Panasonic Pt Fw100ntea Projector Specifications

							PT-FW 10 0NT EA
LCD Projector
Long-Lasting 
Brightness 
						

							With its outstanding flexibility, the
PT-FW100NTEA makes an ideal
replacement for existing ceiling-
mounted systems. It requires little
maintenance after installation, so
total cost of ownership is low.
A Bright Choice for 
New Installations and
Replacement Use
Auto Rolling Filter (ARF) and Anti-Dust Design
A Micro Cut Filter, a high-efficiency electrostatic
filter, with superior dust-collecting performance
combines with Panasonic’s original Auto Rolling
Filter and anti-dust design to minimise brightness
loss due to dust accumulation. The Auto Rolling Filter periodically
winds the used section into the casing so that a fresh section of filter
is exposed. Thus, peak performance is maintained. In developing the
anti-dust design, Panasonic totally re-engineered the airflow path, from
intake to exhaust, to create a cabinet that hermetically seals off the
projector interior. This design and the Auto Rolling Filter team up to
keep the air inside the projector dust-free at all times.
Original Drive System for Optimal Lamp Performance
Lamps used in a projector require much higher precision than ordinary
household lamps. Panasonic employs a number of new technologies—
including a new drive system—that help maintain optimal lamp per-
formance for longer-lasting brightness.
ARF unit
ARF unit
Micro Cut Filter
A high-efficiency electrostatic filter in the air intake section
traps dust particles that are 1 microns* or larger. By cap-
turing approximately 7 times as much dust as our previous
filters, it guards against optical blocks and reduces the
penetration of dust into the interior to provide stable oper-
ation by preventing drops in brightness.
100
Dust
Dead
mitePollen
Mould
Bacteria
Virus
u p  t o  0.25 µm
(micrometer)
2.5– 20 µm 25– 50 µm 10
1
0.5
0.05
0.01
Size of particles
1
ADVANCEDTECHNOLOGIES THATMAINTAINHIGHBRIGHTNESS OVER ALONGERSERVICELIFE 
						

							The projector can also be set on
a shelf at the back of the room,
greatly simplifying installation.
Thanks to the wireless LAN
function, you can set up a sys-
tem using multiple PCs quickly
and easily.
The PT-FW100NTEA is a high-performance
LCD projector designed for use in fixed
installations. It combines Panasonic’s origi-
nal Auto Rolling Filter with an original
lamp drive system to deliver crisp, bright
images over extended periods of time. The
PT-FW100NTEA features 0.74-inch diago-
nal high-performance LCD panels that
enable large-screen projection of wide-
aspect image sources. Both wireless and
wired LAN functions respond to a variety
of applications. The PT-FW100NTEA also
offers outstanding installation flexibility,
with a 2x zoom lens and lens shift that
accommodate everything from permanent
ceiling-mounted use to simple placement
on a shelf. Whether you’re looking to
install a new system or considering a
replacement, Panasonic answers the call
for projectors that provide long-lasting
brightness, simple maintenance, and easy,
casual use even in fixed installations.
2 
						

							Daylight View 3 Technology: Enhanced Perception of
Brightness and Contrast*
The PT-FW100NTEA features Panasonic’s
Daylight View 3 technology, which uses an
adaptive low-pass filter to optimise
the dark parts of the image. This
makes images seem brighter and
higher in contrast, so they appear
crisp, vivid and easy to see even in
brightly lit rooms. Daylight View 3
also includes a built-in ambient
light sensor that automatically
detects room brightness and adjusts
operation accordingly.
Wide Images
The PT-FW100NTEA features wide-aspect LCD panels, which allow
native reproduction of WXGA (1,280 x 800) images from a computer.
This provides a visually powerful display of wide-screen images from
DVD sources, as well as wide-screen images from wide-aspect com-
puters, which will soon be the mainstream.
Side-by-Side Function
The PT-FW100NTEA can
simultaneously display
images from two sources
*
onto a single screen. For
example, you can display a
PC image on the right and
a video image on the left.
Taking advantage of the
PT-FW100NTEA’s wide-
screen projection, this
function gives you a host of new application possibilities to explore.
* This function is not effective for some source combinations. 
Easy Wireless Projection from Multiple PCs
With the PT-FW100NTEA’s wireless capability, you don’t need cables
to connect a PC. That means it’s
easy to bring in a laptop (with a
wireless LAN function) and deliver a
smooth, hassle-free presentation. You
can make the settings for wireless
connection quickly and easily using
Wireless Manager ME 4.5 software.
When the presentation is finished,
Wireless Manager restores the PC to
its previous LAN settings, so the PC is ready to reconnect to your
LAN. Wireless Manager functions include Live mode and Multi-Live
mode. In Live mode, the image projected is identical to the image
seen on the PC screen. In Multi-Live mode, you can wirelessly con-
nect with multiple PCs.
Simulated image with Daylight View 3
turned on. The brightness and contrast
over the entire image appear to be
enhanced, and details in shadow areas
are reproduced clearly. Simulated image with Daylight View 3
turned off. Overall contrast appears lower,
and images in dark areas are blackened.Virtual Remote
Control
The same graphics
used on the projectors
remote control can be
displayed on the PC
screen. This makes it
easy to operate the
projector right from the PC, without
having to use the remote control.
Ambient light 
sensor (ALS)
Daylight View 3 Concept
Daylight View 
circuit
LCD panels
Projector
3
Four-window style Index style
(Four thumbnails)Extended index style
(16 thumbnails)
The PT-FW100NTEA provides a host of convenient wireless functions, including Wireless
Prompter (Secondary Display Transmission), selective area transmission and a 16-window
index style that lets you project images from up to 16 PCs at the same time. Wireless
transmission is possible from one PC to a maximum of eight projectors at a time. A Wide Variety of Wireless Functions
* There is no actual change in the rated
brightness or contrast ratio.
When projecting images from a source with a wide aspect ratio onto a 4:3 screen, the pro-
jector reduces the image to use only 75% of the screen area. Also, wide-screen projection
makes it possible to display larger images where the room for the screen height is limited.
With the PT-FW100NTEA’s wide-aspect-ratio
capability, you can project two large 4:3
images side by side.
WIDESCREEN ANDWIRELESSFUNCTIONSADDVERSATILITY
Windows Vista™/Macintosh Compatibility
Wireless Manager ME 4.5 is Microsoft®Windows Vista™ compatible, and also allows
wireless projection (in Live mode only) from a Macintosh computer running Mac OS X
(v10.4 or later). 
						

							Wide 2x Zoom and Horizontal/Vertical Lens Shift Give
You More Installation Flexibility
The PT-FW100NTEA can project a 120-inch wide-aspect image from
any distance between 3.5 m (11.5 feet) and 7.1 m (23.1 feet). In
new installations, this lets you accommodate a wide range of room
sizes and shapes. When replacing existing projectors, the 2x zoom
greatly expands your installation flexibility.
Wired LAN: Web Browser Control/Monitoring, E-Mail
Message Alert
Anybody can operate the PT-FW100NTEA by remote control or monitor
its status over a LAN network, because it is all done using the com-
puter’s familiar web browser. Furthermore, the projector sends an e-
mail message to notify the operator when an error has occurred, or a
lamp needs to be replaced.
PJLink™compatibility
The LAN terminals support PJLink™class 1 connection. Control with
the same specifications is also possible when used in a multi-projec-
tor system with projectors of another brand.
Controlling and Monitoring Multiple Projectors
Panasonic’s original Multi Projector
Monitoring and Control* freeware
allows the user to control and
monitor multiple projectors via
LAN. When a problem occurs, an
alarm message is sent to the con-
trolling/monitoring PC.
* Available in June 2008. Please consult a sales
representative if necessary.
Direct Power Off
Because the cooling fan keeps operating until the lamp is cooled, you
can turn off the room’s main power without waiting for the projector
to cool down.
Easy Lamp Replacement from the Rear
For easier maintenance, you can replace the lamp
from the rear. The lamp is easily replaced even
after the projector is installed on the ceiling.
Abundant connection terminals
Designed for versatility, the PT-FW100NTEA comes equipped with a
host of connection terminals. The RS232C specifications are the same
as in previous Panasonic models, so replacement is quick and easy.
Easy-to-Use Remote Control with Laser Pointer
The supplied remote control
features a number of wireless
projection controls, including
Microsoft
®PowerPoint®page
up/down capability. The con-
trol range and distance have
been extended, and the but-
tons are now larger and easi-
er to use.
Other Valuable Features
• Anti-theft features: Security anchor, user password, control panel lock and text
superimposing  
• HDTV compatibility 
• Full compatibility with sRGB colour space for accurate colour reproduction (in natu-
ral mode)  
• Picture mode selection (standard/dynamic/natural) 
• Blackboard mode allows you to project images onto an ordinary classroom or conference room blackboard  
• Shutter function for image/sound muting 
• Selectable 17-language onscreen menu
Internet
LAN LAN
PC
PC
PC
PC PC
PT-FW100NTEA Remote Control
e-mail
e-mail
e-mail
7.1 m/23.3 feet 120-inch screen
3.5 m/11.5 feet
Equipped with two trans-
mitters for an extended
remote control range.
Security anchor
4
The front panel covers the lens to keep it clean from dust, and conceals the controls to
prevent accidental misoperation. It can be opened for easy access to controls even after
the projector is installed on the ceiling. With features like separate audio inputs for the computer 1 and computer\
 2 terminals, and
RCA pin jacks for the component signal input terminals, the PT-FW100NTEA has been
carefully designed for easy addition to existing systems, or convenient use as a permanent
installation projector.
Ecology-Conscious Design
Panasonic works from every angle to minimise environmental impact in the prod-
uct design, production and delivery processes, and in the performance of the
product itself over its life cycle. The PT-FW100NTEA Series reflects the following
ecological considerations.
•
Lead-free solder is used to mount components to the printed circuit boar\
ds.
• No halogenated flame retardants are used in the cabinet.
• No styrofoam is used in the packing materials.
• Lead-free glass is used for the lens.
CONVENIENTFEATURES FORFIXEDINSTALLATION 
						

							Please contact Panasonic or your dealer for a demonstration.
Projectors Global Web Site: http://panasonic.net/avc/projector
PT-FW100NTEA3-08OCT  Printed in Japan.All information included here is valid as of October 2008.
1: Meas urement, meas uring conditions , and method of notation all comply with I SO 21118 international s tandards.
2 : Input  signals  that exceed this  resolution will be converted to 1,280 x 800 pixels .
3 : Shift range is  limited during s imultaneous horizontal and vertical s hifting.
4 : Including protruding parts .
5 : Average value. May differ depending on model s.
6 : Operation range differs  depending on the environment.
Specifications
NOTES ON USE• The projector us es a high-voltage mercury lamp that contain s high internal pressure. This  lamp may
break, emitting a large  sound, or fail to illuminate, due to impact or extended u se. The length of
time that it take s for the lamp to break or fail to illuminate varie s greatly depending on individual
lamp characteri stics  and us age conditions .
• The brightness of the lamp will gradually decrea se with us e.
• The projector include s cons umable parts . The frequency of replacement for the lamp and other con-
s umable parts  will increase if the projector i s s ubjected to extended, continuou s u se. For details ,
pleas e cons ult a service repres entative.
• Do not in stall the projector in location s that are s ubject to exce ssive water, humidity, steam, or oily
s moke. Doing so may res ult in fire, malfunction, or electric  shock.
Replacement
lamp unit
ET-LAF100 Replacement 
filter unit
ET-RFF100Ceiling mount bracket
for high ceilings
ET-PKF100HCeiling mount bracket
for low ceiling
s
ET-PKF100S
319
53 213
432
115
9.5 124.5
309
70
85
12-9/16˝
2-2/32˝
8-3/8˝
17˝
4-17/32˝
3/8˝ 4-29/32˝
12-5/32˝
2-3/4˝
3-11/32˝
Projection Dist
ance (16:10)
unit: mm/inch
Project size
(diagonal) Height from the edge of screen
to centre of lens (H)
Min (wide) Projection distance (L)
Max (telephoto)
/
/
/
/
/
/
/
/
/ /
/
/
/
/
/
/
/
//
/
/
/
/
/
/
/
/ /
/
/
/
/
/
/
/
/
0.84 m
1.02 m
1.52 m
2.03 m
2.54 m
3.05 m
3.81 m
5.08 m
7.62 m –
1.2 m
1.7 m
2.3 m
2.9 m
3.5 m
4.4 m
5.9 m
8.9 m 1.9 m
2.3 m
3.5 m
4.7 m
5.9 m
7.1 m
8.8 m
11.8 m
17.7 m 0.24 m
0.29 m
0.43 m
0.57 m
0.71 m
0.86 m
1.07 m
1.43 m
2.14 m
0 –
0 –
0 –
0 –
0 –
0 –
0 –
0 –
0 –
33˝
40˝
60˝
80˝
100˝
120˝
150˝
200˝
300˝ –
3.8´
5.7´
7.6´
9.6´
11.5´
14.5´
19.3´
29.1´ 6.2´
7.6´
11.5´
15.3´
19.2´
23.1´
28.9´
38.6´
58.1´ 0 –
0 –
0 –
0 –
0 –
0 –
0 –
0 –
0 –0.8´
0.9´
1.4´
1.9´
2.3´
2.8´
3.5´
4.7´
7.0´
Options
DimensionsTo use wireless functions,
a PC is required th at meets the conditions given below:
O S: Micros oft®Windows®2000 Professional, Windows®XP Professional,
Windows®XP Home Edition, Window s Vis ta®,
Apple Mac OS  X 10.4 (Tiger) and OS  X 10.5* (Leopard)
*MacBook and MacBook Pro with the Intel Core 2 Duo processor only.NOTE: Some functions 
are not a va ila ble with Windows Vist a™  and Ma c OS X.
Web brows er: Windows®: Internet Explorer  6.0 or later, or Nets cape Communicator 7.0 or
later. Mac O S: Safari 2.0 or later
CPU: Window s
®: Intel®Pentium®III or higher, or other compatible proce ssor (1
G Hz or higher is  recommended).
Mac OS  X 10.4: 800-MHz or higher PowerPC G 4, or 1.8-GHz or higher
Intel
®Core™ processor.
Mac OS  X 10.5: MacBook and MacBook Pro with the Intel®Core™ 2 Duo
processor only.
Memory: 25 6 MB or more (512 MB or more is  recommended for Mac)
Free hard dis k space: 60 MB or more
CD-ROM drive: CD-ROM drive or DVD drive
Wireless LAN: IEEE 802.11b/g compatible (built-in wirele ss LAN sys tem or external IEEE
802.11b/g LAN card mus t be installed and running normally.) 
NOTE: Some IEEE 802.11g/b wireless LAN m ay not a llow connection to the projector.
Wired LAN connector: RJ-45 NOTE: Use Ca tegory 5e (or higher) c ables for 1000BASE-T connection.
Weights  and dimens ions s hown are approximate. Specifications  are subject to change without notice. Product
availability differs  depending on region and country. Thi s product may be s ubject to export control regulation s.
Intel and Pentium are regis tered trademarks of Intel Corporation. Micro soft, Windows  Vista and Windows  are
either regis tered trademarks  or trademarks of Microsoft Corp. in the United S tates and/or other countries . Apple,
Mac, Mac OS , Macintosh and Safari are trademarks  of Apple Inc., registered in the U.S. and other countries .All
other trademarks  are the property of their re spective trademark owners . Projection images s imulated.
Power supply
Power consumption
LCD pa nel
P anel size
Displa y method
Drive method
Pixels
Pixel configur ation
Lens
Throw ra tio
L a mp
Projection size
Colours
Brightness *
1Centre-to-corner uniformity *1Contrast ratio*1Resolution (RGB)
Sca nning frequency 
RGB
YP
BPR
S-Video/Video 
Optica l axis shift *
3Keystone correction ra nge
On-screen menu
Insta llation
Built-in spea kers
Termina ls
COMPUTER 1 IN
COMPUTER 2 IN/ COMPUTER 1 OUT
COMPONENT IN
VIDEO IN 
S-VIDEO IN 
AUDIO IN (COMPUTER 1) 
AUDIO IN (COMPUTER 2)
AUDIO IN (COMPONENT/ VIDEO/S-VIDEO)
AUDIO OUT
SERIAL
REMOTE
LAN
Power cord length
C abinet ma terial
Dimensions (W x H x D) *
4Weight*5Operating environment
Tempera ture
Humidity
Wireless LAN Sta nda rd
Opera tion ra nge*
6Infra structure mode
Ad-hoc mode
Wireless Remote Control Unit Power supply
Opera tion ra nge*
6
Dimensions (W x H x D)
Weight
Supplied Accessories 100–240 V AC, 50/
60 Hz
350 W (Approx. 4 W in  standby mode with fan s topped)
0.74˝ (18.8 mm) diagonal (1 6:10 as pect ratio)
Trans parent LCD panel (x 3, R/G /B)
Active matrix
1,024,000 (1,280 x 800) x 3, total of 3,072,000 pixel s
S tripe
Manual zoom (1:1–1:2), manual focus ,
F 1.7– 2.6 , f 21.6–43.0 mm
1.3–2.6 :1
250 W UHM lamp
33 – 300 inches /838 –7,620 mm diagonally (16 :10 aspect ratio)
Full colour (16 ,777,216 colours)
3,000 lumens
80%
400:1 (full on/full off)
1,280 x 800 pixels *
2
Horizontal: 15 –91 kHz, Vertical: 50 – 85 Hz
480i (525i): fH15.75 kHz; fV6 0 Hz
576 i (625i): fH15.6 3 kHz; fV50 Hz
480p (525p): fH31.5 kHz; fV6 0 Hz
576 p (6 25p): fH31.25 kHz; fV50 Hz
720/6 0p (750/6 0p): fH45 kHz; fV60 Hz
720/50p (750/50p): fH37.5 kHz; fV50 Hz
1080/6 0i (1125/6 0i): fH33.75 kHz; fV60 Hz
1080/50i (1125/50i): fH28.125 kHz; fV50Hz
NTS C, NTS C4.43, PAL-M, PAL6 0: fH15.75 kHz; fV60 Hz 
PAL, SECAM, PAL-N: fH15.6 3 kHz; fV50 Hz 
Vertical: ±51%, horizontal: ±24%
Vertical: ±30°
17 languages : English, French, German, Spanis h, Italian, Korean,
Russian, Chines e, Japanese,Swedis h, Norwegian, Danis h,
Portugues e, Polish, Hungarian, Czech, and Thai
Front/rear ceiling/de sk (menu s election)
4 cm (round), x 1, 3.0 W (monaural) output power
D-s ub HD 15-pin x 1
D-s ub HD 15-pin x 1 
(input/output  selectable us ing on-screen menu)
RCA pin x 3
RCA pin x 1
Mini DIN 4-pin x 1
M3 (s tereo) x 1
M3 (s tereo) x 1
RCA pin (L, R) x 1
M3 (s tereo) x 1 (variable)
D-s ub 9-pin x 1 (RS -232C)
D-s ub 9-pin x 1
RJ-45 x 1, 10BA SE-T/100BAS E-TX/1000BAS E-T
2 m (6 ´7˝) 
Molded plas tic (PC+ABS )
432 x 124.5 x 31 9 mm (17˝ x 4-29 /32˝ x 12-9/16˝)
Approx. 6.0 kg (13.2 lb s.)
0°– 40°C (32°–104°F)
20% – 80% (no condens a
 tion)
IEEE802.11b/g
Approx. 98´5˝ (30 m)
WPA-PS K (TKIP/AES ), 128/64-bit WEP
128/6 4-bit WEP
3 V DC (AA battery x 2)
Approx. 49 ´3˝ (15 m) when operated from directly in front of the
s ignal receptor
48 x 16 3 x 24.5 mm (1-7/8˝ x  6-13/32˝ x 31/32˝)
117 g (4.2 oz) (including batteries )
• Power cord
• Wireless remote control
• Batteries  for remote control
• Safety wire rope
• Wireless Manager ME 4.5
(CD-ROM)