Panasonic Pt Dw10000e Projector Specifications

							
 	




PT-

10,000lm
Full-HD DLP™ system projector
with 10,000 lumens of brightness. 
						

							Clear, bright projection of detailed HD images
Projection of
wide 16:9,
full-HD images
in large
spaces.
The PT-DW10000E is a full high-definition projector that can faithfully 
display HD content. High brightness is assured by a four lamp 
system that delivers 10,000 lumens, while dynamic iris 
technology achieves an outstanding 5,000:1 contrast 
ratio. Three-chip DLP
™ technology provides excellent 
resistance to deterioration due to aging, making the 
DW10000E an extremely reliable system projector.
PT-DW10000E
Theatres
Classrooms Conference rooms
1,080 pixels
1,920 pixels
High contrast ratio — 5,000:1High brightness —
10,000-lumen Full high definition —
1,080 pixels x 1,920 pixels 
						

							Panasonic's new technologies improve
reliability and installation ease
Minimal downtime, high efficiency, and a bright picture.
MULTI-LAMP OPTICAL SYSTEM
With Panasonic's original four lamp 
system, the PT-DW10000E generates 
10,000-lumen brightness. If one 
lamp burns out during operation, the 
remaining lamps provide plenty of 
light to continue projecting. A lamp 
relay mode is also included. 
Extended, continuous operation is 
possible by lamp mode selection.
Provides 2,000 hours of use without filter maintenance.
AUTO CLEANING ROBOT (ACR)
The PT-DW10000E is the world's first*1 projector with an 
automatic filter cleaning system. When you switch on the 
projector*
2, the air filter operates and the brush of the auto 
cleaning "robot" removes dust from the filter. This prevents the 
clogging results in malfunctions and other problems.
*1 As of  December, 2006.    *2 When using the timer, you cannot set the filter 
to be cleaned more than once every 24 hours. Cleaning occurs either when 
the system is switched on or when it is cooling down when the specified 
cleaning time comes. The timer can be set to any time between 00:00 and 
23:50 in 10-minute increments. You can also manually clean the filter using 
the menu on the on-screen display.    *3 Individual lint particles and pollen 
are examples of dust with a size of 10 microns.
Dramatically reduced the size, weight and volume.
1/2 CONCEPT
Panasonic's new liquid-cooling system made it possible to significantly 
downsize the PT-DW10000E, making it one of the most compact in its class. 
The size is 30% smaller than our previous model*, and the weight and 
volume are 70% less than our previous model*. The PT-DW10000E also 
offers flexible installation and is easy to operate.
* PT-D9510/PT-D9610
Weight
Dimensions
Volume
Power 
consumption100 kgW 753 mm x H 428 mm x D 1051 mm0.33 m3
32 kgW 578 mm x H 320 mm x D 643 mm0.11 m3
2,200 W 1,450 W PT-D9510/PT-D9610 PT-DW10000E
Air filter
Rear side of the filter tray
PanasonicOriginal
PanasonicOriginal
Worlds Smallest
10,000-Lumen DLP™ Projector*
578643 1051
320 428
753
Lamp replacement cycle and 
brightness guidelines
A new filter in the air intake section traps dust 
particles that are 10 microns*3 or larger. By 
capturing approximately 7 times as much dust 
as our previous filters, it guards against optical 
blocks and reduces the penetration of dust into 
to the interior to provide stable operation by, for 
example, preventing drops in brightness.
ACR brush
*The values above are maximum values when replacing all four 
lamps simultaneously. The hours may vary depending on the 
usage conditions. See the back page for details. 
Four lamps
Three lamps
Two lamps
One lamp Lamp mode
10,000
7,500
5,000
2,5002,000
3,000
4,000
8,000 Light output
(lumens)Lamp replacement
cycle (hours)
*As of December, 2006
Micro cut filter
(mm) 
						

							ON OFF
ON OFF
HIGH RELIABILITY
HIGH IMAGE QUALITY/FLEXIBLE INSTALLATION
Liquid-cooling system
Panasonic's original liquid-cooling system 
directly cools the DLP™ chips, which extends 
the PT-DW10000E's performance and 
attains a high level of reliability.
Dynamic iris
Incorporating exclusive Panasonic 
technology, the dynamic iris opens and 
closes with exceptional speed and precision 
as the input signal changes, resulting in 
accurate, real-time control of the light 
striking the DLP
™ chips. The dynamic iris is 
positioned immediately after the light 
synthesiser and before the integrator, so it 
has minimal adverse effect on the overall 
light uniformity across the screen.
Full 10-bit picture processing
The use of a full 10-bit image processing 
system provides smooth tonal expression. 
For example, skin tones appear natural and 
true to life.
New cooling structure
In order to further enhance the cooling 
efficiency, we completely revised the 
placement of various internal components 
and combined this with our popular cooling 
system to enable use in temperatures up to 
45˚C. This allows use in a wider variety of 
environments, and keeps the operation 
more stable even in harsh conditions.
Horizontal/Vertical lens shift
A wide adjustment range for the horizontal/
vertical lens shift assures virtually 
distortion-free images and adds 
convenience and versatility.  Fine 
adjustment is made within ±50 % from 
center in the vertical direction and within 
±30 % from center in the horizontal 
direction. (Horizontal: powered, Vertical: 
powered) 
*For the ET-D75LE6, the adjustment is within ±50 % in the 
vertical direction and ±15 % in the horizontal direction.
Optional lenses 
for various venues
Seven optional lenses with different throw 
distances are available. These powered 
zoom/focus lenses enable the projector to 
perform superbly in an array of projection 
environments. The lens 
cover opens in both 
front and top directions, 
making it easier to 
install the lens by 
viewing the mark on the 
top of the lens.
Web browser control/
monitoring and 
e-mail message alert
Lamp LED indicator and 
self-diagnosis function
3D colour management system
Compensation provides optimal levels of 
colour saturation, hue, and brightness that 
were not possible with conventional 
projectors. Colours approach those of the 
original image, even on large-screen displays.
This interlace/progressive conversion 
technology automatically detects when the 
input signal is derived from filmed material 
and selects the optimum progressive 
processing method to assure faithful 
reproduction of the original image.
Progressive cinema scan (3/2 pulldown)
The dynamic sharpness control circuit 
adjusts the video signal waveforms based on 
the difference in brightness of adjacent 
pixels for a sharp, clear picture that is 
relatively unaffected by signal noise.
Dynamic sharpness control
Anybody can operate the PT-DW10000E by 
remote control or monitor its status over a 
LAN network, because it is all done using 
the computer's familiar web browser. 
Furthermore, the PT-DW10000E sends an e-
mail message to notify the operator when an 
error has 
occurred, or 
a lamp 
needs to be 
replaced.
PanasonicOriginal
PanasonicOriginal
PanasonicOriginal
The projector body is 
equipped with a temperature 
alarm LED and a burnt-lamp 
alarm LED (for lamps 1 to 4). 
In previous models, the LED 
indicator was visible only 
from the front. In the PT-DW10000E the LED 
is visible from both front and top, so you can 
see it easily even if the unit is hung from the 
ceiling. Information on the location of the 
error is also given in the on-screen display. 
A self-diagnosis function is also provided. 
Error codes displayed on the 3-digit, 7-
segment LED on the side of the projector 
tell the operator where the problem is.
*Images are simulated.*Images are simulated.
OriginalOriginalimageimageOriginal
image
Without 
Without compensationcompensationWithout 
compensationAfterAftercompensationcompensationAfter
compensation
DLP™ chip
Reservoir tank
Cool directly
Radiator
PCPCPC PCPC
Remote control
e-mail
e-mail
Internet
LAN
LAN
PT-DW10000EPT-DW10000E
Company A
projectorCompany B
projector
Company C
controller
LAN
The LAN terminals support PJLink™ class 1 connection. 
Control with the same specifications is also possible 
when used in a multi-projector system with projectors of 
another brand.
PC PCPC 
						

							Lamp
MULTIPLE SYSTEM APPLIANCE
UNIVERSAL DESIGN
Easy lamp replacementOther features
You can remove the back cover by removing a 
single screw. This makes it easy to replace a 
lamp, even if the projector is suspended from 
the ceiling or 
tucked in a 
hard-to-reach 
space.
Grooved for easy handling
Optional accessories
Grooves on all four sides of the projector's 
bottom let you get a firm, comfortable grip on 
the unit and move it safely.
Built-in multi-screen support system
The PT-DW10000E can project large, multi-screen 
images without any additional equipment. Up to 100 
units (10 x 10) can be edge-blended at a time.
Multiple terminals including DVI-D and LAN slots
Multi-screen processor
When several units are used together, this function 
corrects for slight variations in the colour reproduction 
range of individual projectors. The PC software assures 
easy, accurate control. Independent, 7-axis adjustment 
(red, green, blue, yellow, magenta, cyan, white) ensures 
high precision and minimises colour variations. 
Colour matching
The edges of adjacent screens can be blended and 
their luminance controlled. For example, the adjoining 
edges in a 2x2 multi-screen system can be blended to 
create a smooth, seamless image.
The PT-DW10000E comes equipped with DVI-D and LAN 
(PJ-Link™) slots. It also features an array of terminals, 
including two RGB inputs, a 5-BNC connector and D-
sub HD 15-pin, serial in/out, S-video input, two remote 
inputs, and one remote out. In addition to offering DVI-D 
control, the PT-DW10000E is HDCP*-compliant and 
thus meets a broad range of projection needs.
*High-Bandwidth Digital Content Protection
•Mechanical lens shutter  •Picture in picture  
(main/sub input source combinations possible 
only when using computer and video)  •Anti-theft 
features with chain opening  •ID assignment for 
up to 64 units  •Coordinated groups  •Digital 
vertical keystone correction  •Built-in test 
pattern •Selectable 9-language on-screen menu 
(English, German, French, Spanish, Italian, 
Russian, Japanese, Chinese, Korean)
Edge blending
The lens can also be adjusted using the lens 
adjustment direct key that was newly added to 
the remote control.Blind touch operation key/
New remote control
The keys have pits 
and projections 
that let you 
operate the 
projector by blind 
touch. A light can 
also be turned on 
to illuminate the control panel, for easy 
operation in a darkened room. The wireless 
operation range has been extended to 30 m, 
giving you control from a greater distance. 
Thanks to the backlight, you can check all the 
keys on the remote control even in the dark. 
Replacement lamp unitET-LAD10000
ET-LAD10000F (four pack)
SD-SDI Input signal boardET-MD77SD1
HD/SD Input signal boardET-MD77SD3
DVI-D Input signal boardET-MD77DV
Zoom lensET-D75LE6 (0.9 - 1.1:1)
ET-D75LE1 (1.4 - 1.8:1)
ET-D75LE2 (1.8 - 2.8:1)
ET-D75LE3 (2.8 - 4.6:1)
ET-D75LE4 (4.6 - 7.4:1)
ET-D75LE8 (7.3 - 13.8:1)Fixed focus lensET-D75LE5 (0.7:1)ET-HAD100 ET-PFD100
Lens
Input signal board*Frame
High-ceiling mount bracketET-PKD100HLow-ceiling mount bracketET-PKD100S
Ceiling mount bracketCarrying handle
ET-D75LE1
ET-LAD10000
With
edge blendingWithout
edge blending
Overlapping image edgesSource PT-DW10000E
PT-DW10000E
Colour matchingEdge blending
*When edge blending and colour matching are set, the brightness and colour balance at the boundaries where screens are joined 
may lack uniformity due to differences in the uniformity of the screen gain directivity, the brightness of each lamp mode, etc.
*The LAN terminal on each board, when mounted, cannot be used because the LAN terminal on the main unit has priority.
Panasonic works from every angle to minimise 
environmental impact in the product design, production 
and delivery processes, and in the performance of the 
product during its life cycle. The PT-DW10000E reflects 
the following ecological considerations.
•Lead-free solder is used to mount components to the printed 
  circuit boards.
•The non-coated cabinet enables easy recycling.
•Lamp power switching further reduces power consumption.
•
Auto Power Save activates standby mode when no signal is input.•The packing case and operating manual are made from 
  recycled paper.
Ecological-conscious design 
						

							 	
 

 

 	 	
	 	
 	  
 		
 
 

  

	   
 
 	
   		 
 		   !
	 
# $ %& 	

(& 	 		 
 !

	
	 )
 	
 

	
  
 		 	  
 
 
* 		 

 +

 !	 	
,$+# ,$+ 

 	
 ,$+ 	
 

 	 		 
 	 !


 +-$
 		  	
 		
 		 
 -		
#  
 	# 	
 



 	
 
 
  		
./ 0112 		   !
	 
#$   *
+3,415 43126
*715 +
 
 -		


 	

 
		  
    	

	

Specifications Dimensions
Shape of the power outlet connection
DLP™ chip Panel size 
Display method
Pixels 
Lamp
Brightness
Contrast ratio
Resolution RGB
Video
Lens
Screen size
Lens shift
RGB input scanning frequency
Component signal
Video signal
Terminals VIDEO IN
     VIDEO OUT
S-VIDEO IN
RGB1/YP
BPR IN
RGB2 IN
DVI-D IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN 
Keystone correction range
Installation 
Power cord length
Power supply
Power consumption
Dimensions (W x H x D)
Weight
Operating temperature
Operating humidity
Supplied accessories0.95 diagonal (16:9 aspect ratio)
DLP
™ chip x 3 (R, G, B), DLP™ projection system
2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels
250 W UHM
™ lamp x 4 (four lamp system)
10,000 lumens (four-lamp operation mode)
5,000:1 (full on/full off, in Dynamic iris 3 mode)
1,920 x 1,080 pixels 
(1,600 x 1,200 pixels compatible, compression mode)
560 TV lines
Optional powered zoom/focus lenses
70 - 600 inches, 16:9 aspect ratio 
(70 - 300 inches, 16:9 aspect ratio with the ET-D75LE5)
Vertical, Horizontal (
powered) 
fH 15-100 kHz, fV 24-120 Hz
Dot clock 20-162 MHz
480i, 480p, 576i, 576p, 720/60p, 720/50p, 1035/60i, 
1080/25p, 1080/24p, 1080/24sF, 1080/30p, 1080/60i, 
1080/50i, 1080/50p, 1080/60p
f
H 15.75/15.63 kHz, fV 50/60Hz 
(NTSC,NTSC4.43,PAL,PAL60,PAL-N,PAL-M,SECAM)
BNC x 1, 1.0 Vp-p
BNC x 1, 1.0 Vp-p
Mini DIN 4-pin x 1
BNC x 5
D-sub HD 15-pin x 1
24-pin x1, DVI 1.0 compliant, HDCP compatible
D-sub 9-pin female x 2 (RS232C x 1, RS422 x 1)
D-sub 9-pin male x 1 (RS422 x 1)
M3 jack x1 for wired remote control
M3 jack x1 for link control
D-sub 9-pin female x 1 for external control (parallel)
RJ-45 (10 Base-T/100 Base-TX) x 1, compatible with PJLink™
±40˚ (±22˚ with the ET-D75LE5, ±28˚ with the ET-D75LE6)
Front/rear, ceiling/floor
3.0 m (9.9)
220-240 V, 15 A, 50 / 60 Hz
1,450 W (25 W in standby mode with fan stopped)
578 x 320 x 643 mm
(22-3/4 x 12-19/32 x 25-5/16) (without lens)
32 kg (70.5 lbs) without lens
0 -45 ˚C (32 -113 ˚F)
10-80% (no condensation)
Power cord, Wireless/wired remote control unit,
Batteries for remote control (3V AA battery x2)• AC 220-240V, 16A • AC 220-240V, 13A/15A
Notes on Projector Placement and Operation:The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions.1. Never place objects on top of the projector while it is operating.
2. Make sure there is an unobstructed space of 500 mm or more around the projectors exhaust openings.
3. Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. 
    When stacking projector units, be sure to provide the amount of space indicated below between them. 
    These space requirements also apply to installations where only one projector unit is operating at one time 
    and the other unit is used as a backup.
4. If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the projector 
    is between 0˚C and 35˚C. Also make sure the projectors intake and exhaust openings are not blocked. 
    Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings.
5. Because the ET-D75LE5 is a fixed short-throw lens, the lens shift function cannot be used with it.Operating the Projector Continuously:
1. If the projector is to be operated continuously 24 hours a day, use the multi-lamp optical systems 
    alternating lamp operation (lamp changer) function. The projector can be operated continuously 24 hours 
    a day in four-lamp operation mode,but it will automatically operate with three lamps for 8 hours of the 
    24 hours.
2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The projector uses a high-voltage mercury lamp that contains high internal pressure. 
    This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. 
    The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on 
    individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
unit: mm [inch]
NOTES ON USE
643 (25-5/16)
320 (12-19/32)578 (22-3/4)
Projection distance

 	

,	
	
	 8
.	
	
9 429:/
70
100
200
300
400
600ET-D75LE1 
1.4-1.8:1 
2.7 m / 9.0
3.9 m / 13.1
8.0 m / 26.5
12.1 m / 40.0
16.2 m / 53.4
24.4 m / 80.3max.
2.1 m / 6.9
3.0 m / 9.9
6.1 m / 19.9
9.2 m / 30.0
12.2 m / 40.1
18.4 m / 60.2min.ET-D75LE2 
1.8-2.8:14.2 m / 13.8
6.0 m / 19.9
12.2 m / 40.1
18.4 m / 60.3
24.5 m / 80.6
36.9 m / 121.1max.
2.9 m / 9.2
4.1 m / 13.3
8.2 m / 26.8
12.3 m / 40.3
16.4 m / 53.8
24.7 m / 80.8min.ET-D75LE3
2.8-4.6:17.0 m / 23.2
10.1 m / 33.4
20.4 m / 67.2
30.8 m / 101.0
41.1 m / 134.8
61.7 m / 202.4max.4.3 m / 13.9
6.1 m / 20.0
12.3 m / 40.2
18.5 m / 60.5
24.6 m / 80.7
37.0 m / 121.2min.ET-D75LE4
4.6-7.4:111.3 m / 37.3
16.2 m / 53.4
32.6 m / 107.2
49.0m / 160.9
65.4 m / 214.7
98.2 m / 322.2max.7.2 m / 23.3
10.2 m / 33.5
20.6 m / 67.3
30.9 m / 101.1
41.2 m / 134.9
61.8 m / 202.6min.ET-D75LE8
7.3-13.8:121.1 m / 69.3
30.3 m / 99.5
61.0 m / 200.3
91.7 m / 301.0
122.5 m / 401.8
183.9 m / 603.3max.11.1 m / 36.4
16.1 m / 52.6
32.5 m / 106.3
48.8 m / 160.1
65.2 m / 213.9
98.0 m / 321.4min.ET-D75LE6
0.9-1.1:1
1.6 m / 5.4
2.4 m / 7.8
4.8 m / 16.0
7.3 m / 24.1
9.8 m / 32.2
14.8 m / 48.5max.
1.4 m / 4.6
2.1 m / 6.7
4.1 m / 13.5
6.2 m / 20.2
8.3 m / 27.0
12.4 m / 40.6min.ET-D75LE5
0.7:1
1.0 m / 3.3
1.4 m / 4.9
3.0 m / 10.0
4.6 m / 15.2
—
—fixed
*The highland mode is for use at high altitudes. When using the unit at altitudes 
of 1,400 to 2,700 meters, the ambient temperature is 0 ˚C-40 ˚C.
[meters/feet]