Panasonic Projector PT-SW280A Specifications

							Go-Anywhere 
LCD Por table Projector
LCD Projectors
PT-
SX320A Series
PT-
SX320A/SX300A/SW280A
PT-SX320AG1 Printed in Japan. All information included here is valid as of September 2016.
For more information about Panasonic projectors, please visit: Projector Global Web Site – panasonic.net/avc/projectorFacebook – www.facebook.com/panasonicprojectorYouTube – www.youtube.com/user/PanasonicProjectorFor more information about
Panasonic Projectors and Professional Displays, pleaes visit:
Panasonic Visual System Solutions web site-http://panasonic.net/avc/visual_system/
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. 
Product availability differs depending on region and country. This product may be subject to export control regulations. 
The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed 
information, please consult the dealer from whom you are purchasing the product. Windows
® and Power Point® are 
either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. HDMI, 
the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing 
LLC. All other trademarks are the property of their respective trademark owners. Projection images simulated.
© 2016 Panasonic Corporation. All rights reserved.
1. The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping 
sound, or fail to illuminate, due to impact or extended use.
2. The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
    • Never place objects on top of the projector while it is in operation.  
    • Make sure there is an unobstructed space of 1000 mm(3 ft 3 in) or more around the projector’s exhaust openings. 
    • If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the 
operating temperature listed in the specifications table during use. Also, make sure the projector’s intake and exhaust     openings are not blocked.  Ensure there is sufficient ventilation to prevent hot air from the exhaust openings being 
recirculated into the intake opening.
3. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
    • The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
    • The brightness of the lamp will gradually decrease with use.
4. 
Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
Caution
NOTES ON USEDo not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
* Measurement, measuring conditions, and method of notation all comply with ISO  21118
   international standards.
unit: mm (inches)Dimensions
Specifications
Model
Power supply
LCD panel
Display method
Drive method Panel size
Pixels
Lamp replacement cycle
RGB
YP
BPR (YCBCR)
Video/S-Video
Vertical
Horizontal
HDMI IN
COMPUTER IN
RGB
YP
BPRY/C
VIDEO IN
AUDIO IN
SERIAL IN
Ceiling Mount Bracket
Replacement Lamp Unit
Conversion Cable
Wireless Module Lens
Screen size
Resolution
Brightness* (Lamp power: Normal)
Lamp
Center-to-corner uniformity*
Contrast*
Scanning 
frequency
Keystone 
correction range
Installation
Terminals
Built-in speaker
Dimensions (W  H  D)
Weight
Operating environment
Supplied accessories
Optional 
accessoriesAC100–240 V   50 Hz/60 Hz
Power consumption
295 W (0.5 W when STANDBY MODE set to ECO, 8W when STANDBY MODE set to Normal.)
Transparent LCD panel ( 3, R/G/B)
Active matrix15.0 mm (0.59 inches) diagonal (16:10 aspect ratio)
1,024,000 (1,280  800) pixels
Manual zoom (1.2 ), Manual focus lens, F=1.6 5–1.93, f=18.53– 22.18 mm, Throw Ratio: 1.4 –1.7:1
1,280  800 pixels (Input signals that exceed this 
resolution will be converted to 1,280  800 pixels.)
3,200 lm
80 %
2,000:1 (Lamp control: Normal, Image mode: Dynamic, Auto Powersave: Off) 
±30°
±30°
Ceiling/floor, front/rear f
H: 15–91 kHz, fV: 24–85 Hz, dot clock: 162 MHz or lower HDMI525i (480i)*, 625i (576i)*, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p
Dot clock: 25–162 MHz (640 x 400 pixels to 1920 x 1200 pixels) * Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
f
H: 15.7 kHz, fV: 59.9 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.6 kHz, fV: 50.0 Hz [PAL/SECAM/PAL-N] f
H: 15.7 kHz, fV: 59.9 Hz [525i (480i)],               fH: 15.6 kHz, fV: 50.0 Hz [625i (576i)],               fH: 31.5 kHz, fV: 59.9 Hz [525p (480p)],               fH: 31.3 kHz, fV: 50.0 Hz [625p (576p)],
fH: 45.0 kHz, fV: 60.0 Hz [750 (720)/60p],          fH: 37.5 kHz, fV: 50.0 Hz [750 (720)/50p],          fH: 33.8 kHz, fV: 60.0 Hz [1125 (1080)/60i],         fH: 28.1 kHz, fV: 50.0 Hz [1125 (1080)/50i],      
fH: 28.1 kHz, fV: 25.0 Hz [1125 (1080)/25p],      fH: 27.0 kHz, fV: 24.0 Hz [1125 (1080)/24p],      fH: 27.0 kHz, fV: 48.0 Hz [1125 (1080)/24sF],      fH: 33.8 kHz, fV: 30.0 Hz [1125 (1080)/30p],    
fH: 67.5 kHz, fV: 60.0 Hz [1125 (1080)/60p],      fH: 56.3 kHz, fV: 50.0 Hz [1125 (1080)/50p]
HDMI 19-pin  1, Deep Color, compatible with HDCP, Audio signal: Linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) 
D-sub HD 15-pin (female)  1, compatible with RGB/YP
BPR (YCBCR)/YC
0.7 Vp-p, 75 ohms (SYNC IN GREEN: 1.0 Vp-p, 75 ohms), SYNC/HD: TTL high impedance, automatic positive/negative polarity compatible, VD: TTL high impedance, automatic positive/negative polarity compatible
(The SYNC/HD and VD terminals do not support 3 value SYNC.)     
Y: 1.0 Vp-p (including sync signal), P
B/PR: 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Pin jack  1, 1.0 Vp-p, 75 ohms
M3 jack  1
D-sub 9-pin (female)  1 For external control (RS-232C compatible)
VIEWER/WIRELESSUSB type A x 1 (output DC 5 V, max.500 mA) Memory Viewer / Wireless module (Model No.: ET-WML100E) compatible
1 W (monaural)
Cabinet colorWhiteChampagne gold
307 mm  80 mm (when legs at shortest position)  210 mm (12-3/32  3-5/32  8-1/4 inches)
Approx. 2.3 kg (5.1 lbs)
Operating environment temperature: Normal use: 0 °C (32 °F) to 40 °C (104 °F) (Elevation: below 1,400 m (4,593 ft); When the ambient operating temperature is 35–40 °C (95–104 °F), [Lamp Power] will switch automatically to [Eco mode].)
                                                                          0 °C (32 °F) to 35 °C (95 °F) (Elevation: 1,400 m (4,593 ft)–2,700 m (8,858 ft))
Operating environment humidity: 20–80 % (no condensation)
• Wireless remote control unit ( 1)   • Power cord ( 2)   • Power cord safety hook   • CD-ROM ( 1) ··· Logo Transfer Software   • Batteries for remote control (R03/LR03/AAA type battery ( 2))   • RGB signal cable ( 1)
ET-PKB2
ET-LAL600
D-SUB/S-Video Conversion Cable: ET-ADSV
ET-WML100E 230 W UHM lamp
Normal: 4000 h/Eco: 5000 h (This value is calculated by continuously turning the lamp on for 3.5 hours and off for 0.5 hours.)3,000 lm 0.84–7.62 m (33–300 inches) diagonally
1,024  768 pixels 
(Input signals that exceed this resolution will be converted to 1,024  768 pixels.) 16 mm (0.63 inches) diagonal (4:3 aspect ratio) 
786,432 (1,024  768) pixels
PT-
SX320APT-
SX300APT-
SW280A PT-
SX320A Series
2,800 lm
Replacement Lamp UnitET-
LAL600
D-sub/S-Video Conversion CableET-
ADSV
Optional accessories
Ceiling Mount Bracket ET-
PKB2
Wireless ModuleET-
WML100E
80
(3-5/32)
69(2-23/32)
307 (12-3/32) 210 (8-1/4) 
						

							Easy to CarryEasy Operation
Excellent Performance and Flexibility in a Compact Body
The PT-SX320A Series are stylish, compact projectors for corporate users. They provide the ideal level of brightness for use in brightly lit places. They also offer wireless option* and other excellent functions.
Projection distance  unit: feet [meters]
• The value for L (distance to screen) varies slightly depending 
on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens 
characteristics may cause slight image distortion.Lower edge of projected image
Upper edge of projected image
L
Projected image
L H
H
The PT-SX320A Series provide 
portability with an A4-file-size, 
approximately 2.3 kg stylish compact 
body.
Daylight View BasicThis function ensures easy, comfortable viewing of presentations in bright 
rooms. Using a built-in ambient light sensor, it adjusts halftone colors and 
brightness levels to match ambient lighting.
Corner Keystone Correction Enables Angled ProjectionAll you need to do is designate four points as the corners of the 
projected image, and this function easily carries out horizontal and 
vertical keystone correction.
Excellent Performance
Curved Screen CorrectionBarrel and pincushion distortions are easily corrected when 
projecting onto a curved screen.
Without Daylight View Basic307 mm
Only 
4.4 liters!
With Daylight View Basic
Diagonal
image sizeProjection distance (
L) (
4:3 aspect ratio)min. (
wide)
max. (
tele)33˝
40˝
50˝
60˝
70˝
80˝
90˝
100˝
120˝
150˝
200˝
250˝
300˝[
0.84]
[
1.02]
[
1.27]
[
1.52]
[
1.78]
[
2.03]
[
2.29]
[
2.54]
[
3.05]
[
3.81]
[
5.08]
[
6.35]
[
7.62]0.259
0.314
0.391
0.468
0.548
0.625
0.706
0.783
0.940
1.174
1.565
1.956
2.348[
0.084] 
[
0.102] 
[
0.127] 
[
0.152] 
[
0.178] 
[
0.203] 
[
0.229] 
[
0.254] 
[
0.305] 
[
0.381] 
[
0.508] 
[
0.635] 
[
0.762] 
Hight from the edge
 of screen to center of lens (H)
3.7
4.7
5.6
6.1
7.1
9.2
10.2
11.5
13.9
17.0
22.1
28.6
34.5[
1.1]
[
1.4]
[
1.7]
[
2.1]
[
2.4]
[
2.8]
[
3.1]
[
3.5]
[
4.2]
[
5.2]
[
7.0]
[
8.7]
[
10.5]
PT-SX320A/SX300APT-SW280A
Flexible Usability
A Variety of Useful Features
• Pictures, videos, and any documents including PDF 
files/Power Point files, whatever are displayed on the PC 
screen can be projected.
• The images from up to four PCs can be projected 
simultaneously.
• Pictures, some documents including PDF files can be projected.
• Live camera mode / Annotate mode can be used.
• The images from up to four devices can be projected simultaneously.
* VueMagic™ Pro is a product of Pixelworks, Inc. For detailed information, refer to the following website.
   http://vuemagic.pixelworks.com
VueMagic™ Pro* for iOS/Android Devices
4-Window Multi Style
Memory Viewer Light FunctionJust insert a USB memory device into the projector and start projection 
straight away. There is no need for a PC. JPEG, BMP, PNG, GIF and 
TIFF images can be projected.Unplug the power code right after use by Direct 
Power Off. The internal cooling fan keeps operating 
using the internal power supply and automatically 
stops when cooled.
Intelligent Power Management Function Allows
Resistance to Sudden Voltage Fluctuations*1
Momentary power outages*2 or voltage drops*3 can cause the projector to shut 
down, interrupting the projection. The PT-SX320A Series equipped with the 
Intelligent Power Management function controls the power supply to cope with 
power fluctuations, to enable continued projection.
*1 Fluctuations may occur in the electricity power supply except the power outage.  *2 Continuing 0 V power supply 
during several tens of milliseconds.  *3 Power supply voltage reduction. Excluding momentary power outage.
Easy Lamp and Filter ReplacementFor easier maintenance, you can replace the lamp from the top of the 
unit and the air filter from the side, even after the projector is installed on 
the ceiling. This eliminates the need to detach the projector from its 
mounting bracket in ceiling-mounted applications.Equipped with an HDMI Input Terminal and Abundant InterfacesSupports a wide range of system architectures. 
Include an HDMI input terminal, a computer 
input terminal, and a USB connector.
Other Useful Features
Eco-
friendly• Ecology-conscious design• No halogenated flame retardants are used in the cabinet
• Lead-free glass is used for the lens.
• Coating-free cabinet for easy recycling. • Switchable lamp mode
• White board Mode  • Startup logo  • Built-in 1 W speaker  • Security bar for theft prevetion
A4-file-size and approx. 2.3 kg body
Clear images in bright places
Projects in various locationsEasy projection from a wireless device
69 mm*210 mm
* The optional ET-WML100E Wireless Module is required.
Easy Wireless Projection by Optional ModuleSimply inserting the optional 
ET-WML100E Wireless Module 
into the USB port on the projector 
enables easy wireless projection 
from Windows PCs, iOS devices, 
or Android devices on which the 
proper freeware is installed.
Presenter Light 1.0 for Windows® PCs
3.7
4.7
5.6
6.6
7.6
8.6
9.6
11.5
14.4
19.0
23.1
28.6[
1.1]
[
1.4]
[
1.7]
[
2.0]
[
2.3]
[
2.6]
[
2.9]
[
3.5]
[
4.4]
[
5.8]
[
7.3]
[
8.7] -
Diagonal
image sizeProjection distance (
L) (
16:10 aspect ratio)min. (
wide)
max. (
tele)33˝
40˝
50˝
60˝
70˝
80˝
90˝
100˝
120˝
150˝
200˝
250˝
300˝[
0.84]
[
1.02]
[
1.27]
[
1.52]
[
1.78]
[
2.03]
[
2.29]
[
2.54]
[
3.05]
[
3.81]
[
5.08]
[
6.35]
[
7.62]3.1
4.1
5.1
6.1
8.2
9.2
10.1
12.2
15.1
20.4
25.3
30.63.1
4.1
5.1
7.2
8.6
9.6
10.1
12.2
14.4
18.1
24.3
30.6
36.5[
1.2]
[
1.5]
[
1.8]
[
2.2]
[
2.6]
[
2.9]
[
3.3]
[
3.7]
[
4.4]
[
5.5]
[
7.4]
[
9.3]
[
11.1] [
1.2]
[
1.5]
[
1.8]
[
2.1]
[
2.5]
[
2.8]
[
3.1]
[
3.7]
[
4.6]
[
6.2]
[
7.7]
[
9.3]
Hight from the edge
 of screen to center of lens (H)
0.136
0.166
0.206
0.250
0.290
0.333
0.373
0.416
0.499
0.622
0.829
1.038
1.245[
0.044]
[
0.054]
[
0.067]
[
0.081]
[
0.094]
[
0.108]
[
0.121]
[
0.135]
[
0.162]
[
0.202]
[
0.269]
[
0.337]
[
0.404] -
Direct Power Off
* 69 mm: legs not included
Photo shows the PT-SX320A/SX300A
3,200 lm
PT-
SX320A
XGA
2,800 lm
PT-
SW280A
WXGA
3,000 lm
PT-
SX300A
XGA
Photo shows the PT-SW280A 
						

							Go-Anywhere 
LCD Por table Projector
LCD Projectors
PT-
SX320A Series
PT-
SX320A/SX300A/SW280A
PT-SX320AG1 Printed in Japan. All information included here is valid as of September 2016.
For more information about Panasonic projectors, please visit: Projector Global Web Site – panasonic.net/avc/projectorFacebook – www.facebook.com/panasonicprojectorYouTube – www.youtube.com/user/PanasonicProjectorFor more information about
Panasonic Projectors and Professional Displays, pleaes visit:
Panasonic Visual System Solutions web site-http://panasonic.net/avc/visual_system/
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. 
Product availability differs depending on region and country. This product may be subject to export control regulations. 
The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed 
information, please consult the dealer from whom you are purchasing the product. Windows
® and Power Point® are 
either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. HDMI, 
the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing 
LLC. All other trademarks are the property of their respective trademark owners. Projection images simulated.
© 2016 Panasonic Corporation. All rights reserved.
1. The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping 
sound, or fail to illuminate, due to impact or extended use.
2. The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
    • Never place objects on top of the projector while it is in operation.  
    • Make sure there is an unobstructed space of 1000 mm(3 ft 3 in) or more around the projector’s exhaust openings. 
    • If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the 
operating temperature listed in the specifications table during use. Also, make sure the projector’s intake and exhaust     openings are not blocked.  Ensure there is sufficient ventilation to prevent hot air from the exhaust openings being 
recirculated into the intake opening.
3. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
    • The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
    • The brightness of the lamp will gradually decrease with use.
4. 
Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
Caution
NOTES ON USEDo not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
* Measurement, measuring conditions, and method of notation all comply with ISO  21118
   international standards.
unit: mm (inches)Dimensions
Specifications
Model
Power supply
LCD panel
Display method
Drive method Panel size
Pixels
Lamp replacement cycle
RGB
YP
BPR (YCBCR)
Video/S-Video
Vertical
Horizontal
HDMI IN
COMPUTER IN
RGB
YP
BPRY/C
VIDEO IN
AUDIO IN
SERIAL IN
Ceiling Mount Bracket
Replacement Lamp Unit
Conversion Cable
Wireless Module Lens
Screen size
Resolution
Brightness* (Lamp power: Normal)
Lamp
Center-to-corner uniformity*
Contrast*
Scanning 
frequency
Keystone 
correction range
Installation
Terminals
Built-in speaker
Dimensions (W  H  D)
Weight
Operating environment
Supplied accessories
Optional 
accessoriesAC100–240 V   50 Hz/60 Hz
Power consumption
295 W (0.5 W when STANDBY MODE set to ECO, 8W when STANDBY MODE set to Normal.)
Transparent LCD panel ( 3, R/G/B)
Active matrix15.0 mm (0.59 inches) diagonal (16:10 aspect ratio)
1,024,000 (1,280  800) pixels
Manual zoom (1.2 ), Manual focus lens, F=1.6 5–1.93, f=18.53– 22.18 mm, Throw Ratio: 1.4 –1.7:1
1,280  800 pixels (Input signals that exceed this 
resolution will be converted to 1,280  800 pixels.)
3,200 lm
80 %
2,000:1 (Lamp control: Normal, Image mode: Dynamic, Auto Powersave: Off) 
±30°
±30°
Ceiling/floor, front/rear f
H: 15–91 kHz, fV: 24–85 Hz, dot clock: 162 MHz or lower HDMI525i (480i)*, 625i (576i)*, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p
Dot clock: 25–162 MHz (640 x 400 pixels to 1920 x 1200 pixels) * Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
f
H: 15.7 kHz, fV: 59.9 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.6 kHz, fV: 50.0 Hz [PAL/SECAM/PAL-N] f
H: 15.7 kHz, fV: 59.9 Hz [525i (480i)],               fH: 15.6 kHz, fV: 50.0 Hz [625i (576i)],               fH: 31.5 kHz, fV: 59.9 Hz [525p (480p)],               fH: 31.3 kHz, fV: 50.0 Hz [625p (576p)],
fH: 45.0 kHz, fV: 60.0 Hz [750 (720)/60p],          fH: 37.5 kHz, fV: 50.0 Hz [750 (720)/50p],          fH: 33.8 kHz, fV: 60.0 Hz [1125 (1080)/60i],         fH: 28.1 kHz, fV: 50.0 Hz [1125 (1080)/50i],      
fH: 28.1 kHz, fV: 25.0 Hz [1125 (1080)/25p],      fH: 27.0 kHz, fV: 24.0 Hz [1125 (1080)/24p],      fH: 27.0 kHz, fV: 48.0 Hz [1125 (1080)/24sF],      fH: 33.8 kHz, fV: 30.0 Hz [1125 (1080)/30p],    
fH: 67.5 kHz, fV: 60.0 Hz [1125 (1080)/60p],      fH: 56.3 kHz, fV: 50.0 Hz [1125 (1080)/50p]
HDMI 19-pin  1, Deep Color, compatible with HDCP, Audio signal: Linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) 
D-sub HD 15-pin (female)  1, compatible with RGB/YP
BPR (YCBCR)/YC
0.7 Vp-p, 75 ohms (SYNC IN GREEN: 1.0 Vp-p, 75 ohms), SYNC/HD: TTL high impedance, automatic positive/negative polarity compatible, VD: TTL high impedance, automatic positive/negative polarity compatible
(The SYNC/HD and VD terminals do not support 3 value SYNC.)     
Y: 1.0 Vp-p (including sync signal), P
B/PR: 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Pin jack  1, 1.0 Vp-p, 75 ohms
M3 jack  1
D-sub 9-pin (female)  1 For external control (RS-232C compatible)
VIEWER/WIRELESSUSB type A x 1 (output DC 5 V, max.500 mA) Memory Viewer / Wireless module (Model No.: ET-WML100E) compatible
1 W (monaural)
Cabinet colorWhiteChampagne gold
307 mm  80 mm (when legs at shortest position)  210 mm (12-3/32  3-5/32  8-1/4 inches)
Approx. 2.3 kg (5.1 lbs)
Operating environment temperature: Normal use: 0 °C (32 °F) to 40 °C (104 °F) (Elevation: below 1,400 m (4,593 ft); When the ambient operating temperature is 35–40 °C (95–104 °F), [Lamp Power] will switch automatically to [Eco mode].)
                                                                          0 °C (32 °F) to 35 °C (95 °F) (Elevation: 1,400 m (4,593 ft)–2,700 m (8,858 ft))
Operating environment humidity: 20–80 % (no condensation)
• Wireless remote control unit ( 1)   • Power cord ( 2)   • Power cord safety hook   • CD-ROM ( 1) ··· Logo Transfer Software   • Batteries for remote control (R03/LR03/AAA type battery ( 2))   • RGB signal cable ( 1)
ET-PKB2
ET-LAL600
D-SUB/S-Video Conversion Cable: ET-ADSV
ET-WML100E 230 W UHM lamp
Normal: 4000 h/Eco: 5000 h (This value is calculated by continuously turning the lamp on for 3.5 hours and off for 0.5 hours.)3,000 lm 0.84–7.62 m (33–300 inches) diagonally
1,024  768 pixels 
(Input signals that exceed this resolution will be converted to 1,024  768 pixels.) 16 mm (0.63 inches) diagonal (4:3 aspect ratio) 
786,432 (1,024  768) pixels
PT-
SX320APT-
SX300APT-
SW280A PT-
SX320A Series
2,800 lm
Replacement Lamp UnitET-
LAL600
D-sub/S-Video Conversion CableET-
ADSV
Optional accessories
Ceiling Mount Bracket ET-
PKB2
Wireless ModuleET-
WML100E
80
(3-5/32)
69(2-23/32)
307 (12-3/32) 210 (8-1/4)