Panasonic Projector PT-RZ770 User Manual

							Chapter 7 Appendix — Technical information
ENGLISH - 201
Signal name
(SIGNAL FORMAT) Resolution
(Dots) Scanning freq.
Dot clock 
freq.
(MHz) Format
Color space SamplingHorizontal
(kHz)Vertical(Hz)
2K/25p 2
 
048
 
x
 
1
 
080 28.1 25.0 74.3 3G-SDI Level-A RGB 4:4:4 10bit
2
 
048
 
x
 
1
 
080 28.1 25.0 74.3 3G-SDI Level-B RGB 4:4:4 10bit
2
 
048
 
x
 
1
 
080 28.1 25.0 74.3 3G-SDI Level-A RGB 4:4:4 12bit
2
 
048
 
x
 
1
 
080 28.1 25.0 74.3 3G-SDI Level-B RGB 4:4:4 12bit
2K/30p 2
 
048
 
x
 
1
 
080 33.8 30.0
*174.3 3G-SDI Level-A RGB 4:4:4 10bit
2
 
048
 
x
 
1
 
080 33.8 30.0
*174.3 3G-SDI Level-B RGB 4:4:4 10bit
2
 
048
 
x
 
1
 
080 33.8 30.0
*174.3 3G-SDI Level-A RGB 4:4:4 12bit
2
 
048
 
x
 
1
 
080 33.8 30.0
*174.3 3G-SDI Level-B RGB 4:4:4 12bit
2K/48p 2
 
048
 
x
 
1
 
080 54.0 48.0
*1148.5 3G-SDI Level-A YPBPR4:2:2 10bit
2
 
048
 
x
 
1
 
080 54.0 48.0
*1148.5 3G-SDI Level-B YPBPR4:2:2 10bit
2K/50p 2
 
048
 
x
 
1
 
080 56.3 50.0 148.5 3G-SDI Level-A YP
BPR4:2:2 10bit
2
 
048
 
x
 
1
 
080 56.3 50.0 148.5 3G-SDI Level-B YP
BPR4:2:2 10bit
2K/60p 2
 
048
 
x
 
1
 
080 67.5 60.0
*1148.5 3G-SDI Level-A YPBPR4:2:2 10bit
2
 
048
 
x
 
1
 
080 67.5 60.0
*1148.5 3G-SDI Level-B YPBPR4:2:2 10bit
*1 The signal with 1/1.001x vertical scanning frequency is also supported.   
						

							Chapter 7 Appendix — Specifications
202 - ENGLISH
Specifications
The specifications of the projector are as follows.
Power supplyPT‑RZ770B, PT‑RZ770W, PT‑RZ770LB, 
PT‑RZ770LW, PT‑RZ770BD, PT‑RZ770WD, 
PT‑RZ770LBD, PT‑RZ770LWD, PT‑RZ770BA, 
PT‑RZ770WA, PT‑RZ770LBA, PT‑RZ770LWA, 
PT‑RW730B, PT‑RW730W, PT‑RW730LB, 
PT‑RW730LW, PT‑RW730BD, PT‑RW730WD, 
PT‑RW730LBD, PT‑RW730LWD, 
PT‑RW730BA, PT‑RW730WA, PT‑RW730LBA, 
PT‑RW730LWA, PT‑RZ660B, PT‑RZ660W, 
PT‑RZ660LB, PT‑RZ660LW, PT‑RZ660BD, 
PT‑RZ660WD, PT‑RZ660LBD, PT‑RZ660LWD, 
PT‑RZ660BA, PT‑RZ660WA, PT‑RZ660LBA, 
PT‑RZ660LWA, PT‑RW620B, PT‑RW620W, 
PT‑RW620LB, PT‑RW620LW, PT‑RW620BD, 
PT‑RW620WD, PT‑RW620LBD, 
PT‑RW620LWD, PT‑RW620BA, PT‑RW620WA, 
PT‑RW620LBA, PT‑RW620LWA
100
  V - 240   V ~ (100   V - 240   V alternating current), 
50   Hz/60   Hz
PT‑RZ770BT, PT‑RW730BT, PT‑RZ660BT, 
PT
-

RW620BT 110
  V ~ (110   V alternating current), 60   Hz
Power consumption PT‑RZ770B, PT‑RZ770W, PT‑RZ770LB, 
PT‑RZ770LW, PT‑RZ770BD, PT‑RZ770WD, 
PT‑RZ770LBD, PT‑RZ770LWD, PT‑RZ770BA, 
PT‑RZ770WA, PT‑RZ770LBA, PT‑RZ770LWA, 
PT‑RW730B, PT‑RW730W, PT‑RW730LB, 
PT‑RW730LW, PT‑RW730BD, PT‑RW730WD, 
PT‑RW730LBD, PT‑RW730LWD, 
PT‑RW730BA, PT‑RW730WA, PT‑RW730LBA, 
PT
-

RW730LWA 825
  W (8.3  
A
  - 3.3  
A)
PT

‑RZ770BT, PT‑RW730BT 825
  W (7.5  
A)
PT

‑RZ660B, PT‑RZ660W, PT‑RZ660LB, 
PT‑RZ660LW, PT‑RZ660BD, PT‑RZ660WD, 
PT‑RZ660LBD, PT‑RZ660LWD, PT‑RZ660BA, 
PT‑RZ660WA, PT‑RZ660LBA, PT‑RZ660LWA, 
PT‑RW620B, PT‑RW620W, PT‑RW620LB, 
PT‑RW620LW, PT‑RW620BD, PT‑RW620WD, 
PT‑RW620LBD, PT‑RW620LWD, 
PT‑RW620BA, PT‑RW620WA, PT‑RW620LBA, 
PT
-

RW620LWA 700
  W (7.1  
A
  - 2.8  
A)
PT

‑RZ660BT, PT‑RW620BT 700
  W (6.4  
A)
Power consumption (during 
standby) PT

‑RZ770B, PT‑RZ770W, PT‑RZ770LB, 
PT‑RZ770LW, PT‑RZ770BD, PT‑RZ770WD, 
PT‑RZ770LBD, PT‑RZ770LWD, PT‑RZ770BA, 
PT‑RZ770WA, PT‑RZ770LBA, PT‑RZ770LWA, 
PT‑RW730B, PT‑RW730W, PT‑RW730LB, 
PT‑RW730LW, PT‑RW730BD, PT‑RW730WD, 
PT‑RW730LBD, PT‑RW730LWD, 
PT‑RW730BA, PT‑RW730WA, PT‑RW730LBA, 
PT‑RW730LWA, PT‑RZ660B, PT‑RZ660W, 
PT‑RZ660LB, PT‑RZ660LW, PT‑RZ660BD, 
PT‑RZ660WD, PT‑RZ660LBD, PT‑RZ660LWD, 
PT‑RZ660BA, PT‑RZ660WA, PT‑RZ660LBA, 
PT‑RZ660LWA, PT‑RW620B, PT‑RW620W, 
PT‑RW620LB, PT‑RW620LW, PT‑RW620BD, 
PT‑RW620WD, PT‑RW620LBD, 
PT‑RW620LWD, PT‑RW620BA, PT‑RW620WA, 
PT‑RW620LBA, PT‑RW620LWA When [STANDBY MODE] is set to [ECO]: Approx. 
0.3
  W
PT‑RZ770BT, PT‑RW730BT, PT‑RZ660BT, 
PT
-

RW620BT When [STANDBY MODE] is set to [ECO]: Approx. 
0.2
  W
When [STANDBY MODE] is set to [NORMAL]: Approx. 3
  W
When the [QUICK STARTUP] function is enabled: Approx. 85
  W
DLP chip Size
PT‑RZ770, PT‑RZ660
17
  mm (0.67") (aspect ratio 16:10)
PT‑RW730, PT‑RW620 16.5
  mm (0.65") (aspect ratio 16:10)
Display system DLP chip x 1, DLP projection system
Number of pixels PT‑RZ770, PT‑RZ660
2
  304   000 pixels (1   920   x   1   200 dots)
PT‑RW730, PT‑RW620 1
  024   000 pixels (1   280   x   800 dots)   
						

							Chapter 7 Appendix — Specifications
ENGLISH - 203
Lens*1Electric zoomPT‑RZ770, PT‑RZ660
1.7 to 2.4:1
PT‑RW730, PT‑RW620 1.8 to 2.5:1
Electric focus F = 1.7 to 1.9
f = 25.6
  mm to 35.7   mm
Light source Laser light source, 2 sets
Light output
*2
PT‑RZ770, PT‑RW730 7   000   lm
*3, 7 200 lm (center)*4
(Both values are measured when [OPERATING MODE] 
is set to [NORMAL].)
PT‑RZ660, PT‑RW620 6
  000   lm
*3, 6 200 lm (center)*4
(Both values are measured when [OPERATING MODE] 
is set to [NORMAL].)
Contrast ratio
*310 000:1 (when [DYNAMIC CONTRAST] is set to [3])
Color system 7 standards (NTSC/NTSC4.43/P
AL/PAL - N/PAL - M/SECAM/PAL60)
Projected image size
*51.27 m (50") to 15.24 m (600")
Image aspect ratio 16:10
Projection method [FRONT/REAR]/[FLOOR/CEILING]
Power cord length 3.0
  m (118-1/8")
Outer case Molded plastic
Outer color Black model
Black
White model White
Dimensions Width
498
  mm (19-19/32")
Height 200
  mm (7-7/8") (with legs at shortest position)
Depth PT‑RZ770, PT‑RW730, PT‑RZ660, PT‑RW620
581
  mm (22-7/8") (including standard zoom lens)
PT‑RZ770L, PT‑RW730L, PT‑RZ660L, 
PT
-

RW620L 538
  mm (21-3/16") (excluding the Lens Mount Cover 
and optional lens)
Weight PT‑RZ770, PT‑RW730
Approx. 23.2
  k] (51.1   lbs.)
*6 (including standard zoom 
lens)
PT‑RZ770L, PT‑RW730L Approx. 22.4
 
k] (49.4
 
lbs.)
*6 (excluding the Lens Mount 
Cover and optional lens)
PT‑RZ660, PT‑RW620 Approx. 23.1
 
k] (50.9
 
lbs.)
*6 (including standard zoom 
lens)
PT‑RZ660L, PT‑RW620L Approx. 22.3
 
k] (49.2
 
lbs.)
*6 (excluding the Lens Mount 
Cover and optional lens)
Noise level
*3PT‑RZ770, PT‑RW730 37   dB
PT‑RZ660, PT‑RW620 35
  dB
Operating 
environment
Operating 
environment 
temperature
*70 °C (32 °F) to 45 °C (113 °F)
Operating 
environment 
humidity 10
  % to 80   % (no condensation)
Remote 
control Power supply
DC 3
  V (AAA/R03 battery x 2)
Operating range Within approx. 30
  m (98'5") (when operated directly in front of signal receiver)
Weight 102
  ] (3.6   ozs.) (including batteries)
Dimensions Width: 48
  mm (1-7/8"), Height: 145   mm (5-23/32"), Depth: 27   mm (1-1/16")
*1 The lens for PT-RZ770L series, PT- RW730L series, PT- RZ660L series, and PT- RW620L series is sold separately.
*2  V alue is for the supplied standard zoom lens. The value varies depending on the lens.
*3
 
Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21 1

18:2012 international standards.
*4
 
The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the 
ISO/IEC 21

118:2012 international standards.
*5
 
When the lens ET-
 DLE055 is used, the maximum size is 5.08   m (200"). When the lens ET
-
 DLE030 is used, the maximum size is 2.54   m (100") to 
8.89
  m (350").
*6
 
A
 verage value. Weight varies for each product.
*7
 
When using the projector at an altitude lower than 2
   700   m (8   858') above sea level, and the operating environment temperature becomes 35   °C 
(95
  °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2   700   m (8   858') and 
4
  200   m (13   780'), and the operating environment temperature becomes 25   °C (77   °F) or higher, the light output may be reduced to protect the 
projector.   
						

							Chapter 7 Appendix — Specifications
204 - ENGLISH
 rConnecting terminal
 terminal 1 set (BNC x 5 (RGB/YP
BPR/YCBCR/YC/VIDEO x 1))
RGB signal 0.7
 
V [p-p] 75   Ω (SYNC ON GREEN: 1.0   V [p-p] 75   Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
Y/C signal Y
: 1.0
 
V [p-p], C: 0.286
 
V [p-p] 75
 
Ω
VIDEO signal BNC 1.0
 
V [p-p], 75
 
Ω
 terminal 1 set, high-density D
-
Sub 15
 
p (female)
RGB signal 0.7
 
V [p-p] 75
 
Ω (SYNC ON GREEN: 1.0
 
V [p-p] 75
 
Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
 terminal 1 set, DVI
-
D 24
 
p, single link, DVI 1.0 compliant, HDCP compatible
 terminal 1 set, HDMI 19
 
p, HDCP compatible, Deep Color compatible
 terminal
(Only for PT
-

RZ770, PT
-

RZ660) 1 set (BNC)
SD
-
SDI signal SMPTE ST 259 compliant
HD
-
SDI signal SMPTE ST 292 compliant
3G
-
SDI signal SMPTE ST 424 compliant
/  
terminal D
-
Sub 9
 
p, 1 set each, RS
-
232C compliant, for computer control
/  terminal M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
 terminal 1 set, D
-
Sub 9
 
p, for contact control
 terminal 1 set, RJ
-
45, for network and DIGITAL LINK connections (HDBaseT
TM compliant), PJLink compatible, 
100Base
-
TX, Art-Net compatible, HDCP compatible, Deep Color compatible
Note
 f The model numbers of accessories and optional accessories are subject to\
 change without prior notice.   
						

							Chapter 7 Appendix — Specifications
ENGLISH - 205
 rCompatible signal
For details of the types of video signals that can be used with the projector , refer to “List of compatible signals” 
(x   page   198).
Video input, Y/C input
Horizontal: 15.73
  kHz, Vertical: 59.94   Hz; Horizontal: 15.63   kHz, Vertical: 50   Hz
RGB input
 f Resolution: 640

  x   400 to 1   920   x   1   200
 fDot clock frequency: 162

  MHz or less
 fPIAS (Panasonic Intelligent 

Auto Scanning) system
YC
BCR/YPBPR input
 f Resolution: 480i/576i to 1

  920   x   1   080
 fDot clock frequency: 148.5

  MHz or less
 fThe HD/SYNC and VD terminals do not support 3 value SYNC.
DVI

-
D input
 f Moving image signal resolution: 480i*1/576i*1 to 1 920 x 1 080
Still image signal resolution: 640
 
x
 
400 to 1
 
920   x   1   200 (non-interlace)
 fDot clock frequency: 25

 
MHz to 162
 
MHz
HDMI input
 f Moving image signal resolution: 480i*1/576i*1 to 1 920 x 1 080
Still image signal resolution: 640
 
x
 
400 to 1
 
920   x   1   200 (non-interlace)
 fDot clock frequency: 25

 
MHz to 162
 
MHz
SDI input
(Only for PT
-

RZ770, PT
-

RZ660)
SD
-
SDI signal
HD
-
SDI signal
3G
-
SDI signal
*1 Pixel-Repetition signal (dot clock frequency 27.0   MHz) only
Note
 fDIGITAL LINK input compatible signal is the same as HDMI input compatible signal.   
						

							Chapter 7 Appendix — Dimensions
206 - ENGLISH
Dimensions
Unit: mm
221 (8-11/16)249 (9-13/16)
498 (19-19/32) 457 (18)
442 (17-13/32)
20.5 (13/16)
115.5 (4-9/16)
200 (7-7/8) 43 (1-11/16)
538 (21-3/16)
* The above dimensions are obtained when the standard zoom lens is attache\
d.
*  Actual dimensions may dif fer depending on the product.   
						

							Chapter 7 Appendix — Precautions for attaching the Ceiling Mount Bracket
ENGLISH - 207
Precautions for attaching the Ceiling Mount Bracket
 fWhen installing the projector to the ceiling, be sure to use the optional Ceiling Mount Bracket (Model No.: 
ET
-

PKD120H (for High Ceilings), ET
-
 PKD120S (for Low Ceilings), ET
-
 PKD130H (for High Ceilings, 6-axis 
Adjustment), ET
-

PKD130B (Projector Mount Bracket)) specified by Panasonic. The Ceiling Mount Bracket 
(Model No.: ET
-

PKD120H (for High Ceilings), ET
-
 PKD120S (for Low Ceilings), ET
-
 PKD130H (for High Ceilings, 
6-axis Adjustment)) is used in combination with the Ceiling Mount Bracket (Model No.: ET
-

PKD130B (Projector 
Mount Bracket)).
 f Attach the drop-prevention set that comes with the Ceiling Mount Bracket to the projector . If you need the drop-
prevention set (Service Model No.: 

TTRA0214) is necessary, consult your dealer.
 fAsk a qualified technician to do the installation work such as mounting the projector on the ceiling.
 fPanasonic takes no responsibility for any damage to the projector resulting from use of the Ceiling Mount 
Bracket not manufactured by Panasonic or the inappropriate choice of location for installing the Ceiling Mount 
Bracket, even if the warranty period of the projector has not expired.
 fUnused products must be removed promptly by a qualified technician.
 fUse a torque screwdriver or 

Allen torque wrench to tighten bolts to their specified tightening torques. Do not use 
electric screwdrivers or impact screwdrivers.
(Screw tightening torque: 4 ± 0.5
  N·m)
 fRead the Installation Instructions of the Ceiling Mount Bracket for details.
 fThe model numbers of accessories and optional accessories are subject to\
 change without prior notice.


M6
Bottom view
12 mm (15/32)   
						

							Index
208 - ENGLISH
AAccessories    23
 terminal
     27, 55
Adjusting adjustable feet
     45
[ADV
ANCED MENU]
     76, 92
Art-Net
     21, 184
[Art-Net CHANNEL
 SETTING]
     152
[Art-Net SETUP]
     151
[Art-Net ST
ATUS]
     152
[ASPECT]
     87
Automatic setup function
     71
[AUT
O SETUP]
     100
 button
Projector body
    
 28, 71
Remote control
     25, 71
[AUT
O SIGNAL]
     100
B[BACK COLOR]    111
[BACKUP
 INPUT SETTING]
     101
[BLANKING]
     92
[BRIGHTNESS]
     79
[BRIGHTNESS CONTROL]
     123
CCautions on use      21
Cautions when installing
     17
Cautions when transporting
     17
Ceiling Mount Bracket
     207
[CLAMP
 POSITION]
     93
[CLOCK PHASE]
     89
[CLOSED CAPTION SETTING]
     11 0
[COLOR]
     80
[COLOR CORRECTION]
     99
[COLOR MA
TCHING]
     98
[COLOR 
TEMPERATURE]
     80
Connecting the power cord
     55
Connection
     48
[CONTRAST]
     79
[CONTROL
 DEVICE PASSWORD CHANGE]
     147
[CONTROL
 DEVICE SETUP]
     146
[Crestron Connected(TM)]
     171
[CUT
 OFF]
     11 6
D[DATE AND TIME]      129
 button
Remote control
    
 25, 75
Deleting the registered signal
     142
[DIGIT
AL CINEMA REALITY]
     92
DIGIT
AL LINK
     20
 button
Projector body
    
 28
Remote control
     25, 66
[DIGIT
AL LINK IN]
     106
[DIGIT
AL LINK MENU]
     151
[DIGIT
AL LINK MODE]
     149
[DIGIT
AL LINK STATUS]
     149
Dimensions
     206
Display language
     77, 97
[DISPLA
Y OPTION]
     77, 98
[DISPLA
Y SETTING]
     145
Disposal
     21
 button Projector body
    
 28
Remote control
     25, 66
[DVI-D IN]
     103
[DYNAMIC CONTRAST]
     84
EEarly Warning Software     21
[EDGE BLENDING]
     93
 button Projector body
    
 28
Remote control
     25, 74
Expanding signal lock-in range
     143
F button
Remote control     25, 67
[FRAME RESPONSE]
     95
[FREEZE]
     11 4
Function button
     71
 button Remote control
    
 25, 71
[FUNCTION BUTT
ON]
     135
G[GAMMA]    82 [GEOMETR Y]  
  
 89
H button
Projector body     28
Remote control
     25, 66
[HDMI IN]
     105
I button
Remote control     25, 72
[IMAGE ROT
ATION]
     111
[INITIALIZE]
     138
Initial setting
     57
[INITIAL
 STARTUP]
     128
[INPUT
 RESOLUTION]
     93
Installation mode
     32
L button
Projector body     28, 67
[LENS CALIBRA
TION]
     136
[LIGHT
 OUTPUT]
     122
Light source indicator
     175
List of compatible signals
     198
[LOAD 
ALL USER DATA]
     137
MMain menu     75
Main power switch
     27, 56
Maintenance
     177
 button Projector body
    
 28, 74
Remote control
     25, 74
Menu item
     76
[MUL
TI PROJECTOR SYNC]
     132
NNavigating through the menu     74
[NETWORK]
     78, 149
Network connection
     154
[NETWORK CONTROL]
     150
[NETWORK SETUP]
     150
[NETWORK ST
ATUS]
     151
[NOISE REDUCTION]
     84
[NO SIGNAL
 LIGHTS-OUT]
     128
[NO SIGNAL
 SHUT-OFF]
     128
O button
Remote control     25, 70
[ON-SCREEN DISPLA
Y]
     108
On-screen menu
     74
[OPERA
TION SETTING]
     11 8
Optional accessories
     24
P[PICTURE]    76, 79
[PICTURE MODE]
     79
[P
 IN P]
     78, 139
P
 IN P function
     139
[POSITION]
     76, 87
Power cord
     55
Power indicator
     55
Power on button Projector body
    
 28
Remote control
     25
Power standby button Projector body
    
 28
Remote control
     25
Precautions for attaching the Ceiling Mount 
Bracket
    
 207
Precautions for use
     17
Projecting
     66
[PROJECTION METHOD]
     11 7
Projector body
     27
[PROJECT
OR ID]
     11 7
[PROJECT
OR SETUP]
     77, 117
Protecting the registered signal
     143
Q[QUICK STARTUP]    127
R[RASTER POSITION]    96
Read this first!
     5
Registering new signals
     142
 terminal
     30
 terminal
     30  terminal  
  
 195
[REMOTE2 MODE]
    135
Remote control
    25
Remote control operations
    70
Removing/attaching the projection lens
     46
Renaming the registered signal
     142
Resetting to the factory default
     75
 button Remote control
 
   25, 66
 button Projector body
 
   28
 button Projector body
 
   28
[RGB IN]
    102
[RS-232C]
    133, 191
S[SAVE ALL USER DATA]    137
[SCHEDULE]
    130
[SCREEN SETTING]
    99
 button Projector body
 
   28
Remote control
    25, 66
[SDI IN]
    107
Security
    20
[SECURITY]
    78, 145
[SECURITY
 PASSWORD]
     145
[SECURITY
 PASSWORD CHANGE]
     145
Selecting the input signal
    66
Self-test indication
    180
 
terminal
 
   191
 
terminal
 
   191
[SER
VICE PASSWORD]
    138
Setting ID number of the remote control
     72
Setting up
    32
[SHARPNESS]
    83
[SHIFT]
    87
 button Remote control
 
   25, 67
 button Projector body
 
   28, 70
Remote control
    25, 70
[SHUTTER SETTING]
    11 3
[SIGNAL
 LIST]
    78, 142
Specifications
    202
sRGB-compliant video
    86
[ST
ANDBY MODE]
    127
[ST
ARTUP INPUT SELECT]
     128
[ST
ARTUP LOGO]
    111
[ST
ATUS]
    136
 button
Remote control
 
   25, 72
Sub memory
    144
Switching of
f the projector
    65
Switching on the projector
    56
Switching the input signal
    66
[SYSTEM DA
YLIGHT VIEW]
     83
[SYSTEM SELECT
OR]
    85
TTemperature indicator    175
[TEST
 PATTERN]
    78, 141
 button
Remote control
 
   25, 71
[TEXT
 CHANGE]
    146
[TINT]
    80
T
roubleshooting
    178
T
wo-window
    196
U[UNIFORMITY]    11 2
Upgrade Kit
    197
Using by connecting to the projector with a 
cable
 
   30
V button Remote control     25
W[WAVEFORM MONITOR]    11 4
W
eb control
    157
[WHITE GAIN]
    82
Z[ZOOM]    88
Index   
						

							Index
ENGLISH - 209
 buttonRemote control     25, 67   
						

							Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems
These symbols on the products, packaging, and/or accompanying documents mean that used 
electrical and electronic products and batteries must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used ba\
tteries, please take 
them to applicable collection points in accordance with your national le\
gislation.
By disposing of them correctly, you will help to save valuable resources and prevent any 
potential negative effects on human health and the environment.
For more information about collection and recycling, please contact your\
 local municipality.
Penalties may be applicable for incorrect disposal of this waste, in acc\
ordance with national 
legislation.
Note for the battery symbol (bottom symbol)
This symbol might be used in combination with a chemical symbol. In this\
 case it complies with 
the requirement set by the Directive for the chemical involved.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union.
If you wish to discard these items, please contact your local authoritie\
s or dealer and ask for the correct 
method of disposal.
Product Information (for Turkey only)
AEEE Yönetmeliğine Uygundur.
Eski Ekipman ve Bataryaların İşlenmesi.
Sadece geri dönüşüm sistemleri olan Avrupa Birliği ve ülkeleri için geçerlidir.
Ürünler, ambalaj ve/veya ekli belgeler üzerindeki bu semboller kullanılmış elektrik ve elektronik 
ürünlerin ve pillerin genel ev atığı ile karıştırılmaması gerektiğini ifade eder .
Eski ürünlerin ve pillerin toplanması ve geri kazanılması için bu atıkları lütfen yasayla belirlenmiş 
olan uygun toplama merkezlerine teslim ediniz.
Bu atıkların doğru işlenmesiyle, değerli kaynakların korunmasına ve insan sağlığı ve çevreye 
olası negatif etkilerinin engellenmesine yardımcı olabilirsiniz.
Atıkların toplanması ve geri dönüşümü için detaylı bilgi için lütfen bağlı olduğunuz yerel 
yönetimlerle iletişime geçiniz.
Atıkların atılmasıyla ilgili yanlış uygulamalar yasayla belirlenmiş olan cezalara sebebiyet verebilir.
W0816NN0 -YI
Panasonic System Communications Company of North America
5th Floor, Two Riverfront Plaza, Newark, NJ 07102-5490
TEL: (877) 803 - 8492
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
TEL: (905) 624 - 5010
Panasonic Corporation
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2016