Panasonic Sc Bft800 Operating Instructions

							Getting started 
21
VQT2Z56
	≥Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in 
the Setup menu. ( >40)
≥ You can redo these settings individually using “Network Settings”. ( >40)
≥ Do not use this device to connect to any wireless network for which 
you do not have usage rights.
During automatic search in a wireless network environment, wireless 
networks (SSID) for which you do not have usage rights may be displayed; 
however, using these networks may be regarded as illegal access.
≥ After performing network settings on this unit, the settings (encryption level, 
etc.) of the Wireless router (Access point) might change. When you have 
trouble getting online on your PC, perform the network settings of your PC 
in accordance with the settings of Wireless router (Access point).
≥ Please be aware that connecting to a network without encryption may 
result in the content of the communication being illegitimately viewed by a 
third party, or the leaking of data such as personal or secret information.
Occasionally, Panasonic may release updated firmware for this 
unit that may add or improve the way a feature operates. 
These updates are available free of charge.
This unit is capable of checking the firmware automatically 
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen 
is displayed.
To update the firmware
Press [START] >  select “To Others” >  [OK]  > select  
“Setup”  > [OK]  > select “General”  > [OK]  > select 
“Firmware Update” >  [OK]  > select “Update Now”
If downloading on this unit fails or this unit is not connected to 
the Internet, then you can download the latest firmware from 
the following website and burn it to a CD-R to update the 
firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit.  (> 41, “System 
Information”)
DO NOT DISCONNECT the unit from the AC power or perform 
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the 
unit’s display. Unit will restart and the following screen will be 
displayed.
	≥ Downloading will require several minutes. It may take longer or may not 
work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic 
Upd ate Check” to “Off”. ( >41)
STEP 6:
Reprogramming the 
remote control
When other Panasonic products respond to this 
remote control
Change “Remote Control” ( >41) on the main unit and the 
remote control (the two must match) if you place other 
Panasonic products close together and it responds to this 
remote control.
To change the code on the main unit.
1While stopped, press [START].
2Press [ 3,4] to select “To Others” and 
press [OK].
3Press [ 3,4] to select “Setup” and press 
[OK].
4Press [ 3,4] to select “General” and press 
[OK].
5Press [ 3,4] to select “Remote Control” 
and press [OK].
6Press [ 3,4] to select the code (1 or 2) and 
press [OK].
To change the code on the remote control.
1While pressing [OK]
Press and hold the number button (1 or 2), 
which has the same number you selected in 
the step 6 for more than 5 seconds.
2Press [OK].
Firmware updating
The latest firmware is available.
Please update firmware in Setup.
The firmware has been updated.
Current Installed Version:x.xx
RETURNOK
SCBFT800_VQT2Z56_eng.book  21 ページ  ２０１０年８月４日　水曜日　午後５時１０分
 
						

							22
VQT2Z56
Inserting or removing media
Inserting a disc
1Press [DISC < OPEN/CLOSE] to open the sliding door.
2 With the label of the disc facing towards you, tilt the 
disc into the disc tray under the sliding door.
3 Place the disc onto the spindle in the centre and then 
push the disc down until it clicks into place.
Removing a disc
1 Press [DISC < OPEN/CLOSE] to open the sliding door.
2 Hold the centre and the top right of the disc and pull the top 
right of the disc to unlock it from the spindle.
3 Tilt the disc so as not to touch the sliding door and remove 
the disc. ≥
When inserting a disc, ensure that the label of the disc is 
facing towards you.
≥ While the reading indicator is displayed, do not turn off the 
unit or remove the media. Such action may result in loss of 
the media’s contents.
≥ When removing the SD card, press on the centre of the card 
and pull it straight out.
≥
If the USB device is not recognized by the main unit, 
disconnect the USB device from the main unit and reconnect it.
≥ It may take some time to be recognized by the main unit.
∫ To switch sources
Press [BD/SD] or [EXT-IN] to select “BD/DVD”, “SD” or 
“USB”.
≥If media is inserted while the unit is stopped, the source 
switches automatically depending on the inserted media.
≥ Do not open or close the sliding door by hand.
	≥ Keep your hands away for the sliding door while it is opening or closing. Your hand or clothing’s, etc. might get caught inside  the door.
≥ Keep your fingers away from the sliding door when it is closing to avoid possible minor injuries.
≥ Do not leave the disc side of the sliding door open. Dirt may mount on the lens.
≥ Do not touch the lens or other parts of the laser pickup.
≥ During disc playback the sliding door will not open when [iPod  
						

							Getting started 
23
VQT2Z56
START menu
Major functions of this unit can be operated from the START 
menu.
1Press [START].
2Press [3,4 ] to select the item and press 
[OK].
e.g., BD-Video To exit the screen
Press [START].
∫
Selecting the source by the remote control
	≥Items to be displayed may vary with the media.
≥ When the selector is switched, it may take time to playback the selected 
video and/or audio.
Playback
Viewing Picture Play back the contents.
To p  M e n u (> 25)
Menu (> 25)
Network Home 
Network 
(DLNA)
(
> 36)
Internet 
Content Displays the Home screen of the 
VIERA CAST (
>35)
Input Selection Switches to each source
BD/DVD/CD
SD card
iPod
FM Radio
:
To enjoy the FM radio ( >29)
USB device
To enjoy sound from the TV 
( > 31)
ARC
*1:
When using an HDMI cable
(Available when using an ARC 
compatible TV)
DIGITAL IN
*1:
When using an Optical digital 
audio cable
To enjoy sound from other 
devices ( >31)
DIGITAL IN
*2:
When using an Optical digital 
audio cable
*1 “(TV)” is displayed next to items set  for TV AUDIO input.
*2 “(CABLE/SATELLITE)” is displayed  next to DIGITAL IN when set for 
CABLE/SATELLITE AUDIO input.
Sound(Equalizer) (> 24)
OKRETURN
Home Cinema
START
BD-Video
To Others Playback
Top Menu
Input Selection
Sound(Equalizer) Network
To  O t h e r s Playlists
:
You can play playlists created on 
DVD-VR.
Setup : (> 38)
Card Management : (> 26)
ButtonSource
BD/DVD or SD card (SD) ( >25)
iPod (IPOD) ( >33)
FM Radio (FM) ( >29)
USB device (USB) ( >25)
To enjoy sound from the TV ( >31)
ARC
*1
DIGITAL IN*1 (D-IN)
To enjoy sound from other devices ( >31)
DIGITAL IN
*2 (D-IN)*1 “(TV)” is displayed next to items set for TV AUDIO  input.
*2 “(CABLE/SATELLITE)” is displayed next to  DIGITAL IN when set for CABLE/SATELLITE 
AUDIO input.
BD/SD
iPod
EXT-INRADIO
SCBFT800_VQT2Z56_eng.book  23 ページ  ２０１０年８月４日　水曜日　午後５時１０分
 
						

							24
VQT2Z56
Enjoying sound effects 
from all speakers
Press [SURROUND] several times to select the 
effect.
7.1CH VIRTUAL SURROUND
You can enjoy 5.1/6.1/7.1-channel surround-like effect 
using 2.1-channel speakers.
2CH STEREO
You can play any source in stereo without the surround 
sound effect.
DOLBY VIRTUAL SPEAKER REFERENCE
You can enjoy a surround sound effect similar to 5.1 ch 
(Dolby Digital or DTS) with any audio source, using the 
included front speakers and the active subwoofer. You can 
also enjoy a surround sound effect with stereo source such 
as CDs.
DOLBY VIRTUAL SPEAKER WIDE
This mode widens the acoustic field of the front speakers.
∫Adjusting speaker level during play
1 Press and hold [ jCH SELECT] to activate the speaker 
setting mode.
2 Press [ jCH SELECT] several times to select the speaker.
Each time you press the button:
L R: Front speaker (left and right: only the balance is adjustable.)
≥Press [ 2,1] to adjust the balance of the front 
speakers.
SW: Active subwoofer ≥Press [ 3] (increase) or [ 4] (decrease) to adjust the 
speaker level of the active subwoofer.
s 6 dB to r 6 dB
∫Changing the sound modes
1 Press [SOUND] several times to select the mode.
≥The selected mode will only be displayed on the main 
unit.
2 While the selected mode is displayed
Press [ 2,1] and select the desired setting.
EQUALIZER You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUBWOOFER LEVEL
You can adjust the amount of bass.
1 (Weakest effect) to  4 (Strongest effect)
≥The setting you make is retained, and recalled every 
time you play the same type of source.
H.BASS You can enhance low-frequency sound so that heavy 
bass sound can be heard clearly, even if the acoustics of 
your room are not optimal.
≥The setting you make is retained, and recalled every 
time you play the same type of source.
WHISPER-MODE SURROUND You can enhance the surround effect for low volume 
sound. (Convenient for late night viewing.)
CLEAR-MODE DIALOG You can make the dialogue stand out from the 
background noise and also hear sound as if it is coming 
from the centre of the TV.
DUAL  (“D-IN”, “ARC” only)
You can select to suit the type of audio on the main unit.
M1
M2
M1 rM2  (stereo audio)
(Only works with Dolby Dual Mono)
≥“M1” or “M2” is not available if “On” is selected in 
“Digital Audio Input”. ( >39)
AUTO STEREO  (“FM” only)
If noise is excessive, you can select the type of FM radio 
audio. Depending on the broadcast system, stereo or 
monaural will be selected.
MONO
The sound becomes monaural.
	≥ The sound effects/modes may not be available or have no effect with some 
sources.
≥ You may experience a reduction in sound quality when these sound 
effects/modes are used with some sources. If this occurs, turn the sound 
effects/modes off.
Enjoying surround sound 
effects
      L R  SW
SCBFT800_VQT2Z56_eng.book  24 ページ  ２０１０年８月４日　水曜日　午後５時１０分
 
						

							Getting started 
Playback
25
VQT2Z56
Playback
Playing video contents
[BD]  [DVD]  [CD] [SD]  [USB]
Preparation
Turn on the television and select the appropriate video input on 
the television.
1Press [ Í] to turn on the unit.
2Insert the media.
Play starts.
≥If the menu is displayed, press [3 ,4 ,2, 1] to select 
the item and press [OK].
≥ When a message screen is displayed while playing back 
3D compatible video software, play back in accordance 
with the instructions.
≥ If play does not start, press [ 1PLAY].
∫ To show menus
You can display Top Menu, DIRECT NAVIGATOR or Pop-up 
Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP 
MENU].
≥Press [ 3,4,2 ,1] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [OPTION] and 
selecting “Pop-up Menu”.
∫ To show the status messages
While playing, press [STATUS].
The status messages give you information about what is 
currently being played. Each time you press [STATUS], the 
information displayed will change.
	≥Signal from PAL discs is output as PAL. Signal from NTSC discs is output 
as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in “NTSC 
Contents Output” for NTSC discs. ( >38)
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press 
[∫ STOP] when you have finished playback to protect the unit’s motor, 
your television screen and so on.
≥ Depending on media and contents, the display may change or may not 
appear.
≥ DivX: Successive play is not possible.
≥ When a menu is displayed at the time a 1080/60p (1920 k1080/60 
progressive) video recorded by a Panasonic digital high-definition video 
camera is played back, select “Play Video (AVCHD)”.
≥ It is not possible to playback AVCHD and MPEG2 video which have been 
dragged and dropped, copied and pasted to the media.
These functions may not work depending on the media and 
contents.
Press [ ∫STOP].
The stopped position is memorised.
Resume play function
Press [ 1PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or you press 
[∫ STOP] several times to display “STOP” on the unit’s 
display.
≥ On BD-Video discs including BD-J ( >49), the resume 
play function does not work.
Press [ ;PAUSE].
≥ Press [ ;PAUSE] again or [ 1PLAY] to restart play.
Search
While playing, press [SEARCH 6] or [SEARCH 5].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH6 ] or [SEARCH5].
≥ BD-Video and AVCHD: Forward direction [SEARCH 5] 
only.
The speed increases up to 5 steps.
≥ Press [ 1PLAY] to revert to normal playback speed.
While playing or paused, press [SKIP :] or [SKIP 9].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
≥ DivX: Backward direction [SKIP :] only.
While paused, press [ 2] (2; ) or [1]  (;1).
≥ Press and hold to change in succession forward or 
backward.
≥ Press [ 1PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [ 1] (;1 ) only.
PLAYBD-Video T1     C1     0:05.140:20.52
Current position
e.g. BD-Video
To t a l  t i m e
Elapsed time in the title
T: Title, C: Chapter, PL: Playlist
Other operations during play
St o p
Pause
Search/Slow-motion
Skip
Frame-by-frame
SCBFT800_VQT2Z56_eng.book  25 ページ  ２０１０年８月４日　水曜日　午後５時１０分
 
						

							26
VQT2Z56
1Press [OPTION].
2Select an item and press [OK].
≥Depending on the played contents if you perform “Screen 
Aspect”, there may be no effect.
≥ When “TV Aspect” ( >39) is set to “4:3” or “4:3 Letterbox”, 
the “Zoom” effect in “Screen Aspect” is disabled.
	≥ Depending on the media and contents, displayed items are different.
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as 
picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you to 
enjoy more functions such as subtitles, exclusive images and 
online games by connecting this unit to the Internet.
≥The usable functions and the operating method may vary 
with each disc, please refer to the instructions on the disc 
and/or visit their website.
To turn on/off secondary video
1 Press [DISPLAY].
2 Press [ 3,4] to select the “Disc” menu and press [ 1].
3Press [3,4] to select the “Signal Type” menu and press [OK].
4Press [ 3,4] to select the “Video” under “Secondary 
Video” menu and press [ 1].
5 Press [ 3,4] to select the “On” or “Off”.
6 Press [RETURN] to exit.
A Secondary video
B Primary video To turn on/off secondary audio
1
Press [DISPLAY].
2 Press [ 3,4] to select the “Disc” menu and press [ 1].
3 Press [ 3,4] to select the “Signal Type” menu and press 
[OK].
4 Press [ 3,4] to select the “Soundtrack” under “Secondary 
Video” menu and press [ 1].
5 Press [ 3,4] to select the “On” or “Off”.
When “On” is selected, press [ 1] and then press [3,4] to 
select the language.
6 Press [RETURN] to exit.
	≥During search/slow-motion or frame-by-frame, only the primary video is 
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”, 
secondary audio will not be played ( >39).
Some BD-Live content available on the Blu-ray discs may 
require an Internet account to be created in order to access the 
BD-Live content. Follow the screen display or instruction 
manual of the disc for information on acquiring an account.
1Connect to the network. ( >17)
2Insert an SD card (with 1 GB or more free space).
SD card is used as the local storage ( >49).
3Insert the disc.
∫ Deleting data/Formatting SD cards
There are various functions in BD-Video that you can enjoy by 
copying data to the SD card (Local Storage). If you no longer 
need data recorded on the SD card, you can delete data with 
the following operation.
1 Insert an SD card.
2 Press [START].
3 Press [ 3,4] to select “To Others” and press [OK].
4 Press [ 3,4] to select “Card Management” and press 
[OK].
5 Press [ 3,4] to select “BD-Video Data Erase” or “Format 
SD Card” and press [OK].
6 Press [ 2,1] to select “Yes” and press [OK].
7 Press [ 2,1] to select “Start” and press [OK].
	≥To use the above functions, it is recommended that you format the card on 
this unit. If the SD card you use is formatted, all data on the card will be 
erased. It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs 
(> 38).
≥ When discs supporting BD-Live are played back, the player or disc IDs 
may be sent to the content provider via the Internet.
Useful functions
While DIRECT NAVIGATOR screen is displayed
PropertiesTo display the titles properties (recording date, etc.).
Chapter ViewTo select the chapter.
To  P i c t u r ePlaying still pictures ( >28).
FolderTo switch to another folder.
View TitlesTo select the title.
While playing
Screen 
AspectWhen black bars are shown at the top and 
bottom or left and right sides of the screen, 
you can enlarge the image to fill the screen.
Top MenuTo display Top Menu.
Pop-up MenuTo display Pop-up Menu.
MenuTo display Menu.
Enjoying BD-Live or 
BONUSVIEW in BD-Video
Playing picture-in-picture


Enjoying BD-Live discs with 
Internet
Card Management No. of Files    6
Free space    300 MB
SD CARD
Format this SD Card.OK
RETURN
BD-Video Data Erase
Format SD Card
SCBFT800_VQT2Z56_eng.book  26 ページ  ２０１０年８月４日　水曜日　午後５時１０分
 
						

							Playback
27
VQT2Z56
ABOUT DIVX PLUSTM HD:
DivX® is a digital video format created by DivX, Inc. This is an 
official DivX Certified® device that plays DivX video, including 
DivX PlusTM HD video (H.264/.MKV) up to 1080p and premium 
content. Visit www.divx.com for more information and software 
tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified
® device must be registered in order to play 
DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD section 
in the device setup menu.
Go to vod.divx.com with this code to complete the registration 
process and learn more about DivX VOD.
≥ Video images of the DivX VOD contents stored on USB 
device can be output only through the HDMI output terminal.
Display the unit’s registration code.
(> 41, “DivX Registration” in “General”)
A 10 alphanumeric characters
≥ After playing DivX VOD content for the first time, the 
registration code is not displayed.
≥ If you purchase DivX VOD content using a registration code 
different from this unit’s code, you will not be able to play this 
content.
Cancel the unit’s registration.
(> 41, “DivX Registration” in “General”)
Press [ 2,1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in 
www.divx.com.
Regarding DivX VOD content that can only be played a set 
number of times
Some DivX VOD contents can only be played a set number of 
times. When you play this content, the number of times already 
played and initially playable number of times is displayed.
≥ The remaining number of plays decreases each time a 
programme is played. However, when playing from the point 
where play was previously stopped, the remaining number of 
plays does not decrease due to the resume play function.
∫ Displaying subtitle text
You can display subtitle text on the DivX video disc on this unit.
This function has no relation to the subtitles specified in DivX 
standard specifications and has no clear standard. The 
operation might be different or it may not operate properly 
depending on the way the file was made or the state of this unit 
(playing, stopped, etc.).
Set “Subtitle” in “Disc” ( >35)
	≥DivX video files that do not display “Text” do not contain subtitle text.
≥ If the subtitles text is not displayed correctly, try changing the language 
settings. ( >38)
≥ You may not display subtitle text depending on a file.
Enjoying Blu-ray 3DTM 
video
[BD]
You can enjoy powerful videos with realistic sensations of the 
Blu-ray 3D
TM compatible video software by connecting this unit 
with a High Speed HDMI Cable to a 3D compatible TV.
When playing back a disc that has recorded titles with a 2 
screen structure (Side by side) etc. which can be enjoyed in 
3D, it will playback in accordance with the 3D settings on the 
TV, regardless of the settings mentioned to the table below.
≥ Screen displays, such as Playback menu, will not display 
correctly.
Preparation
Connect 3D compatible TV to an HDMI AV OUT terminal of 
this unit using a High Speed HDMI Cable, and select HDMI 
video input mode on the TV. ( >14 , 15)
≥ Perform the necessary preparations for the TV.
Method of playback is the same as normal disc playback. 
(> 25)
≥ Playback following the instructions displayed on the screen.
Perform the following settings as necessary.
	≥ Please refrain from viewing 3D images if you do not feel well or are 
experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other discomfort 
while viewing 3D images, discontinue use and rest your eyes.
≥ Depending on the connected TV, the video being played back might switch 
to 2D video due to changes in resolution etc. Check the 3D setting on the 
TV.
≥ 3D video might not output the way it is set in “HDMI Video Format” or “24p 
Output” ( >40).
Regarding DivX
DivX Registration
You must register this unit to play
protected DivX videos.
The registration code is necessary to
register this unit.
Registration Code: XXXXXXXXXXPlease register at  www.divx.com/vod/
3D settings
Playback 
method for 3D 
discIt is also possible to playback 3D discs 
in 2D (conventional video). ( >38)
3D Type
If you cannot play back in 3D, change 
the settings as required by the 
connected TV format. ( >39)
≥ Change the settings for 3D on the 
TV also when “Side by side” is 
selected.
3D Playback 
MessageHide the 3D viewing warning screen. 
(> 38)
Graphic Display 
LevelAdjust the pop-up position for the 
playback menu or message screen 
etc. ( >36)
The illustration is an image.
SCBFT800_VQT2Z56_eng.book  27 ページ  ２０１０年８月４日　水曜日　午後５時１０分
 
						

							28
VQT2Z56
Playing still pictures
[BD] [DVD]  [CD]  [SD]  [USB]
(BD-RE, DVD-RAM/-R/-R DL, CD-R/RW, SD Card, 
USB device)
1Insert a disc, SD card or USB device.
If the menu is displayed, press [ 3,4 ] to select the item 
and press [OK].
2BD-RE, DVD-RAM
Press [ 3,4, 2,1] to select the album and 
press [OK].
3Press [ 3,4,2,1 ] to select the still 
picture and press [OK].
Press [ 2,1] to display the previous or next still picture.
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].
∫ To show the picture properties
While playing, press [STATUS] twice.
To exit the screen
Press [STATUS].
1Press [OPTION].
2Select an item, then press [OK].
	≥Depending on the media and contents, displayed items are different.
≥ When a still picture with large number of pixels is played, the display 
interval may become longer. Even if the setting is changed, the display 
interval may not become shorter.
≥ When a music CD, a USB device with MP3 recorded and an iPod/iPhone 
are inserted/connected to this unit, iPod/iPhone has a priority to be played 
back as background music.

 To t a l  8
106_DVD
 Total 132006 9 12
VideoPicture
Press OK to go to Picture View.
Previous Next
Slideshow
Video Picture Page  02/02
DIRECT NAVIGATORAlbum ViewDVD-RAM(VR)
OPTIONOKRETURN
OPTION
DIRECT NAVIGATORPicture ViewDVD-RAM(VR)Video
Picture
PlayRETURN
2006 9 12
Page  001/001
0001
0005
0009 0006 0007 0008 0002 0003 0004
Date     11.12.2007                    Total        3/9
e.g. JPEG on DVD-RAM
Shooting date
Useful functions
While “Album View” or “Picture View” screen is displayed
Start 
SlideshowYou can display still pictures one by one at a 
constant interval.
Slideshow 
Setting
Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Soundtrack
Music files on an iPod/iPhone or a music CD 
or USB device can be played back as 
background music during the slideshow.
Soundtrack Folder
A folder to play back can be selected when a 
USB device with recorded MP3 is connected 
to this unit.
Press [3,4, 2,1] to select “Set” and 
press [OK].
Select 
FolderTo switch to another higher folder.
≥ Only if there is a multiple number of higher 
folders recognizable.
FolderTo select the still pictures in another folder.
To  V i d e oPlaying video contents ( >25).
To  a l b u m  
viewTo display album view.
While playing (except for slideshow)
Rotate 
RIGHT
Rotate the still picture.
Rotate LEFT
Zoom out
Reduce the still picture.
≥ This function is only available for 
small-sized still pictures.
Zoom inCancel “Zoom out”.
SCBFT800_VQT2Z56_eng.book  28 ページ  ２０１０年８月４日　水曜日　午後５時１０分
 
						

							RadioPlayback
29
VQT2Z56
Playing music
[DVD] [CD]  [USB]
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
1Insert a disc or USB device.
If the menu is displayed, press [ 3,4] to select the item 
and press [OK].
2Press [ 3,4 ] to select the track and press 
[OK].
∫ Playing a track in another folder
1 While the “Music list” is displayed
Press [OPTION].
2 Press [ 3,4] to select “Select Folder” and press [OK].
	≥You cannot select folders that contain no compatible tracks.
Radio
Listening to the Radio
Up to 30 stations can be set.
1Press [RADIO] to select “FM”.
2Press [STATUS] to select the position to 
start the auto preset search.
LOWEST:
To begin auto preset with the lowest frequency (FM87.50).
CURRENT:
To begin auto preset with the current frequency.*
*To change the frequency, refer to “Presetting stations 
manually”.
3Press and hold [OK].
Release the button when “AUTO” is displayed.
The tuner starts to preset all the stations it can receive into 
the channels in ascending order.
	≥ “SET OK” is displayed when the stations are set, and the radio tunes to the 
last preset station.
≥ “ERROR” is displayed when automatic presetting is unsuccessful. Preset 
the stations manually.
Preparation
Select a radio broadcast.
1 Press [RADIO] to select “FM”.
2 Press [SEARCH 6] or [SEARCH 5] to select the 
frequency.
≥ To start automatic tuning, press and hold [SEARCH 6], [SEARCH 5] 
until the frequency starts scrolling. Tuning stops when a station is found.
1While listening to the radio broadcast
Press [OK].
2While “P” is flashing on the display
Press the number buttons to select a 
channel.
To select a 1-digit number
e.g., 1: [1] B[OK].
To select a 2-digit number
e.g., 12: [1] B[2]
	≥A station previously stored is overwritten when another station is stored in 
the same channel preset.
 0.09  4.30
01
02
03
04
05
DIRECT NAVIGATORMusic list
CD
No. Track Name Play Time Track1
Track1 4min30sec 
3min41sec 
4min30sec 
3min11sec 
5min  2sec 
Track2
5 Tracks / Total Play Time 20min54sec
Track3
Track4
Track5
Play
RETURN
“ ” indicates the track currently playing.
Presetting stations 
automatically
Presetting stations manually
SCBFT800_VQT2Z56_eng.book  29 ページ  ２０１０年８月４日　水曜日　午後５時１０分
 
						

							30
VQT2Z56
1Press [RADIO] to select “FM”.
2Press the number buttons to select the 
channel.
To select a 1-digit number
e.g., 1: [1]B[OK].
To select a 2-digit number
e.g., 12: [1] B[2].
Alternatively, press [ W,X ] or [2 ,1].
[For[the[United[Kingdom[and[Republic[of[Ireland[
If the station you are listening to is transmitting RDS signals, 
“RDS” will light up on the display.
While listening to the radio broadcast
Press [DISPLAY] to display the text data.
PS: Programme service
PTY: Programme type
OFF : Frequency display
* M.O.R. M=Middle of the road music
∫ Display on the main unit
TUNED/STEREO:
Displayed when receiving stereo broadcasting
TUNED:
Displayed when receiving monaural broadcasting or monaural 
sound is selected.
TV
Enjoying TV with unit’s 
speakers
Preparation
Turn on your TV and select the appropriate audio input mode 
[ARC,  D-IN] to suit the connections to this unit. ( >23)
You can enhance stereo sources with surround sound effect.
Press [SURROUND] several times to select the 
effect.
For more detailed information on this operation, please refer to 
the “Enjoying surround sound effects” section on page 24.
You can adjust the mode depending on the source or situation.
1Press [SOUND] several times to select the 
mode.
2While the selected mode is displayed on the unit’s 
display
Press [ 2,1 ] and select the desired setting.
For more detailed information on this operation, please refer to 
the “Changing the sound modes” section on page 24.
You can make the dialogue stand out from the background 
noise and also hear sound as if it is coming from the centre of 
the TV.
1Press [SOUND] several times to select 
“CLEAR-MODE DIALOG”.
2While the selected mode is displayed on the unit’s 
display
Press [ 2,1 ] and select “ON” or “OFF”.
Listening/confirming the preset 
channels
RDS broadcasting
PTY displays
NEWS VARIED FINANCE COUNTRY
AFFAIRS POP M CHILDREN NATIONAL INFO ROCK M SOCIAL A OLDIES
SPORT M.O.R. M* RELIGION FOLK M
EDUCATE LIGHT M PHONE IN DOCUMENT DRAMA CLASSICS TRAVEL TEST
CULTURE OTHER M LEISURE ALARM SCIENCE WEATHER JAZZ
∫ If noise is excessive
1 Press [SOUND] several times to select “AUTO 
STEREO”.
2 While the selected mode is displayed on the unit’s 
display
Press [ 2,1] and select “MONO”.
The sound becomes monaural.
Select “AUTO STEREO” in step 2 to cancel the mode. 
Depending on the broadcast system, stereo or monaural will 
be selected.
“MONO” is also cancelled when you change the frequency.
≥ This setting can be preset for each broadcasting station. 
Surround sound effects
Sound modes
Clear-mode Dialog
SCBFT800_VQT2Z56_eng.book  30 ページ  ２０１０年８月４日　水曜日　午後５時１０分