Panasonic Sc Btx70 Operating Instructions

							21
RQT9479
Useful functions during still picture play
Start Slideshow
You can display still pictures one by one at a constant interval.
BD-RE, DVD-RAM1While the “Album View” screen is displayed
Press [ 3,4,2,1] to select the album and press [SUB MENU].
2 Press [ 3,4] to select “Start Slideshow” and press [OK].
≥ You can also start slideshow by pressing [ 1PLAY] after selecting 
the album.
DVD-R/R DL, CD-R/RW, SD card1 While the “Picture View” screen is displayed
Press [SUB MENU].
2 Press [ 3,4] to select “Start Slideshow” and press [OK].
To stop slideshow
Press [ ∫STOP].
Slideshow settings
After performing step  1 in “Start Slideshow” above,
2 Press [ 3,4] to select “Slideshow Settings” and press [OK].
3 To change the display interval
Press [ 3,4] to select “Display interval” and press [ 2,1 ] to 
select the interval (“Normal”, “Long” or “Short”).
≥ When a still picture with a large number of pixels is played, the 
display interval may become longer. Even if the setting is 
changed, the display interval may not become shorter.
To set display method
Press [ 3,4] to select “Transition Effect” and press [ 2,1 ] to 
select “Fade”, “Motion” or “Random”.
“Fade”: Pictures are changed by fading out and fading in.
“Motion”: Pictures are changed by fading out and fading in,  while it is enlarged, reduced, or moved up or down.
“Random”: In addition to “Motion”, pictures are changed by  various methods.
To repeat slideshow
Press [ 3,4] to select “Repeat Play” and press [ 2,1] to select 
“On” or “Off”.
To listen to Background Music
Music files on an iPod or a music CD can be played back as 
Background music during the slideshow.
Press [ 3,4] to select “Soundtrack” and press [ 2,1] to select 
“On” or “Off”.
≥ You cannot search or skip the music.
≥ When the slideshow stops, playback of the music also stops.
≥ Playback of the music files will be in the following order:
[CD] : Order of “Music list” display in repeat mode.
iPod: The music files will be played back in repeat mode.
≥ When both a music CD and an iPod is inserted to this unit, the 
iPod has a priority to be played back as Background music.
4 Press [ 3,4,2 ,1] to select “Set” and press [OK].
Rotate
1 While playing (except for slideshows)
Press [SUB MENU].
2 Press [ 3,4] to select “Rotate Right” or “Rotate Left” and press 
[OK].
≥ The rotation information will be stored until the unit is turned off or 
the media is removed.
Zoom out
This function is only available for small-sized still pictures.
1 While playing (except for slideshows)
Press [SUB MENU].
2 Press [ 3,4] to select “Zoom out” and press [OK].
≥ To cancel “Zoom out”, press [ 3,4 ] to select “Zoom in” in step  2 
and press [OK].
≥ The zoom-out information will not be stored.
To select the still pictures in another folder
BD-RE, DVD-RAMTo switch to another higher folder
(Only if there is a multiple number of higher folders recognizable)
1 While the “Album View” screen is displayed
Press [SUB MENU].
2 Press [ 3,4] to select “Select Root folder” and press [OK].
3 Press [ 2,1] to select the higher folder and press [OK].
DVD-R/R DL, CD-R/RW1 While the “Picture View” screen is displayed
Press [SUB MENU].
2 Press [ 3,4] to select “Select Folder” and press [OK].
3 Press [ 3,4] to select a folder and press [OK].
The “Picture View” screen for the folder appears.
To show the picture properties
While playing
Press [STATUS] twice.
To exit, press [STATUS].
\JPEG\DCIM001
OK
RETURN
Select Root folder
Change the Album folder to be accessed.
Press [OK] to confirm
PicturesFolder selection
CD(JPEG)
    001 
        002 
        003 
        004 
        005 
        006  
        007 
        
008        009 
        010 
      
    103 
        104 
        105
021216_0026   F  2/25
OK RETURN
Photo     11.12.2009                    Total        3/9
e.g., JPEG on DVD-RAM
Shooting date
Playback
e.g.
BTX70PP_eng.book  21 ページ  ２００９年６月２４日　水曜日　午後３時４２分
 
						

							22
RQT9479
Playing music
[CD] [MP3]
You can generally play any available music CD or MP3 file recorded onto a DVD-R/R DL and CD-R/RW.
(About structure of folders  D 41, “Structure of folders that can play back on this unit”)
1 Insert a disc. ( >16)
≥If a media containing data in different file 
formats is inserted, the file selection 
menu may be displayed. Press [ 3,4 ] to 
select “Play Music (MP3)” and press 
[OK].
2 Press [ 3,4] to select the track and press [OK].Play starts on the selected track.
To switch from other menus to MP3 menu
(If the media contains data in different file 
formats)
1) Press [START].
2) Press [ 3,4] to select “Menu” and press 
[OK].
3) Press [ 3,4] to select “Play Music (MP3)” 
and press [OK].
≥ You can use search and skip functions. ( >17)
≥ When the “Screen Saver Function” is set to 
“On” (> 35), the screen switches to Screen 
Saver mode if there is no operation for 5 
minutes after starting playback. (Playback 
continues.)SLPe.g.
CD
Select an action or press [RETURN].OK
RETURNSUB
MENU
Play Pictures (JPEG)Play Music (MP3)
 0.09  4.30
01
02
03
04
05
DIRECT NAVIGATORMusic list
CD
No. Track Name Play Time Track1
Track1 4min30sec 
3min41sec 
4min30sec 
3min11sec 
5min  2sec 
Track25 Tracks / Total Play Time 20min54sec
Track3
Track4
Track5
Play RETURN“ ” indicates the track currently playing.
e.g.,  [CD]
TIPS
[MP3] Playing a track in another folder
1 While the “Music list” is displayed
Press [SUB MENU], press [ 3,4] to select “Select Folder” and press [OK].
2 Press [ 3,4] to select a folder and press [OK].
The “Music list” for the folder appears.≥ You cannot select folders that contain no 
compatible tracks.
To return to the previous screen
Press [RETURN].
DIRECT NAVIGATORSelect Folder
CD(MP3)
    001 My favorite
        002 Brazilian pops
        003 Chinese pops
        004 Czech pops
        005 Hungarian pops
        006 Liner notes
        007 Japanese pops
        
008 Mexican pops        009 Philippine pops
        010 Swedish pops
            011 Momoko
    012 Standard number
        013 Piano solo
        014Vocal
MP3 music   F  8/25
OK RETURN
 
Selected folder No. /Total folders
If the folder has no track, “– –” is 
displayed as folder number.
NOTE
TIPS
Playing music continuously even after turning off power to the 
TV≥ Sound may be discontinued for several seconds 
when the power to the TV is turned off.
When the unit is connected to a Panasonic TV (VIERA) that supports HDAVI 
Control 2 or later and another device supports VIERA Link, the unit is turned 
off if the power to the TV is turned off, since “Power off link” ( >26) operates.
The following operations make it possible to keep the power of the unit ON 
and to play music continuously. Set “Power Off Link” to “Video” ( >36).
NOTE
Playback
BTX70PP_eng.book  22 ページ  ２００９年６月２４日　水曜日　午後３時４２分
 
						

							23
RQT9479
Listening to the Radio
Up to 30 stations can be set.
1Press [RADIO] to select “FM”.Main unit: Press [RADIO/EXT-IN].2Press [STATUS] to select the position to start the 
auto preset search.
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest frequency.
(FM: 87.9 or 87.5)
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Manual tuning”. ( Bright)
3 Press and hold [OK].
Release the button when “AUTO” is 
displayed.
The tuner starts to preset all the stations it 
can receive into the channels in ascending 
order.
≥ “SET OK” is displayed when the stations are set, and the radio tunes 
to the last preset station.
≥ “ERROR” is displayed when automatic presetting is unsuccessful. 
Preset the stations manually. ( Bright)
1 Press [RADIO] to select “FM”.
2 Press the numbered buttons to select the 
channel.
To select a 1-digit number
e.g., 1: [1] >[OK].
To select a 2-digit number
e.g., 12: [1]  B [2]
Alternatively, press [ X,W] or [ 2,1 ].
When a stereo FM broadcast is being received, 
“ST” lights in the display.
≥ The FM setting is also shown on the TV display.
∫ If noise is excessiveWhen FM is selected
Press [AUDIO] to display “MONO”.
Press the button again to cancel the 
mode.
≥The mode is also canceled when you change the frequency.
≥ This setting can be preset for each broadcasting station. When 
“MONO” appears, follow procedures  1 and  2 in “Presetting stations 
manually”. ( >below)
1 Press [RADIO] to select “FM”.
2 Press [SEARCH 6] or [SEARCH 5] to select 
the frequency.
≥ Main unit:
Press [:/ 6 , 5 /9 ] to select the frequency.
≥ When a radio broadcast is being 
received, “T” lights in the display.
≥ To start automatic tuning, press 
and hold [SEARCH 6] or 
[SEARCH5 ] (main unit: [:/6 , 5 /9 ]) until the 
frequency starts scrolling. 
Tuning stops when a station is found.
∫ Presetting stations manuallyUp to 30 stations can be set.
1 While listening to the radio broadcast
Press [OK].
2 While “P” is flashing on the display
Press the numbered buttons to select a channel.
To select a 1-digit number
e.g., 1: [1] >[OK].
To select a 2-digit number
e.g., 12: [1]  B [2]
A station previously stored is ov erwritten when another station is 
stored in the same channel preset.
FM frequency step
Main unit:
The factory setting is set to 0.2 MHz, it can be changed to receive broadcasts allocated in 0.1 MHz. You may need to change this  setting 
if the tuner seems to skip over the correct frequency for stations in your area.
1 Press [RADIO/EXT-IN] to select “FM”.
2 Press and hold [RADIO/EXT-IN].
After a few seconds the display changes to show the current lowe st frequency. Continue to hold the button down. The lowest frequency changes 
and the step is changed.
To return to the original settings, repeat steps  1 and  2.
Setting up the radio
Presetting stations automatically
[email protected]
456
78
0
9
OK
EXT-INRADIO
STATUSAUDIO
ABCDEF
JKL
MNO
TUV
GHIQRS
PXYZ W
_,
SEARCHSEARCH
RADIO
AUDIO
STATUS
,
SEARCH
SEARCH
OK
Numbered
buttons
Listening/confirming the preset 
channels
Manual tuning
ST
T MONO
T
MONO
After changing the setting, previously preset  frequencies will be cleared. Preset them again.
NOTE
Radio
BTX70PP_eng.book  23 ページ  ２００９年６月２４日　水曜日　午後３時４２分
 
						

							24
RQT9479
Enjoying TV, etc. with this unit’s speakers
You can enjoy TV broadcasts with this unit’s speakers.
PreparationConfirm the audio connection to the OPTICAL IN or AUX terminal on 
the main unit. (>9 to 10)
Turn on the TV.
1 Press [EXT-IN] several times to select “D-IN 1” 
(DIGITAL IN 1)*1, “D-IN 2” (DIGITAL IN 2)*2 or 
“AUX”*1.Main unit: Press [RADIO/EXT-IN].
≥ D-IN 1 (DIGITAL IN 1) *
1:
When connecting using OPTICAL 1(TV) terminal.
≥ D-IN 2 (DIGITAL IN 2) *
2:
When connecting using OPTICAL 2(STB) terminal.
≥ AUX *
1:
When connecting using AUX terminal.
*1 For connections with the TV.
*2 For connections with other devices.
≥ When the system is connected to an HDAVI Control 2 or 
later-compatible TV via an HDMI cable, TV broadcast audio is output 
through the system speakers if the  TV input is switched to TV tuner 
mode. See “Setting the TV audio for VIERA Link “HDAVI Control”” on 
page 25 for setting method.
≥ Reduce the volume on the TV to its minimum, and then adjust the 
volume of the main unit.
You can enhance stereo sources with surround sound effect.
Press [SURROUND] several times to select the mode.≥ You can also press [SURROUND] and then [ 3,4] to select the 
mode.
≥ The selected effect will only be displayed on the main unit.
For more detailed information on this operation, please refer to the 
“Enjoying surround sound effects” section on page 15. You can adjust the mode depending on the source or situation.
1
Press [SOUND] several times to select the mode.≥You can also press [SOUND] and then [ 3,4 ] to select the 
mode.
≥ The selected effect will only be displayed on the main unit.
2While the selected mode is displayed
Press [ 2,1] and select the desired setting.
For more detailed information on this operation, please refer to the 
“Changing the sound modes” section on page 15.
Select to suit the type of audio from the OPTICAL IN terminals on the 
main unit.
≥ Underlined items are the factory presets.
1 Press [EXT-IN] several times to select “D-IN 1” 
(DIGITAL IN 1) or “D-IN 2” (DIGITAL IN 2).
Main unit: Press [RADIO/EXT-IN].2Press [STATUS] several times to select the mode.
≥You can also press [STATUS] and then [3,4] to select the mode.≥The digital audio input settings are to be set separately to each 
source, “D-IN 1” and “D-IN 2”.
≥ The selected effect will only be displayed on the main unit.
3While the selected mode is displayed
Press [ 2,1] and select the desired setting.*3 When “D-IN 1” is selected.
*4 When “D-IN 2” is selected.
*5 The device connected to the OPTICAL 2(STB) terminal must be 
connected to the TV via an HDMI cable. If it is not connected via an 
HDMI cable, “NOT CONDITIONAL” is displayed on the main unit.
Enjoying TV and other devices sound 
from this unit’s speakers
Recommended modes to enjoy TV audio:
2.1 ch mode
≥DOLBY VIRTUAL SPEAKER REFERENCE
≥ DOLBY VIRTUAL SPEAKER WIDE
4.1 ch/6.1 ch mode ( >42)
≥ DOLBY PL II MOVIE
≥ DOLBY PL II MUSIC
≥ S.SURROUND
OK
EXT-IN
SOUNDSURROUND
STATUS
EXT-IN
STATUS
SURROUND
SOUND
Adjusting the sound
Making settings for digital audio input
Available settings
ModeSetting
DUAL: (Only works with Dolby Dual Mono)
–MAIN
– SAP *
– M+S
* (stereo audio)
*“ SAP ” = Secondary Audio Program
≥ If this is set to “MAIN” or to “SAP”, the PCM FIX 
modes will automatically be set to “OFF”. 
DRC:
(Dynamic 
Range 
Compression) –
ON
Adjust for clarity even when the volume is low by 
compressing the range of the lowest sound level 
and the highest sound level. Convenient for late 
night viewing. (Only works with Dolby Digital)
– OFF
The full dynamic range of the signal is reproduced.
PCM FIX: –ON
Select when receiving only PCM signals.
– OFF
Select when receiving Dolby Digital and PCM 
signals.
≥ When receiving true 5.1-channel surround 
sound, select “OFF”.
≥ If this is set to “ON”, the DUAL mode will 
automatically be set to “M+S”.
TV AUDIO*
3: –
AUXSelect when receiving analogue sound from the 
TV to the AUX terminal.
– D-IN 1
Select when receiving digital sound from the TV 
to the OPTICAL 1(TV) terminal.
CABLE/SAT 
AUDIO*
4, 5: –
SET
Select when setting the main unit to switch to 
“D-IN 2” when the input channel of an HDMI 
connected STB is selected on the TV ( B25, 
Setting the TV audio for VIERA Link “HDAVI 
Control”).
– OFF
Select to cancel this setting.
≥Audio that is input through the OPTICAL DIGITAL IN or 
AUX terminals are not output from the HDMI terminal.
NOTE
TV
BTX70PP_eng.book  24 ページ  ２００９年６月２４日　水曜日　午後３時４２分
 
						

							25
RQT9479
Linked operations with the TV
(VIERA LinkTM “HDAVI ControlTM”)
When switching between this unit’s speakers and TV speakers, the TV screen may be blank for several seconds.
What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function that offers linked 
operations of this unit, and a Panasonic TV (VIERA) under “HDAVI Control”.
You can use this function by connecting the equipment with an HDMI cable. See 
the operating instructions for connected equipment for operational details.
Preparation1 Connect this unit to your TV with an HDMI cable. ( >9)
2 Set “VIERA Link” to “On”. ( >36) 
(The default setting is “On”.)
3 Set the “HDAVI Control” operations on the connected equipment (e.g., TV).
4Turn on all “HDAVI Control” compatible equipment and select this unit’s input 
channel on the connected TV so that the “HDAVI Control” function works 
properly.
Also when the connection or settings are changed, repeat this procedure.
≥VIERA Link “HDAVI Control”, based on the control 
functions provided by HDMI which is an industry 
standard known as HDMI CEC (Consumer 
Electronics Control), is a unique function that we 
have developed and added. As such, its operation 
with other manufacturers’ equipment that 
supports HDMI CEC cannot be guaranteed.
≥This unit supports “HDAVI Control 4” function.“HDAVI Control 4” is the newest standard 
(current as of December, 2008) for Panasonic’s 
HDAVI Control compatible equipment. This 
standard is compatible with Panasonic’s 
conventional HDAVI equipment.
≥ Please refer to individual manuals for other 
manufacturers’ equipment supporting VIERA 
Link function.
≥ It is recommended that you use 
Panasonic’s HDMI cable.
Recommended part number:
RP-CDHG10 (1.0 m/3.3 ft.), RP-CDHG15 (1.5 m/
4.9 ft.),RP-CDHG20 (2.0 m/6.6 ft.), RP-CDHG30 
(3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc.
≥Non-HDMI-compliant cables cannot be utilized.
Setting the TV audio for VIERA Link “HDAVI Control”
You can set the main unit to link audio operations with the TV.∫ Setting the audio from the TV
Preparation
≥Select between “AUX” and “D-IN 1” (DIGITAL IN 1) to work with the linked 
operations for the TV audio.
– Confirm the audio connection to the AUX terminal (for “AUX”) or 
OPTICAL 1(TV) terminal (for “D-IN 1”). (> 9)
With the remote control of the main unit;
1 Press [EXT-IN] to select “AUX” or “D-IN 1” (DIGITAL IN 1).
2 Press [STATUS].
3 Press [ 3,4] to select “TV AUDIO”.
4 Press [ 2,1] to switch “AUX” or “D-IN 1” (DIGITAL IN 1) and press [OK].
Whenever the connection or settings  are changed, reconfirm the points above.
∫Setting the audio from the STB
This unit can be set to link operations with the TV so as to output audio from the 
connected STB, etc. when the TV input is set to the input channel designated for 
the STB, etc.
Preparation
≥Select the STB input channel on the TV.
≥Confirm the audio connection to the OPTICAL 2(STB) terminal (for “D-IN 2”). (>10)
With the remote control of the main unit;
1 Press [EXT-IN] to select “D-IN 2” (DIGITAL IN 2).
2 Press [STATUS].
3 Press [ 3,4] to select “CABLE/SAT AUDIO”.
4 Press [ 2,1] to select “SET” and press [OK].
≥ If the input channel of the STB on the TV is changed or if you want to change 
the device allocated for the linked operations, select “OFF” in step  4 above and 
then repeat steps  1 to  4.
≥The connected STB must also be connected 
to the TV via an HDMI cable.
Refer to the operating instructions of the 
respective device for details.
≥It is also possible to connect an HDMI and 
optical output compatible Panasonic DVD 
recorder in the place of the STB.
What you can do with “HDAVI Control”
Speaker output
You can select whether audio is output from the unit’s speakers or  the TV speakers by using the TV menu settings. For details, refer to the 
operating instructions of your TV.
Home theater
This unit’s speakers are active.
≥ When this unit is in standby mode, changing the TV speakers to th is unit’s speakers in the TV menu will automatically turn the unit on and 
select “AUX”*
1, “D-IN 1” (DIGITAL IN 1)*1 or “D-IN 2” (DIGITAL IN 2)*2 as the source.
≥ The TV speakers are automatically muted.
≥ You can control the volume setting using the volume or mute button on the TV’s remote control. (The volume level is displayed o n the main 
unit’s FL display.)
≥ To cancel muting, you can also use the home theater remote control ( >17).
≥ If you turn off this unit, TV s peakers will be automatically activated.
TV
TV speakers are active.
≥ The volume of this unit is set to “0”.
– This function works when “BD/DVD”, “SD”, “AUX”*
1, “D-IN 1” (DIGITAL IN 1)*1 or “D-IN 2” (DIGITAL IN 2)*2 is selected as the source on the 
home theater system.
≥ Audio output is 2-channel audio.
≥When “TV” is selected in “Speaker output”, the audio from an iPod will not be output  from the TV’s speakers during slideshow 
Background music playback. (>21)
NOTE
NOTE
TIPS
NOTE
TV
BTX70PP_eng.book  25 ページ  ２００９年６月２４日　水曜日　午後３時４２分
 
						

							26
RQT9479
Linked operations with the TV 
If you connect this unit to a TV that has “HDAVI Control 2” or later with an 
HDMI cable, you can operate this unit using buttons on the TV remote control.
The buttons that you can use for this unit vary, depending on the TV. 
For details, refer to the operating instructions of the TV.
Use the remote control supplied with this unit if you cannot operate this 
unit using buttons on the TV remote control.
≥The operation of this unit may be interrupted when you press 
incompatible buttons on the TV remote control.
∫ Using the Control Panel
You can operate the playback with the indicated controls.
∫When you want to leave the TV on and set only this unit to standby modePress [ Í] on this unit’s remote control and set to standby mode.∫When not using “HDAVI Control”Set “VIERA Link” in the Setup menu to “Off”. ( >36)
Automatic input switching
When the following operations are performed, the TV will 
automatically switch the input channel and display the 
corresponding action.
– When play starts on the unit
– When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
≥ When you switch the TV input to TV tuner mode, this unit will 
automatically switch to “AUX”*
1, “D-IN 1” (DIGITAL IN 1)*1 or “D-IN 
2” (DIGITAL IN 2)*2.
≥ This function does not work when the iPod selector (SIMPLE 
mode) or iPod Video menu (EXT ENDED mode) is chosen. (>28)
≥When [ 1PLAY] is pressed, the playback image is not 
immediately displayed on the screen and it may not be 
possible to watch the contents from where playback 
started.
In this case, press [SKIP :] or [SEARCH 6] to go back 
to where playback started.
Automatic lip-sync function 
(for HDAVI Control 3 or later)
Delay between audio and video is automatically adjusted, enabling 
you to enjoy smooth audio for the picture. ( >36, Time Delay)
≥ This function works only when “BD/DVD”, “SD”, “AUX”*
1, “D-IN 1” 
(DIGITAL IN 1)*1 or “D-IN 2” (DIGITAL IN 2)*2  is selected as the 
source on this unit.
Power off link
All connected equipment compatible with “HDAVI Control”, including 
this unit, automatically turns off when you switch the TV off.
≥ This unit automatically turns off even during playback or any other 
operation.
To continue audio playback even when the TV is turned off, 
select “Video” in “Power Off Link”. ( >36)
∫ Auto power stand-by
Auto power stand-by respons ibly manages your power 
consumption.
This function is available with a TV that supports “HDAVI Control 4”.
≥ If connected with a TV (VIERA) with the “Auto power stand-by” 
setting activated on the TV, when switching the TV input, the unit 
will be automatically turned to standby. For details please read the 
operating instructions of the TV.
≥When “Speaker output” is set to “Home theater”, the main unit 
will not automatically turn to standby.
One touch play
You can turn on this unit and the TV, and start play with a single 
press of a button.
While the unit and the TV are in standby mode;
Press [ 1PLAY].
≥ This unit’s speakers will automatically be activated. ( >25)
≥When [ 1PLAY] is pressed, the playback image is not 
immediately displayed on the screen and it may not be 
possible to watch the contents from where playback 
started.
In this case, press [SKIP :] or [SEARCH 6] to go back 
to where playback started.
*1“AUX” or “D-IN 1” works depending on the “TV AUDIO” setting. 
(B 25, Setting the TV audio for VIERA Link “HDAVI Control”)
*2“D-IN 2” works depending on the “CABLE/SAT AUDIO” setting. 
(B25, Setting the TV audio for VIERA Link “HDAVI Control”)
NOTE
NOTE
Easy control only with VIERA remote 
control
Using the START menu to operate this unit
By using the TV remote control, you can play media using the START menu.
1 Press the button for VIERA Link 
on the TV remote control.
2 Select the home theater.
≥The START menu is displayed
3 Select the desired items on the 
START menu ( >13).
Using the sub menu to operate this unit
By using the TV remote control, you can play discs using the 
“Control Panel” and display the Top Menu (for BD-Video and 
DVD-Video) or Pop-up Menu (for BD-Video).
≥This works only during “BD/DVD” or “SD” playback and resume modes.
1 Press [SUB MENU].≥You cannot use the sub menu while the Top 
Menu for BD-Video or DVD-Video is displayed.
≥This can also be displayed by using the 
VIERA menu screen.
2 Select an item, then press [OK].
Control PanelControl Panel is displayed. Follow the 
indications on the screen. (>below)
Screen Aspect(>18)
Top Menu  [BD-V] [AVCHD]  [DVD-V]Top menu is displayed.
Menu  [DVD-V]Menu is displayed.
Pop-up Menu  [BD-V]Pop-up menu is displayed.
Rotate Right [JPEG]Rotate the still picture.
Rotate Left [JPEG]
Zoom in [JPEG]Enlarge or shrink the still picture.
Zoom out  [JPEG]
≥Depending on the menu, some button operations cannot 
be performed from the TV’s remote control.
≥ You cannot input numbers with the numbered buttons on 
the TV’s remote control ([0] to [9]). Use this unit’s remote 
control to select the playlist etc.
e.g.,  [BD-V]
Menu
OKRETURN
Other Functions
Playback DISCTo p  M e n u
Home theater START
BD-Video
Input SelectSound(Equalizer)
Network
OK
RETURN
SUB
MENU
Control Panel
Screen Aspect
Top Menu
Pop-up Menu
e.g.,  [BD-V]
e.g.
NOTE
TV
BTX70PP_eng.book  26 ページ  ２００９年６月２４日　水曜日　午後３時４２分
 
						

							27
RQT9479
Using the iPod
You can enjoy iPod music through this unit’s speakers or view iPod videos/photos on the TV.
Preparation≥To view photos/videos from the iPod.
– Ensure the video connection to the VIDEO OUT terminal on this unit  (>9).
– Operate the iPod menu to make the appropriate video/photo output se ttings for your TV. (Refer to the operating instructions of your iPod.)
≥ To display the picture, turn on the TV and select the appropriate video input mode.
≥ Before connecting/disconnecting the iPod, turn the main unit off or reduce the volume of the main unit to its minimum.
Compatible iPod
iPod Connection
1 Press [iPod  
						

							28
RQT9479
Using the iPod 
This system features two different iPod playback modes.
The first of these is EXTENDED mode, for playback of music and video contents. With this mode, you can operate the iPod from the main unit. 
The second mode is SIMPLE mode, which can be used for playback of  three types of contents – music, photos, and videos. With this mode, 
simple operations such as play, stop, and search can be performed on the display of your iPod.
1 Press [iPod] to select  “IPOD ”.The iPod automatically switches  to this unit’s display mode.
To switch the menu, press [STATUS] several times.
Music menu
"""""#Video menu
^"iPod menu (iPod LCD)!}≥“MUSIC” or “VIDEOS” is displayed on the main unit.
–When playing back video contents, ensure the video connection to the VIDEO OUT terminal on this unit ( >9) 
and switch the TV input to video in.
2 Press [ 3,4] to select an item and press [OK].≥ Play starts from the selected song or video.
≥ To display the previous or next page
Press [ 2,1].
≥ Press [RETURN] to return to the previous screen.
Clear/display iPod Music or Video menu during playback.
Press [TOP MENU/DIRECT NAVIGATOR].
You can also play music and video using SIMPLE mode.
1 Press [iPod] to select “IPOD”.
2 Press [STATUS] several times to select the iPod 
menu
 (iPod LCD).≥“ALL” is displayed on the main unit.≥If the sliding door is closed, press [iPod  9).4Play a slideshow on your iPod.The picture will be displayed on your TV.
You can also use the remote control to operate iPod menu.≥[3 ,4 ]:  To navigate menu items
≥ [OK]:  To go to the next menu
≥ [RETURN]:To return to the previous menu
The remote control operation may vary between iPod models. While in “Music” or “Video” mode, it is possible to select the following 
playback modes.
*
1 For music playback only.
1 Press [START].
2 Press [ 3,4] to select “Menu” and then press 
[OK].
3 Press [ 3,4] to select “Playback Mode” and 
then press [OK].
4 Press [ 3,4] to select an item and press [OK].
5 Press [ 3,4] to select the setting and press 
[OK].
While playing music or video it is possible to use the following buttons 
of the remote control.
≥ Use the controls on the iPod unit during photo playback.
You can select the surround sound effect when you press [SURROUND]  (>15).
You can select the sound mode when you press [SOUND]  (>15).
iPod Playback
Enjoy music/video (EXTENDED mode)
≥If the Video menu (EXTENDED mode) is accessed, the 
video shuffle playback mode on the iPod is set to Off 
when the iPod is disconnected from the unit.
Enjoy photos (SIMPLE mode)
Music
iPod
RETURNOK
PlaylistsArtistsAlbumsSongsPodcastsAudiobooks
e.g., music main menu screen
iPod
Ronaldo
2:43
Good morning
45 of 1230
Happy days
Shuffle (Albums)
Repeat (All)
Playback condition
Song
Album
Playing position Playback mode Artist
e.g., music playback screen
NOTE
Other methods of playback
ItemsSelection/playback method
Playback 
Mode Shuffle*1
≥
Off: Cancel
≥ Songs: Play all songs on iPod in random 
order.
≥ Albums: Play all songs on album in random 
order.
Repeat
≥ Off: Cancel
≥ One: Play a single song/video 
repeatedly.
≥ All: Play all songs/videos from 
selected items (e.g., Playlists, 
Albums, etc.) repeatedly.
Playback modes during and after connection.
≥ Music playback modes set on the iPod will be maintained 
when connected to the main unit. Changes made while 
the iPod is connected to the main unit be kept on the iPod 
after disconnecting it.
≥ If the Video menu (EXTENDED mode) is accessed, the 
video shuffle playback mode on the iPod is set to Off 
when the iPod is disconnected from the unit.
To return to the previous screen
Press [RETURN].
Basic controls
ButtonsFunctions
[ 1PLAY] Play
[ ∫STOP] Pause
≥Press [ 1PLAY] to restart play.
≥ Playback start position may not be stored 
in memory in certain cases.
[
;PA U S E ]
[SKIP :, SKIP 9] Skip
(Press and hold) [SEARCH6 , 
SEARCH 5] Search
NOTE
TIPS
Other devices
BTX70PP_eng.book  28 ページ  ２００９年６月２４日　水曜日　午後３時４２分
 
						

							29
RQT9479
Enjoying VIERA CASTTM
You can access a selection of Internet services from the Home screen with VIERA CAST, for example YouTube, Picasa Web Albums.
(Current as of April 2009)
≥VIERA CAST requires a broadband Internet connection. Dial-up Internet connections cannot be used.
Firmware updating
Preparation≥Network connection ( >11 )
≥ Network setting ( >30)
1While stopped
Press [BD/SD] to select “BD/DVD”.
2 Press [VIERA CAST].
≥Message is displayed. Please read these instructions carefully and then press 
[OK] to start VIERA CAST function.
Images are for illustration purposes, 
message may change without notice.
3Press [ 3,4, 2,1] to select the item and press [OK].≥You can operate VIERA CAST using the following buttons on the unit’s remote 
control. [3, 4,2, 1], [OK], [RETURN], colored buttons and numbered 
buttons.
≥To access more features on YouTube or Picasa Web Albums site, enter your user ID 
and password that you have previously set up with these sites through the Internet 
on your PC. However, not all features may be accessible through VIERA CAST.
VIERA CAST Home screen;
Images are for illustration purposes, 
contents may change without notice.
Regarding “Settings”
Set VIERA CAST Home screen.
≥ My Account: You can remove your account from the unit.
≥ Lock: Enter a password to lock YouTube and Picasa Web Albums.
≥ Notices
≥Depending on the usage conditions, it may take a 
while to read all the data.
≥ The connection to the Internet may take time or 
the Internet may not be connected depending on 
the connection environment.
≥The unit is connected to the Internet when VIERA 
CAST is used, generating communication charges.
≥VIERA CASTTM home screen is subject to change 
without notice.
≥ The services through VIERA CAST
TM are operated 
by their respective service providers, and service 
may be discontinued either temporarily or 
permanently without notice. Therefore, Panasonic 
will make no warranty for the content or the 
continuity of the services.
≥ All features of websites or content of the service 
may not be available.
≥ Some content may be inappropriate for some 
viewers.
≥ Some content may only be available for specific 
countries and may be presented in specific 
languages.
≥Set the “Network Lock” to “On” to restrict using 
VIERA CAST. ( >37)
≥ Set the “Audio Auto Gain Control” to “Off” when 
the audio is warped while using the VIERA CAST. 
(> 37)
≥ When the display of the contents is truncated, set 
the “Reduce to Screen Size” to “On”. ( >37)
≥ Set the “On-screen Language”, to switch the 
language for Home screen. ( >35)
≥ Set the “Time Zone” or “DST” when the wrong time 
is displayed on the screen. ( >37)
To return to VIERA CAST Home screen
Press [VIERA CAST].
To exit from VIERA CAST
Press [START] or [TOP MENU/DIRECT 
NAVIGATOR], then press [RETURN] to cancel the 
menu.
Welcome to Network Service
Your Panasonic Network Service allows you to access web-based content on \
your Player/Recorder. Some  web content may be inappropriate for some viewers. You may disable the Network Service feature by  following the instructions found in your Operating Instructions. 
Some web content may only be available from within select countries and \
may be presented in languages  different than the one selected in your On-screen Language settings menu.
It's recommanded your player/recorder is connected to Full HD display wi\
th HDMI. The display of the  contents may be truncated, depending on your TV. You may reduce to screen size by following the  instructions found in your Operating Instructions.
ENTERDon’t show this message again
Settings
Panasonic SelectFeatured Videos
BloombergXXX
XXX
XXX7465.95
778.94
1442.82 -89.68
-9.47998 -25.15TELEVISION15min. delay
Weather28ÃNew York, NY
WNW7mph
Web AlbumsTMAfter you access YouTube or Picasa WebAlbums from the VIERA CAST Home 
screen and add your favorite videos or 
albums to VIERA CAST, you can choose 
them easily from the Home screen.
NOTE
TIPS
When this unit remains connected to the Internet, it will automatically check for the 
latest firmware version when it is turned on.
When latest firmware version is available, the following screen is displayed.
Select “Yes” or “No”.
≥ If “Yes” is selected, then follow the on-screen instructions.
≥ If “No” is selected, then manually update the firmware later. ( Bright)
After the latest firmware is downloaded, the system will be restarted and the firmware 
will be updated.
When the system is restarted, the screen display disappears and 
“START” is displayed on the unit’s display.
After the firmware is updated and the system is restarted, the 
following screen indicates that the firmware update has been completed.
≥ During the update process, no other operations can be performed. Serious damage 
may occur if you turn off the unit and/or press any buttons.≥Downloading will require several minutes. It may 
take longer or the Internet may not be connected 
depending on the connection environment. It is 
required that you use a broadband connection.
≥If downloading on this unit fails or this unit is not 
connected to the Internet, then you can download 
the latest firmware from the following website and 
burn it to a CD-R to update the firmware.
http://panasonic.net/support/
(This site is in English only.)
≥When the unit is connected to the Internet, 
communication charges may be generated.
≥ If you do not want to check for the latest firmware 
version when the unit is turned on, set “Automatic 
Update Check” to “Off”. ( >37)
Manually updating the firmware
If the firmware update is not carried out when the 
unit is turned on, a message is displayed when 
displaying the START menu.
1) Press [SETUP].
2) Press [3,4] to select “Others” and press [OK].3) Press [3 ,4] to select “Firmware Update” and 
press [OK].
4) Press [ 3,4] to select “Update Now” and press 
[OK].
5) Press [ 2,1] to select “Yes” and press [OK].
Firmware Update
Ye s No
The latest firmware is available.
  Latest Online Version: x.x
  Current Installed Version: x.x 
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
The firmware has been updated.
Current Installed Version: x.x
RETURNOK
NOTE
TIPS
The latest firmware is available.
Please update firmware in Setup.
Advanced operations
BTX70PP_eng.book  29 ページ  ２００９年６月２４日　水曜日　午後３時４２分
 
						

							30
RQT9479
Network settings
These settings are used if you will connect this unit to the Internet. (>37)
≥ The connection to the Internet may take time or the Inter net may not be connected depending on the connection environment. 
It is required that you use a broadband connection.
Preparation≥ Connect to a broadband network. ( >11 )
Testing of “IP Address/DNS Settings”
Always test the connection when a LAN cable is connected.
1While stopped
Press [BD/SD] to select “BD/DVD”.
2 Press [SETUP].
3 Press [ 3,4] to select “Network” and press 
[OK].
4 Press [ 3,4] to select “IP Address/DNS 
Settings” and press [OK].
5 Press [ 3,4] to select “Connection Test” and 
press [OK].
“Testing...”: The test is in progress.
“Pass”: The connection is completed. Press [RETURN] to exit.
“Fail”: Please check the connection and settings.
≥ Perform the “Connection Test” also when any change was 
made to the “IP Address/DNS Settings”.
≥If the connection test fails, it may be necessary to set the MAC 
address of this unit at the router side. The MAC address can be 
displayed by pressing [SETUP] and selecting “Network”.
N
RUT
E
R
K
O
IP Address/DNS  Settings
Connection Test
OnOn
OnOn
OnOn
IP Address Auto Configuration ( DHCP )
DNS Auto Configuration ( DHCP )
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto Detect Connection Speed
Connection Speed Setting
NOTE
RETURN
NetworkIP Address/DNS  Settings
Proxy Server Settings
Network Service
MAC Address:  xx-xx-xx-xx-xx-xx
OK
Setting the IP address
In most cases, default settings can normally be used without 
making any changes.
Set the IP address only when the router has no DHCP server 
functions or when the router’s DHCP server function is 
disabled.
After performing steps  1 to 4 (D left)
5 Press [ 3,4] to select “IP Address Auto 
Configuration ( DHCP )” and press [ 2,1] to 
select “Off”.
6 Press [ 3,4] to select “IP Address”, “Subnet 
Mask” or “Default Gateway” and press [OK].
7 Enter numbers with the numbered buttons and 
press [OK].
≥After checking the specifications for your broadband router, 
enter each number.
If the number is unknown, then check the number of other 
devices such as personal computers connected via a LAN 
cable. Assign a different number from those of other devices 
for the “IP Address” and the same number for others.
≥ If a wrong number is entered, then press [CANCEL].
8 Press [ 2,1] to select “Yes” and press [OK].
≥ The numeric input range is between 0 and 255.
Setting the DNS-IP
In most cases, default settings can normally be used without 
making any changes.
When setting an assigned DNS server from your Internet 
service provider, perform the following settings.
After performing steps  1 to 4 (D left)
5 Press [ 3,4] to select “DNS Auto 
Configuration ( DHCP )” and press [ 2,1] to 
select “Off”.
6 Press [ 3,4] to select “Primary DNS” or 
“Secondary DNS”and press [OK].
7 Enter numbers with the numbered buttons and 
press [OK].
≥Follow the instructions given by  your Internet service provider 
and enter the numbers.
If the number is unknown, then check the number of other 
devices such as personal computers connected via a LAN 
cable and assign the same number.
≥ If a wrong number is entered, then press [CANCEL].
8 Press [ 2,1] to select “Yes” and press [OK].
≥ The numeric input range is between 0 and 255.
NOTE
192. ..1
Primary DNS
Please input Primary DNS and press
[OK]. Press [CANCEL] to delete the selected 
character. To clear this setting, delete all 
characters and press [OK].
Number0  -  9    
NOTE
Advanced operations
BTX70PP_eng.book  30 ページ  ２００９年６月２４日　水曜日　午後３時４２分