Home > Panasonic > Projector > Panasonic Projector PT-RZ470UW User Manual

Panasonic Projector PT-RZ470UW User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Projector PT-RZ470UW User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Thank you for purchasing this Panasonic product.
     ■The Operating Instructions correspond to the firmware’
    
    s main version 3.02 and higher.
     ■Before operating this product, please read the instructions carefully and save this manual 
    for future use.
     ■Before using your projector
    
    , be sure to read “Read this first!” ( x
     
    
    pages   2   to   9).
    TQBJ0493-2
    DLPTM Projector  Commercial Use
    Operating Instructions
    Functional Manual
    ENGLISH
    Model No. PT-RZ470UK
    	 PT-RZ470UW
    	 PT-RW430UK
    	 PT-RW430UW 
    						
    							2 - ENGLISH
    Read this first!
    Read this first!
    WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT 
    TO RAIN OR MOISTURE.
    Power Supply: This Projector is designed to operate on 100   V - 240   V, 50   Hz/60   Hz AC, house current only.
    CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for 
    power supplies up to 125
      V. If you need to use higher voltages than this, you will need to obtain a 
    separate 250
      V power cord. If you use the accessory cord in such situations, fire may result.
    The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the 
    user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may 
    be of sufficient magnitude to constitute a risk of electric shock to persons.
    The exclamation point within an equilateral triangle is intended to alert the user to the presence of 
    important operating and maintenance (servicing) instructions in the literature accompanying the 
    product.
    CAUTION: This equipment is equipped with a three-pin grounding-type power 
    plug. Do not remove the grounding pin on the power plug. This plug 
    will only fit a grounding-type power outlet. This is a safety feature. If 
    you are unable to insert the plug into the outlet, contact an electricia\
    n. 
    Do not defeat the purpose of the grounding plug.
    Do not remove
    Notice on laser
    This projector is the Class 1 laser product that complies with IEC 60825-1.
    529
      (Top of product)
    529
      (Inside of product)  
    						
    							ENGLISH - 3
    Read this first!
    FCC NOTICE (USA)
    Verification
    Model Number:  
    PT
     -RZ470UK/PT-RZ470UW/PT-RW430UK/PT-RW430UW
    Trade Name: 
     
    Panasonic
    Responsible Party: 
    
     
    Panasonic Corporation of North 
     America
    Address:
     
    T
     wo Riverfront Plaza, Newark, NJ 07102-5490
    Telephone number: 
     
    (877)803-8492
    E-mail: 
    
     
    [email protected]
    This device complies with Part 15 of the FCC Rules.
    Operation is subject to the following two conditions:
    (1) 
    
    This device may not cause harmful interference, and (2) this device must accept any interference received, 
    including interference that may cause undesired operation.
    To assure continued compliance, follow the attached installation instructions and do not make any unauthorized  
    modifications.
    Caution:
    This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 
    15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
    when the equipment is operated in a commercial environment. This equipment generates, uses, and can 
    radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may 
    cause harmful interference to radio communications. Operation of this equipment in a residential area is likely 
    to cause harmful interference in which case the user will be required to correct the interference at his own 
    expense.
    NOTIFICATION (Canada)
    This class A digital apparatus complies with Canadian ICES-003.
    WARNING:
     f Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data 
    Processing Equipment, 
    
    ANSI/NFPA 75.
     fFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the 
    building installation wiring.
     fFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily 
    accessible.
    For USA-California Only
    This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling 
    may apply.
    See www.dtsc.ca.gov/hazardouswaste/perchlorate  
    						
    							4 - ENGLISH
    Read this first!
    WARNING:
     rPOWER
    The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible 
    when problems occur. If the following problems occur, cut off the power supply immediately.
    Continued use of the projector in these conditions will result in fire or electric shock.
     fIf foreign objects or water get inside the projector
    
    , cut off the power supply.
     fIf the projector is dropped or the cabinet is broken, cut of
    
    f the power supply.
     fIf you notice smoke, strange smells or noise coming from the projector
    , cut of
    
    f the power supply.
    Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
    During a thunderstorm, do not touch the projector or the cable.
    Electric shocks can result.
    Do not do anything that might damage the power cord or the power plug.
    If the power cord is used while damaged, electric shocks, short-circuits or fire will result.
     f Do not damage the power cord, make any modifications to it, place it near any hot objects, bend it 
    excessively
    
    , twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
    Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
    Completely insert the power plug into the wall outlet and the power conn\
    ector into the projector terminal.
    If the plug is not inserted correctly, electric shocks or overheating will result.
     f Do not use plugs which are damaged or wall outlets which are coming loose from the wall.
    Do not use anything other than the provided power cord.
    Failure to observe this will result in fire or electric shocks. Please note that if you do not use the provided power 
    cord to ground the device on the side of the outlet, this may result in electric shocks.
    Clean the power plug regularly to prevent it from becoming covered in du\
    st.
    Failure to observe this will cause a fire.
     f If dust builds up on the power plug, the resulting humidity can damage the insulation.
     fIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.
    Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly .
    Do not handle the power plug and power connector with wet hands.
    Failure to observe this will result in electric shocks.
    Do not overload the wall outlet.
    If the power supply is overloaded (ex., by using too many adapters), overheating may occur and fire will result.
     r ON USE/INSTALLATION
    Do not place the projector on soft materials such as carpets or sponge m\
    ats.
    Doing so will cause the projector to overheat, which can cause burns, fire or damage to the projector
    .
    Do not set up the projector in humid or dusty places or in places where \
    the projector may come into 
    contact with oily smoke or steam, ex. a bathroom.
    Using the projector under such conditions will result in fire, electric shocks or deterioration of components. 
    Deterioration of components (such as ceiling mount brackets) may cause the projector which is mounted on the 
    ceiling to fall down.
    Do not install this projector in a place which is not strong enough to t\
    ake the full weight of the projector 
    or on top of a surface which is sloped or unstable.
    Failure to observe this will cause projector to fall down or tip over the projector , and severe injury or damage 
    could result.  
    						
    							ENGLISH - 5
    Read this first!
    WARNING:
    Do not cover the air intake/exhaust ports or place anything within 500 mm (20") of them.
    Doing so will cause the projector to overheat, which can cause fire or damage to the projector .
     fDo not place the projector in narrow
    
    , badly ventilated places.
     fDo not place the projector on cloth or papers, as these materials could be drawn into the air intake port.
    Do not look at the light emitted from the lens while the projector is be\
    ing used.
    Doing so can cause loss of sight.
     f Strong light is emitted from the projector
    
    ’s lens. Do not directly look at this light.
    Do not expose your eyes and skin to the projection light while the proje\
    ctor is being used.
    Possibly hazardous optical radiation is emitted from this product, causing damage to your eyes and skin.
     f Be especially careful not to let young children look into the lens. In addition, turn of
    f the power and 
    disconnect the power plug when you are away from the projector
    
    .
    Never attempt to remodel or disassemble the projector.
    High voltages can cause fire or electric shocks.
     f For any inspection, adjustment and repair work, please contact an 
    Authorized Service Center
    
    .
    Doing so may cause exposure to dangerous laser radiation.
     f The laser module is built in this projector
    
    . Follow procedures specified in the Operating Instructions to make 
    operations and adjustments. 
    Do not allow metal objects, flammable objects, or liquids to enter inside of the projector . Do not allow 
    the projector to get wet.
    Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of the 
    projector.
     f Do not place containers of liquid or metal objects near the projector
    .
     fIf liquid enters inside of the projector
    
    , consult your dealer.
     fParticular attention must be paid to children.
    Use the ceiling mount bracket specified by Panasonic.
    Using the ceiling mount bracket other than the specified one will result in falling accidents.
     f Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.
    Installation work (such as ceiling mount bracket) should only be carried out by a qualified technician.
    If installation is not carried out and secured correctly
    
    , it can cause injury or accidents, such as electric shocks.
     fBe sure to use the wire provided with the ceiling mount bracket as an extra safety measure to prevent the 
    projector from falling down. (Install in a dif
    
    ferent location to the ceiling mount bracket.)  
    						
    							6 - ENGLISH
    Read this first!
    WARNING:
     rACCESSORIES
    Do not use or handle the batteries improperly, and refer to the following.
    Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.
     fUse 
    
    AA/R6/LR6 batteries.
     fDo not use unspecified batteries.
     fDo not use chargeable batteries.
     fDo not disassemble dry cell batteries.
     fDo not heat the batteries or place them into water or fire.
     fDo not allow the + and – terminals of the batteries to come into contact with metallic objects such as 
    necklaces or hairpins.
     fDo not store or carry batteries together with metallic objects.
     fStore the batteries in a plastic bag and keep them away from metallic objects.
     fMake sure the polarities (+ and –) are correct when inserting the batteries.
     fDo not use a new battery together with an old battery or mix dif
    ferent types of batteries.
     fDo not use batteries with the outer cover peeling away or removed.
    If the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary .
     fBattery fluid on your skin or clothing could result in skin inflammation or injury
    .
    Rinse with clean water and seek medical advice immediately
    
    .
     fBattery fluid coming in contact with your eyes could result in loss of sight.
    In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately
    .
    Do not use the supplied power cord with devices other than this projecto\
    r
    
    .
     fUsing the supplied power cord with devices other than this projector may cause short circuits or 
    overheating, and result in electric shock or fire.
    Remove the depleted batteries from the remote control promptly
    
    .
     fLeaving them in the unit may result in fluid leakage, overheating, or explosion of the batteries.  
    						
    							ENGLISH - 7
    Read this first!
    CAUTION:
     rPOWER
    When disconnecting the power cord, be sure to hold the power plug and po\
    wer connector.
    If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks 
    will result.
    When not using the projector for an extended period of time, disconnect \
    the power plug from the wall 
    outlet.
    Failure to do so may result in fire or electric shock.
    Disconnect the power plug from the wall outlet before carrying out any c\
    leaning.
    Failure to do so may result in electric shock.
     r ON USE/INSTALLATION
    Do not place heavy objects on top of the projector.
    Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or 
    injury. The projector will be damaged or deformed.
    Do not put your weight on this projector.
    You could fall or the projector could break, and injury will result.
     fBe especially careful not to let young children stand or sit on the proj\
    ector
    
    .
    Do not place the projector in extremely hot locations.
    Doing so will cause the outer casing or internal components to deteriorate, or result in fire.
     f T
    
    ake particular care in locations exposed to direct sunlight or near stoves.
    Do not place your hands or other objects close to the air exhaust port.
    Doing so will cause burns or damage your hands or other objects.
     f Heated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot 
    withstand heat close to this port.
    Always disconnect all cables before moving the projector
    
    .
    Moving the projector with cables still attached can damage the cables, which will cause fire or electric shocks to 
    occur.
    When mounting the projector on the ceiling, keep mounting screws and pow\
    er cord from contact with 
    metal parts inside the ceiling.
    Contact with metal parts inside the ceiling can cause electric shocks.
     r ACCESSORIES
    Ask your dealer about cleaning inside the projector every 20 000 hours o\
    f usage as an estimated 
    duration.
    Continuous use while dust is accumulated inside the projector may result in fire.
     fFor cleaning fee, ask your dealer
    
    .
    When not using the projector for an extended period of time, remove the \
    batteries from the remote 
    control.
    Failure to observe this will cause the batteries to leak, overheat, catch fire or explode, which may result in fire
    or contamination of surrounding area.  
    						
    							8 - ENGLISH
    Read this first!
    CAUTION:
     rVIEWING 3D VIDEO
    Those with a medical history of oversensitivity to light, heart problems\
    , or poor physical health should 
    not view 3D images.
    This may lead to a worsening of medical conditions.
    If you feel tiredness or discomfort, or other abnormality while viewing \
    with 3D Eyewear, discontinue 
    viewing.
    Continuing use may cause health problems. Take a break as necessary.
    When viewing 3D movies, aim to view one movie at a time and take a break\
     as necessary.
    When viewing 3D images, for example when playing 3D games or using a PC \
    where two way interaction  
    is possible, take an appropriate break every 30 to 60 minutes.
    Watching for long periods of time may cause eye fatigue.
    When preparing contents, use contents properly created to be used for 3D\
    .
    This may cause eye fatigue or health problems.
    When viewing 3D images, pay attention to people and objects in the vicin\
    ity.
    3D video may be mistaken for actual objects, and the related bodily movements can cause damage to objects 
    and lead to injury.
    Use 3D Eyewear when viewing 3D videos.
    Do not tilt your head when viewing with 3D Eyewear.
    Those who are near or far sighted, those with weaker eyesight in one eye\
    , or those with astigmatism 
    should use corrective glasses etc. when using 3D Eyewear.
    If the image appears distinctly double when viewing 3D video, discontinu\
    e viewing.
    Watching for long periods of time may cause eye fatigue.
    View at a distance of at least three times the effective height of the sc\
    reen.
    Viewing at distance closer than the recommended distance may cause eye fatigue. As with movies, if there are 
    black bands at the top and bottom of the video, view at a distance of 3 times or more of the height of the video 
    section.
    Children younger than 5 or 6 years old should not use 3D Eyewear.
    As it is difficult to gauge the reactions of children to fatigue and discomfort their condition may worsen suddenly
    .
    If a child uses the 3D Eyewear, guardians should beware of the child’s eyes becoming tired.  
    						
    							ENGLISH - 9
    Read this first!
    Brazil Only
    Brasil Apenas
     rManuseio de baterias usadas
    BRASIL
    Após o uso, as pilhas e/ou baterias deverão 
    ser entregues ao estabelecimento comercial 
    ou rede de assistência técnica autorizada.
    Cobrir os terminais positivo (+) e negativo (-) com uma fita isolante adesiva, antes de depositar numa caixa 
    destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos, gerar calor , romper 
    a blindagem e produzir fogo. (Fig. 1)
    Fig. 1
    Como isolar os terminais
    Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a 
    garganta, danificar o lacre do invólucro ou o vazamento provocar calor , ruptura da blindagem e produzir fogo 
    devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem ficar expostas a 
    temperaturas superiores a 100
      °C (212   °F). O gás liberado pela bateria pode irritar a garganta, danificar o lacre 
    do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos 
    terminais provocado internamente.
    Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante 
    água. Caso haja irritação, consulte um médico.
     r Remoção das baterias
    1. Pressione a guia e levante a tampa.
    (i)
    (ii)
    2. Remova as baterias.
    Fita Isolante
    Fita Isolante  
    						
    							 
    10 - ENGLISH
     rTrademarks
     fSOLID SHINE is a trademark of Panasonic Corporation.
     fRealD 3D is a trademark of RealD Inc.
     fWindows®, Windows Vista®, and Internet Explorer® are registered trademarks or trademarks of Microsoft Corporation in the 
    United States and other countries.
     f Mac, Mac OS, OS X, and Safari are registered trademarks of 
    
    Apple Inc. in the United States and other countries.
     fPJLinkTM is a registered trademark or pending trademark in Japan, the United States, and other countries and regions.
     fHDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing 
    LLC in the United States and other countries.
     fVGA
    
     and XGA are trademarks of International Business Machines Corporation in the United States.
     f SVGA
    
     is a trademark or registered trademark of Video Electronics Standards Association.
     f RoomV
    
    iew and Crestron RoomView are trademarks of Crestron Electronics, Inc.
    Crestron Connected and Fusion RV are trademarks of Crestron Electronics, Inc.
     f Adobe Flash Player is a trademark or registered trademark of 
    
    Adobe Systems Inc. in the United Stated and/or in other 
    countries.
     f All other names, company names, and product names mentioned in this manual are trademarks or registered trademarks of 
    their respective owners.
    Please note that the 
    ® and TM symbols are not specified in this manual.
     rIllustrations in this manual
     fIllustrations of the projector , screen, and other parts may vary from the actual product.
     rReference pages
     fReference pages in this manual are indicated as ( x  page 00).
     rTerm
     fIn this manual, the “Wireless remote control unit” accessory is referred to as “Remote control”.   
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Projector PT-RZ470UW User Manual