) and SDI 2 (secondary ) with a variety of combinations available with the addition of optional terminal 
boards excluding the combination of DVI-D and HDMI. The Backup Input Setting is enabled only when the input signal to the primary and secondary terminals is the same. HDMI and DVI-D terminals are available only with optional boards.  *17 Projector firmware and 
board firmware must be updated to Version 2.0 or later (scheduled for February 2016 ) before using the optional 3G-SDI Terminal Board ( TY-TBN03G ). Contact your sales representative for more information.* Projector firmware and board firmware must be updated to Version 2.0 or later (scheduled February 2016 ) before using the optional 3G-SDI Terminal Board ( TY-TBN03G ). Contact your sales representative for more information.  ** Use ET-PKD520H Ceiling Mount Bracket 
( for high ceiling ) and ET-PKD520S Ceiling Mount Bracket ( for low ceiling) in combination with ET-PKD520B Projector Mount Bracket.  *** ET-PKD520B Projector Mount Bracket can optionally be used with an existing ET-PKD510H / PKD510S projector mount bracket.
Image from
projector 1
Image from
projector 2
Images from
projector 1 and 2 
Switch quickly
DMX512
Multi-Unit Brightness and Color ControlThis function automatically corrects brightness and color fluctuations that 
occur over time in individual projectors in a multi-screen system. Up to eight 
projectors connected by a hub can be controlled increasing to a maximum of 
2,048 projectors with Multi Monitoring & Control Software.Extensive ConnectivityThe PT-RQ13K features four built-in 3G-SDI inputs and a DIGITAL LINK 
terminal. The projector also features Panasonic’s convenient SLOT NX to 
accommodate optional terminal boards that offer a range of connections 
including HDMI, DVI, and SDI*
17.Time Brightness
(A) (B)Brightness
fluctuations 
Time Brightness
(A´)
(B´)
Preset
brightness After a certain time has passed (B)  After a certain time has passed (B´ ) 
Projector 1 Projector 2 Projector 1 Projector 2
At the time when the projectors are installed (A) Conventional Projector
At the time when the projectors are installed (A´ ) Multi-Unit Brightness Control “ON”
Projector 1 Projector 2 Projector 1 Projector 2
Early Warning Software ET-SWA100 Series (Optional )Early Warning Software monitors the status of projectors and displays 
connected to an intranet, and informs the operator when an abnormality is 
detected or predicted, and when there are symptoms of trouble. This 
minimizes downtime to provide more stable operation.
Backup Input Setting Assures Reliability and 
Optimizes PerformanceIn the event of signal disruption, a Backup Input Setting allows the primary 
signal to be switched to a backup input signal *
16. This function ensures high 
reliability and is ideal for mission-critical control rooms, projection mapping, 
staging, and other applications where image display should not be interrupted.
Art-Net DMX CompatibleThe PT-RQ13K is compatible with Art-Net DMX protocol for lighting 
management. Art-Net compatibility allows the projector to be connected to a 
lighting console with easy control of functions such as shutter on /off, input 
change, power on /off, etc., together with lighting control.
Backup Input Setting Conventional SystemMultiple-unit widescreen projection Multiple-unit widescreen projection
Source
Secondary sourcePrimary source
If the main input signal is disrupted,  
image display is cut offIf primary signal is disrupted, backup 
signal smoothly engages to maintain 
image display
Effective Lighting Management
Partially blank!
Lighting Console
CAT5e (STP) cable or higher Projector (PT-RQ13K)Various Lighting Equipment
67 Terminals Dimensions
unit: mm (inches)
740 (29-1/8) 725 (28-17/32)
270(10-5/8) 323.5(12-23/32)
195.5 (7-11/16)
578 (22-3/4) 484 (19-1/16)
Dimension Definitions
SCREEN TOP
SCREEN TOP SCREEN
SCREEN PROJECTOR
PROJECTOR SCREEN BOTTOMSCREEN BOTTOM
If using lens other than the ET-D75LE90If using the ET-D75LE90
1. REMOTE 1 IN terminal
2. REMOTE 1 OUT terminal
3. REMOTE 2 IN terminal
4. SERIAL IN terminal5. SERIAL OUT terminal
6. FRAME SYNC 1 IN/OUT terminal
7. FRAME SYNC 2 OUT terminal
8. DIGITAL LINK/LAN terminal9. SDI IN terminal
8
9
1
2
3
4
5
6
7
1.0 0
Throw Ratio0.39 0.7 1.2 1.4 1.8 2.6 4.9 7.3 7. 9
14.8
2.0 3.0 4.0 5.0 6.0 7.0
ET-D75LE30
ET-D75LE50
LE6ET-D75LE6
ET-D75LE20
ET-D75LE40
ET-D75LE10
ET-D75LE90
LE10
LE90
LE50
Shares Common LensesThe PT-RQ13K shares optional lenses with the Panasonic 
3-Chip DLP™ projector range, including the ET-D75LE90 
Ultra-Short-Throw Lens and ET-D75LE8 Zoom Lens for long 
throw distances, reducing cost of ownership for staging and 
event companies with extensive projector inventories.ET-D75LE6Zoom Lens 
ET-UK20 SeriesGeometry Manager Pro 
Upgrade KitET-CUK10 Series Auto Screen Adjustment 
Upgrade Kit
(except in the United 
States)
ET-SFR330Smoke Cut Filter  ET-EMF330
Replacement Filter Unit
ET-PFD510Frame
ET-PKD520S**Ceiling Mount Bracket
(for low ceiling)ET-PKD520B***Projector Mount 
BracketET-PKD520H**Ceiling Mount Bracket
 (for high ceiling )
ET-D75LE10Zoom Lens
ET-D75LE20Zoom Lens
ET-D75LE30Zoom Lens
 
ET-D75LE40Zoom Lens
ET-D75LE8Zoom Lens
ET-D75LE50Fixed-Focus Lens 
ET-D75LE90Fixed-Focus Lens
ET-YFB100GDigital Inter face Box
ET-YFB200GDIGITAL LINK SwitcherET-SWA100 SeriesEarly Warning Software
ET-MDNDV10Interface Board for DVI-D 2 Input
 ( Input x 2 )
TY-TBN03G* 3G-SDI Terminal Board
 ( Input x 4 )
ET-MDNHM10 Interface Board for HDMI 2 Input
 ( Input x 2 )
Optional Accessories
* With the optional ET-D75LE10 lens.
ET-D75LE8
637 (25-3/32)
Projection DistancePT-RQ13K (16:10 aspect ratio)
unit: meters (inches)unit: meters (inches)
Throw distance (
A)
min.max.
ET-D75LE6(57.5)
(66.1)
(74.8)
(83.1)
(100.4)
(126.0)
(168.9)
(211.4)
(254.3)1.46 
1.68
1.90
2.11
2.55
3.20
4.29
5.37
6.46(68.9)
(79.1)
(89.3)
(99.6)
(120.1)
(150.8)
(202.0)
(253.1)1.75
2.01
2.27
2.53
3.05
3.83
5.13
6.43 1.78 [ 70 ˝ ]
2.03 [80˝ ]
2.29 [90˝ ]
2.54 [100˝ ]
3.05 [120˝ ]
3.81 [150˝ ]
5.08 [200˝ ]
6.35 [250˝ ]
(296.9)7.54
(355.5)9.03
8.89 [350˝ ]
(425.2)10.80
(509.1)12.93
12.70 [ 5 0 0 ˝ ]
(852.8)21.66
(1021.3)25.94
25.40 [1000˝ ](339.8)8.63
(406.7 )10.33
10.16 [400˝ ]
(510.6)12.97
(611.4)15.53min.max.
ET-D75LE10(80.7)
(92.5)
(104.3)
(116.5)
(140.6)
(176.4)
(236.2)
(296.1)
(356.3)2.05
2.35
2.65
2.96
3.57
4.48
6.00
7.52
9.05(104.3)
(119.7)
(135.0)
(150.8)
(181.5)
(228.0)
(305.5)
(383.1)2.65
3.04
3.43
3.83
4.61
5.79
7.76
9.73
(416.1)10.57
(537.8)13.66
(595.7)15.13
(770.1)19.56
(1194.9)30.35
(1544.9)39.24 (476.0)12.09
(615.3)15.63
(715.7 )18.18
(925.2)23.50min.max.
ET-D75LE20(103.9)
(119.3)
(134.6)
(150.0)
(180.7)
(226.8)
(303.5)
(380.0)
(456.7)2.64
3.03
3.42
3.81
4.59
5.76
7.71
9.65
11.60(151.6)
(173.6)
(196.1)
(218.1)
(262.6)
(329.5)
(440.9)
(552.4)3.85
4.41
4.98
5.54
6.67
8.37
11.20
14.03
(533.5)13.55
(775.2)19.69
(763.4)19.39
(1109.4)28.18
(1529.9)38.86
(2223.6)56.48 (610.2)15.50
(886.6)22.52
(916.9)23.29
(1332.3)33.84min.max.
ET-D75LE30(150.4)
(172.4)
(194.5)
(216.9)
(261.0)
(327.6)
(437.8)
(548.4)
(659.1)3.82
4.38
4.94
5.51
6.63
8.32
11.12
13.93
16.74(293.3)
(336.2)
(379.1)
(422.0)
(507.9)
(636.6)
(851.2)
(1065.7)7.45
8.54
9.63
10.72
12.90
16.17
21.62
27.07
(769.7)19.55
(1494.5)37.96
(1101.6)27.98
(2138.2)54.31
(2207.9) 56.08
(4283.1)108.79 (880.3)22.36
(1709.1)43.41
(1322.8)33.60
(2567.3)65.21min.max.
ET-D75LE40(290.2)
(332.7)
(374.8)
(417.3)
(502.0)
(629.1)
(840.9)
(1052.8)
(1264.6)7.37
8.45
9.52
10.60
12.75
15.98
21.36
26.74
32.12(466.5)
(533.9)
(601.6)
(668.9)
(803.9)
(1006.7)
(1344.1)
(1681.9)11.85
13.56
15.28
16.99
20.42
25.57
34.14
42.72
(1476.4)37.50
(2357.1)59.87
(2111.4)53.63
(3370.1)85.60
(4229.5)107.43
(6746.5)171.36 (1688.2)42.88
(2694.9)68.45
(2535.0)64.39
(4045.3)102.75
ET-D75LE50(42.9)
(49.2)
(55.9)
(62.2)1.09
1.25
1.42
1.58
(75.2)1.91
(94.9)
(127.2)
(159.8)
(192.5)2.41
3.23
4.06
4.89
(224.8)5.71
(322.4)8.19
(647.6)16.45 (257.5)6.54
(387.4)9.84
15. 24 [6 0 0 ˝ ](304.3)7.73
(460.6)11.70
(663.8)16.86
(1279.9)32.51 
(2019.7 )51.30min.max.
ET-D75LE8(458.7)
(526.3)
(594.1)
(661.8)
(797.2)
(1000.4)
(1339.0)
(1677.6)
(2016.1)11.65
13.37
15.09
16.81
20.25 
25.41
34.01
42.61
51.21(874.0)
(1000.8)
(1127.6)
(1254.3)
(1508.3)
(1888.6)
(2522.8)
(3157.1)22.20
25.42
28.64
31.86
38.31
47.97
64.08
80.19
(2354.7)59.81
(4426.0)112.42
(3370.1)85.60
(6328.7)160.75
(6755.5)171.59
- - (2692.9)68.40
(5060.2)128.53
(4047.2)102.80
(7597.2)192.97 (3791.7)96.31
7. 6 2  [ 3 0 0 ˝ ]Diagonal 
image sizeDiagonal 
image sizeET-D75LE90
min. max.
(A) (E)
(10.6)
(14.6)
(20.9)
(27.6)
(33.9)
(40.6)
(46.9)
(59.8)
(72.8)0.27
0.37
0.53
0.70
0.86
1.03
1.19
1.52
1.85 (39.8)
(49.6)
(66.1)
(81.9)
(98.4)
(114.6)
(130.7)
(163.4)
(195.7)(16.5)
(22.0)
(30.7)
(39.7)
(48.8)
(57.9)
(66.9)
(84.6)
(102.8) 1.01
1.26
1.68
2.08
2.50
2.91
3.32
4.15
4.97
(B)(40.9)
(50.8)
(66.9)
(83.1)
(99.2)
(115.7)
(131.9)
(164.2)
(196.9)1.04
1.29
1.70
2.11
2.52
2.94
3.35
4.17
5.00
(C)(28.7)
(38.6)
(54.7)
(71.3)
(87.4)
(103.5)
(119.7)
(152.4)
(184.6)0.73
0.98
1.39
1.81
2.22
2.63
3.04
3.87
4.69
(D)(0.4)
(10.2)
(26.4)
(42.5)
(58.7)
(75.2)
(91.3)
(123.6)
(156.3)0.01
0.26
0.67
1.08
1.49
1.91
2.32
3.14
3.970.42
0.56
0.78
1.01
1.24
1.47
1.70
2.15
2.61min. max.
(F)
(23.2)
(27.2)
(33.9)
(40.2)
(46.5)
(53.1)
(59.4)
(72.4)
(85.4)0.59
0.69
0.86
1.02
1.18
1.35
1.51
1.84
2.17(29.1)
(34.6)
(43.7)
(52.8)
(61.4)
(70.5)
(79.5)
(97.6)
(115.4)0.74
0.88
1.11
1.34
1.56
1.79
2.02
2.48
2.93
PT-RQ13K (16:10 aspect ratio)3.05 [120˝ ]
3.81 [150˝ ]
5.08 [200˝ ]
6.35 [250˝ ]
7. 6 2  [ 3 0 0 ˝ ]
8.89 [350˝ ]
10.16 [400˝ ]
12.70 [ 5 0 0 ˝ ]
15. 24 [6 0 0 ˝ ] 
						

							For more information about Panasonic projectors, please visit :
Projector Global Website – 
panasonic.net/avc/projector
Facebook – 
www.facebook.com/panasonicprojector
Yo uTu b e  –  
www.youtube.com/user/PanasonicProjector
 
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without 
notice. Product availability differs depending on region and country. This product may be subject to export control 
regulations. DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. 
The projection distances and throw ratios given in this leaflet are for use only as guidelines. For more detailed 
information, please consult the dealer from whom you are purchasing the product. The PJLink trademark is an 
application trademark in Japan, the United States, and other countries and regions or registered trademarks. HDMI, 
the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing 
LLC in the United States and other countries. All other trademarks are the property of their respective trademark 
owners. Projection images simulated. 36 USC 220506 © 2015 Panasonic Corporation. All rights reserved.
All information included here is valid as of November 2015.
PT-RQ13KG1 Printed in Japan.
SpecificationsPower supply
Cabinet materials Installation Power consumption
DLP™ chip
Scanning 
frequency
Terminals
Dimensions (W × H × D) 
Operation noise*
2
Operating environmentSD-SDI: 
SMPTE ST 259 compliant, [ YC
BCRR 4:2:2 10-bit ] 480i, 576i
*1 Refresh rate varies depending on vertical scanning frequency.  *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.  *3 Optional 3G-SDI Terminal Board ( T Y-TBN03G ) is not compatible with this signal.  *4 Geometric Adjustment and 
Upgrade Kit functions are not supported with simultaneous video signal input.  *5 Only compatible with dot clock frequency of 27 MHz ( pixel repetition signal ).  *6 Optical axis shift is not supported on the E T-D75LE50.  *7 When using Frame Sync In / Out terminals, projector firmware must be updated 
to Version 2.0 or later (scheduled February 2016 ). Contact your sales representative for more information.  *8 Average value. May differ depending on the actual unit. *9 When operational mode is set to Normal, operating temperature is from 0 °C ( 32 °F ) to 45 °C (113 °F ), and operating temperature 
is from 0 °C ( 32 °F ) to 40 °C (104 °F ) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) above sea level. When operational mode is set to Eco or Long Life 1/2 / 3, operating temperature is from 0 °C ( 32 °F ) to 40 °C (104 °F ). When used with Smoke Cut Filter, operating 
temperature is from 0 °C ( 32 °F ) to 35 °C ( 95 °F ). Projector cannot be used in locations over 2,700 m ( 8,858 ft) with operational mode set to Eco or Long Life 1/2 / 3. When used with Smoke Cut Filter, the projector cannot be used in locations over 1,400 m (4,593 ft). Light source brightness may 
decrease depending on operating environment.  *10 Available worldwide except in the United States.Weight*
8
1,270 W ( 0.3 W with Standby Mode set to Eco, 4 W with Standby Mode set to Normal )
Normal Mode: 913 W, Eco Mode: 782 W, Long Life 1 Mode: 531–732 W, Long Life 2 Mode: 477–702 W, Long Life 3 Mode: 423 – 665 W ( Operating temperature: 25 °C, Altitude: 700 m, 
IEC62087: 2008 Broadcast Content, Image Mode: Dynamic, Dynamic Contrast Mode: 3 )
Lens
Optional (no lens included with this model )
Refresh rate
Light source
Laser diodes laser Class 1 ( Class 3R for US models )
Light source life*
2: 20,000 hours ( Normal Mode ) / 24,000 hours ( Eco Mode ). At this time the brightness will have decreased to approximately half of its original level.
Single link HD-SDI: 
SMPTE ST 292 compliant, [
YP
BPR 4:2:2 10-bit]
 720/60p, 720/50p, 1035/60i, 1080/60i, 1080/50i, 1080/25p, 1080/25sF, 1080/24p, 1080/24sF, 1080/30p, 1080/30sF 
SDI 1/ SDI 2 simultaneous input (x 2 speed )
*4: 1080 / 60p, 1080 / 50p (1st frame: SDI 1, 2nd frame: SDI 2 )
SDI 1/ SDI 2 / SDI 3 / SDI 4 simultaneous input (x 4 speed )
*4: 1080 / 60p, 1080 / 50p (1st frame: SDI 1, 2nd frame: SDI 2, 3rd frame: SDI 3, 4th frame: SDI 4 )
DIGITAL LINK: 
Video signal resolution: 480i*
5/576i*
5– 4096 x 2160, still image signal resolution: 640 x 400 –2560 x 1600 ( non-interlace ), dot clock: 25 MHz–297 MHz
Dual link HD-SDI : 
SMPTE ST 372 compliant, [ YP
BPR 4:2:2 10-bit]
  1080 / 50p, 1080 / 60p, [ RGB 4:4:4 12-bit /10-bit , YP
BPR 4:4:4 12-bit /10-bit ] 1080 / 60i, 1080 / 50i, 1080 /24p, 1080 /24sF, 
1080 /25p, 1080 /25sF, 1080 / 30p, 1080 / 30sF, 2048 x 1080 /24p, 2048 x 1080 /24sF, 2048 x 1080 /25p, 2048 x 1080 /25sF, 2048 x 1080 / 30p, 2048 x 1080 / 30sF, [ XYZ 4:4:4 12-bit*
3] 
2048 x 1080 /24p, 2048 x 1080 /24sF, 2048 x 1080 /25p, 2048 x 1080 /25sF, 2048 x 1080 / 30p, 2048 x 1080 / 30sF
Panel size
Display method
Pixels
46 dB
Operating temperature: 0 – 45 °C ( 32–113 °F )*
9, operating humidity: 10 – 80 % ( no condensation ) AC 100 –240 V, 50 / 60 Hz
DLP™ chip × 3, DLP™ projection system
SDI IN 1Quad link HD-SDI: 
[YPBPR  4:2:2 10-bit] 3840 x 2160 /24sF, 3840 x 2160 /24p, 3840 x 2160 /25sF, 3840 x 2160 /25p, 3840 x 2160 / 30sF, 3840 x 2160 / 30p, 4096 x 2160/24sF, 
4096 x 2160 /24p, 4096 x 2160 /25sF, 4096 x 2160 /25p, 4096 x 2160 / 30sF, 4096 x 2160 / 30p
Quad link 3G-SDI : 
SMPTE ST 425 compliant, [ YP
BPR  4:2:2 10-bit ] 3840 x 2160 / 60p, 3840 x 2160 / 50p, 4096 x 2160 / 60p, 4096 x 2160 / 50p, [ YP
BPR  4:2:2 12-bit, YP
BPR  4:4:4 
10 /12-bit, RGB 10 /12-bit ] 3840 x 2160 /24sF, 3840 x 2160 /24p, 3840 x 2160 /25sF, 3840 x 2160 /25p, 3840 x 2160 / 30sF, 3840 x 2160 / 30p, 4096 x 2160 /24sF, 4096 x 2160 /24p, 
4096 x 2160 /25sF, 4096 x 2160 /25p, 4096 x 2160 / 30sF, 4096 x 2160 / 30p 10,0 0 0 lm 49,152,000 (12,288,000 x 4 ) pixels with Quad Pixel Drive set to ON, 12,288,000 ( 2560 x 1600 x 3 ) pixels with Quad Pixel Drive set to OFF
Resolution
5120 x 3200 pixels ( Quad Pixel Drive: ON, RGB signal input ) 22.9 mm ( 0.9 inches ) diagonal (16 :10 aspect ratio )
240 Hz*
1
1.78 –25.4 m ( 70 –1,000 in ) with 16 :10 aspect ratio
3.05 –15.24 m ( 120 – 600 in ) with the E T-D75LE90, 16 :10 aspect ratio
BNC × 1: 3G / HD / SD-SDI input, Dual-link HD-SDI input ( LINK-A ), Dual-link 3D-SDI input ( LINK-1), Quad-link 3G / HD-SDI input ( LINK 1)
BNC × 1: 3G / HD / SD-SDI input, Dual-link HD-SDI input ( LINK-B ), Dual-link 3D-SDI input ( LINK-2 ), Quad-link 3G / HD-SDI input ( LINK 2)
Screen size (diagonal)
Contrast*
2
20,000 :1 ( Full On / Full Off, Dynamic Contrast Mode: 3 )
Center-to-corner uniformity*
2
90 %
Brightness*
2
Molded plastic Horizontal/vertical, free 360-degree installation
SDI IN 2 Keystone correction range
Keystone correction range with optional 
Upgrade Kit ET-UK20*
4
Vertical: ±40 ° (± 22 ° with E T-D75LE50, ±28 ° with E T-D75LE6, +5 ° with E T-D75LE90 ), horizontal: ±15 ° ( 0 ° with E T-D75LE90 )
Vertical: ±45 ° (± 40 ° with E T-D75LE10 /20, ±22 ° with E T-D75LE50, ±28 ° with E T-D75LE6, +5 ° with E T-D75LE90 ), horizontal: ±15 ° with E T-D75LE6 /10 / 50, ±20 ° with E T-D75LE20, 
±25 ° with E T-D75LE30, ±30 ° with E T-D75LE40, ±40 ° with E T-D75LE8,  0 ° with E T-D75LE90, Up to a total of ±30 ° during simultaneous horizontal and vertical correction. 
BNC × 1: 3G / HD / SD-SDI input, Dual-link HD-SDI input ( LINK-B ), Dual-link 3D-SDI input ( LINK-2 ), Quad-link 3G / HD-SDI input ( LINK 4)
SDI IN 4
BNC × 1: 3G / HD / SD-SDI input, Dual-link HD-SDI input ( LINK-A ), Dual-link 3D-SDI input ( LINK-1), Quad-link 3G / HD-SDI input ( LINK 3)
SDI IN 3 
BNC × 1: Frame-synchronizing timing signal
Frame Sync IN/OUT*
7
BNC × 1: Frame-synchronizing timing signal
Frame Sync OUT*
7
Approximately 49 kg (108 lbs.) ( optional lens not included )
SERIAL IN
D-sub 9-pin (female) × 1 for external control ( RS-232C compliant )
SERIAL OUT
D-sub 9-pin (male) × 1 for link control
REMOTE 1 IN
M3 × 1 for wired remote control
REMOTE 1 OUT
M3 × 1 for link control (for wired remote control )
REMOTE 2 IN
D-sub 9-pin (female) × 1 for external control (parallel)
DIGITAL LINK/LAN
RJ-45 × 1 for network, DIGITAL LINK connection ( HDBaseT ™ compliant ), 100Base-T X, compatible with Art-Net, PJLink™ ( class 1), Deep Color, HDCP 2.2
Expansion Slot
x 2 ( SLOT 1, SLOT 2 ) ( Compatible with optional Input Board / Terminal Board )
Applicable software
Supplied accessories
578 x 270 x 725 mm ( 22 
3/4 × 10 
5/8 × 28 
17/32 ) ( Not including legs or protruding parts)
578 x 323.5 x 740 mm ( 22 
3/4 × 12 
23/32 × 29 
1/8 ) ( Including legs at shortest position and protruding parts)
Optical 
axis shift*
6
Horizontal
 (from center of screen)
Vertical
 (from center of screen)± 59 % (± 56 % with E T-D75LE6, +74 % – + 84 % with E T-D75LE90 ) ( powered )
±29 % (±19 % with E T-D75LE6, -12 % – +16 % with E T-D75LE90 ) ( powered )
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro ( E T-UK 20 Upgrade Kit and ET-CUK10*
10 Auto Screen Adjustment Upgrade Kit)*
4
Power cord x 2, wireless /wired remote control unit, batteries ( R6 /A A type × 2 ), Lens drop-prevention screw, software CD-ROM ( Logo Transfer Software, Multi Monitoring & Control Software)
Model
PT-RQ13K
A Small Box of Big Ideas for Picture-Perfect 4K+
Lenses sold separately.
3-Chip DLP™ Projector
PT-RQ13K
Dual link 3G-SDI : 
SMPTE ST 425 compliant, [ YP
BPR 4:4:4 12-bit /10-bit ] 1080 / 50p, 1080 / 60p, 2048 x 1080 /48p, 2048 x 1080 / 50p, 2048 x 1080 / 60p, [ RGB 4:4:4 12-bit /10-bit] 
1080 / 50p, 1080 / 60p, 2048 x 1080 /48p, 2048 x 1080 / 50p, 2048 x 1080 / 60p, [ YP
BPR 4:2:2 10-bit ] 3840 x 2160 /24p, 3840 x 2160 /25p, 3840 x 2160 / 30p, 4096 x 2160 /24p, 
4096 x 2160 /25p, 4096 x 2160 / 30p 
Single link 3G-SDI: 
SMPTE ST 424 compliant, [ YP
BPR 4:2:2 10-bit]
 1080 / 60p, 1080 / 50p, 2048 x 1080 /48p, 2048 x 1080 / 50p, 2048 x 1080 / 60p, [ RGB 4:4:4 12-bit /10-bit, 
YP
BPR 4:4:4 12-bit /10-bit] 1080 / 60i, 1080 / 50i, 1080 /25p, 1080 /25sF, 1080 /24p, 1080 /24sF, 1080 / 30p, 1080 / 30sF, [ RGB 4:4:4 12-bit /10-bit, YP
BPR 4:4:4 12-bit/10-bit, 
X’Y’Z’ 4:4:4 12-bit*
3] 2048 x 1080 /24p, 2048 x 1080 /24sF, 2048 x 1080 /25p, 2048 x 1080 /25sF, 2048 x 1080 / 30p, 2048 x 1080 / 30sF
* Resolution 5120 x 3200 Pixels
  (QUAD PIXEL DRIVE: ON)
**