Panasonic SD Media Storage Sv Pt1 Operating Instructions

							31
TV Mode
TV Mode (Slide Show Settings)
1Do Steps 1~3 on page 29. In Step 3,
press  to select “SELECT”.
2Press  to select “EFFECT”, then
press SET.
3Press  for desired transition
effect, then press SET.
NORMAL: images change one by one.
WIPE: images change from top to
bottom.
SPLIT: images change from middle to
each side.
BLIND: images change in a window
blind fashion.
4Press  to return to “SLIDE SETUP”.
Setting Screen Transition Effects
1Do Steps 1~3 on page 29. In Step 3,
press  to select “SELECT”.
2Press  to select “SPEED”, then
press SET.
3Press  for desired transition
speed, then press SET.
FAST: images change every
2 seconds.
NORMAL: images change every
5 seconds.
SLOW: images change every
10 seconds.
* If larger file size images are included,
display takes longer and transition time
may exceed the selected setting.
4Press  to return to “SLIDE SETUP”.
Setting Screen Transition Speed
The Sub Menu will disappear if MENU is pressed while the Sub Menu is displayed.
Selecting “RETURN TO MENU” will redisplay the Main Menu.
Selecting “RETURN” changes the display back one level.
Selecting “EXIT” returns display to first level of hierarchy (p. 27).
If “RETURN” is selected or MENU is pressed from the “EFFECT” or “SPEED” menu, the
display returns to the previous sub menu.– Note –
PT1.p29-33.p652003/01/14, 12:37 31 
						

							32
TV Mode (Presentation)
Microsoft PowerPoint data created on a PC can be converted into JPEG files using
the supplied JPEG Addin Software and then presented on the TV.
See pages 46 and 47 on how to create presentation files.
M
CANCEL
ENU
/SET
MENU
SET
1Press  to select “PRESENTATION”,
then press SET.
Make sure a folder (pink) containing
presentation files exists in the index.
2Press MENU.
3Press  to select “START”, then
press SET.
Only folders containing presentation files
will be displayed in the Index Area.
To customize presentation data, press
MENU again, then select “SET
CONTENTS”. (p. 33)
4Press   to select a folder, then
press SET.
The first slide is displayed.
Performing Presentation
To display the next slide:
Press 
.
Pressing 
 displays previous slide.
To exit presentation:
Press CANCEL.
Selecting “RETURN TO  MENU” will redisplay the Main Menu.
Selecting “RETURN” changes the display back one level.
Selecting “EXIT” returns display to first level of hierarchy (p. 27).
Slides will be presented in the order they were selected. You can confirm presentation files
and the order in the index. This data is stored on the unit until selections are deleted. (p. 33)
Only folders entitled “PRES_***” (last 3 digits “***” are variable) are recognized as
presentation folders. If you change the folder name on a PC, only change the last 3 digits,
otherwise, it will not be recognized.– Note –
CANCEL
PT1.p29-33.p652003/01/14, 12:37 32 
						

							33
TV Mode
1Do Steps 1~3 on page 32. In Step 3,
select  “SET CONTENTS”, then press
SET.
2Press   to select a folder, then
press SET.
Folder contents will be displayed.
3Press  to select “SLIDE SELECT”,
then press SET.
Selecting “RETURN” displays previous slide.
4Press   to select a slide, then
press SET.
Pressing SET again cancels selection.
“” appears at bottom, right corner of a
selected slide.
Repeat Step 4 until all slides to be displayed
are selected. Presentation will be in the order
slides were selected.
5Press MENU when selection is
complete.
6Press   to select “YES”, “CONTINUE”
or “CANCEL”, then press SET.
YES: To finish selection.
CONTINUE: To continue selection.
CANCEL: To cancel selection and return
 to menu.
To unselect images:
Press  to select “RELEASE”, then press
SET.
The selected images are returned to the their
original state.
To preview the presentation contents(REHEARSAL):
Press  to select “REHEARSAL”, then
press SET.
Each slide will appear approx. 2 seconds.
Pressing CANCEL will cancel this operation.
Pressing SET will pause this operation.
When the number of saved files is great, it may
take time to go into Pause/Stop mode.
7Press  to select “RETURN”, then
press SET.
To proceed with presentation, return to
Step 3 on page 32.
TV Mode (Presentation)
Selecting Presentation Content
You can select specific slides from the index to be displayed. If you wish to include all
images in the index, this procedure is not necessary.
PT1.p29-33.p652003/01/14, 12:37 33 
						

							34
1Press  to select “EDIT”, then
press SET.
2Press MENU.The Menu screen will be displayed.
3Press  to move the cursor to the right.
Press  to select “SELECT” or “ALL”,
then press SET.
SELECT: To select specific images
and folders to be deleted.
ALL: To delete all images/folders
displayed in the index.
Those not displayed are not
deleted.
Protected images cannot be deleted
unless protection is canceled. (p. 36)
To select a file within a folder, it must
 first be displayed in the index. (p. 27)
For “select delete”, follow “How to
Select Images” instructions on
page 37.
4Press   to select “YES”, then
press SET.
The selected images will be deleted.
To cancel the operation, select “NO”.
TV Mode (Editing)
You can delete images from a card, copy data from one card to another, and protect
data from being deleted accidentally.
Deleting Images (DELETE)
M
CANCEL
ENU
/SET
MENU
SET
(Example: when selecting “SELECT”)
PT1.p34-37.p652003/01/14, 12:37 34 
						

							35
TV Mode
1Press  to select “EDIT”, then
press SET.
2Press MENU.The Menu screen will be displayed.
3Press  to select “COPY”, then
press  to move the cursor to the
right.
4Press  to select “SELECT” or “ALL”,
then press SET.
SELECT: To select specific images
and folders to be copied*.
ALL: To copy* all images/folders
displayed in the index.
* When a folder is copied, all contents
including non-image files are copied.
To select a file within a folder, it must
first be displayed in the index. (p. 27)
For “select copy”, follow “How to
Select Images” instructions on
page 37.
5Press   to select “YES”, then
press SET.
Images are copied to the other card.
To cancel the operation, select “NO”.
TV Mode (Editing)
Copying Images (COPY)
(Example: when selecting “SELECT”) Copy data from one card to another. A card to receive copied data must be inserted.
The Sub Menu will disappear if MENU is pressed while the Sub Menu is displayed.
Selecting “RETURN TO MENU” will redisplay the Main Menu.
Selecting “RETURN” changes display back one level.
Selecting “EXIT” returns display to first level of hierarchy (p. 27).
“ALL” selection deletes all files within a folder, so check folder contents before proceeding.
Files/folders not displayed are not deleted.
Gray folders contain no displayable files and cannot be deleted.
Any files with the same first eight characters in their file names as those selected will be
copied or deleted as well.– Note –
PT1.p34-37.p652003/01/14, 12:37 35 
						

							36
1Press  to select “EDIT”, then
press SET.
2Press MENU.The Menu screen will be displayed.
3Press  to select “PROTECT”,
then press  to move the cursor to
the right.
4Press    to select “SELECT” or
“ALL”, then press SET.
SELECT: To select specific images
and folders to protect*.
ALL: To protect* all images/folders
displayed in the index.
* When a folder is protected, all contents,
including non-image files, are protected.
For “select protect”, follow “How to
Select Images” instructions on
page 37.
5Press   to select “SET”, then
press SET.
The image or folder will be protected.
A “key” icon appears in the upper, left
corner of the image.
To cancel protection of an image, select
“RELEASE”.
TV Mode (Editing)
Protecting Images (PROTECT)
Impor tant file data can be protected from accidental deletion.
The Sub Menu will disappear if MENU is pressed while the Sub Menu is displayed.
Selecting “RETURN TO MENU” will redisplay the Main Menu.
Selecting “RETURN” changes display back one level.
Selecting “EXIT” returns display to first level of hierarchy (p. 27).
Any files with the same first eight characters in their file names as those selected will be
protected as well.– Note –
PT1.p34-37.p652003/01/14, 12:37 36 
						

							37
TV Mode
M
CANCEL
ENU
/SET
MENU
SET
TV Mode (Editing)
Select image files for the DELETE, COPY, and PROTECT functions.
The example screens below depict deleting an image.
1Press   to select an image,
then press SET.
Pressing SET again cancels selection.
“” appears in the bottom, right corner of
the selected image.
Repeat Step 1 until all desired images are
selected.
2Press MENU when image selection is
finished.
Pressing MENU again resumes selecting
operation.
3Press    to select “YES”,
“CONTINUE” or “CANCEL”, then
press SET.
YES: To finish selection.
CONTINUE: To continue selection.
CANCEL: To cancel selection and
return to menu.
How to Select Images
PT1.p34-37.p652003/01/14, 12:37 37 
						

							38
M
CANCEL
ENU
/SET
MENU
SET
TV Mode (Full Screen Playback)
1Display the index. (p. 27)
2Press   to select a file, then
press SET.
Image is displayed in full screen.
Display an Image (from the index)
When in image display or album mode, you can view an image full screen. Also, you
can use zoom, rotate, add color effects, display image information, and delete the
image.
Selecting Images
To display the next image:
Press 
 to display next image in the
current index.
Press   for previous image.
1Display an album. (p. 28)
2Press MENU.
3Press  to select “FILE SELECT”
then press SET.
Display an Image (from an album)
To display the next image:
Press 
 to display next image in the
current album.
Press  for previous image.
PT1.p38-41.p652003/01/14, 12:37 38 
						

							39
TV Mode
TV Mode (Full Screen Playback)
1Press  to select “ZOOM” from the
sub menu, then press SET. (Refer to
the above section.)
2Press  to select “X 2” or “X 4”,
then press SET.
3Press   to select an area for
zooming, then press SET.
To enlarge a X2 image to X4, press MENU
and select “X4”, then press SET. Now,
repeat Step 3.
You can change the viewing area in a
zoomed image with 
 .
Displaying the Sub Menu
Enlarging an Image (ZOOM)
To return image to normal size:
Select “RETURN” from the zoom
menu, then press SET.
Repeat above if image is X4.
To delete the image:
aSelect “DELETE” from the zoom
menu, then press SET.
bPress   to select “YES”, then
press SET. With a full screen index or album image
displayed, you can zoom, rotate, add color
effects, and display image information.
Press MENU to display the sub menu for
function selection.
Selecting “RETURN”, then pressing SET
redisplays the index or album.
Sub menu functions are described on pages
39~41.
Before operating any function, press MENU for Sub Menu.
Images can be displayed 2 or 4 times their normal size.
Selecting “RETURN” redisplays previous menus, one by one.
To temporarily exit the sub menu, press MENU. Pressing MENU again displays the menu
previous to the one just exited.
Some images appear grainy when enlarged.– Note –
PT1.p38-41.p652003/01/14, 12:37 39 
						

							40
TV Mode (Full Screen Playback)
M
CANCEL
ENU
/SET
MENU
SET
1Press  to select “ROTATE” from
the sub menu, then press SET.
(p. 39)
2Press   to select “LEFT” or
“RIGHT”, then press SET.
LEFT: image is rotated 90°
counterclockwise.
RIGHT: image is rotated 90° clockwise.
Rotating an Image (ROTATE)
To save rotated images:
Select “SAVE” from the rotate menu,
then press SET.
Image will hereafter be displayed in the
saved form.
Selecting “RETURN” redisplays previous menus, one by one.
To temporarily exit the sub menu, press MENU. Pressing MENU again displays the menu
previous to the one just exited.
MOV files and some other types of rotated image files cannot be saved.– Note –
(When “LEFT” is selected)
PT1.p38-41.p652003/01/14, 12:37 40