Panasonic Software DP-1510P/1810P/1810F/2000/2010E/2500/3000 Operating Instructions

Configuring the Printer Driver Settings
41
Printer Section
To change the printer settings, open the dialog box for the printer properties by the following steps.
NOTE1. In Windows NT 4.0, setting properties depends on the log-in account. This section describes
properties to be specified by a user, upon executing a print operation on an application. See
Configuring the Printer Driver Settings (Administrator) for details of administrator properties.
(See page 33)
Windows NT 4.0 (User)
1
Select Print in the...

Configuring the Printer Driver Settings
42
Windows NT 4.0 (User)
Paper/Layout Tab
1.Paper Size
Select a document size.
2.Paper Source
Specify where the paper you want to use is located in the machine. If you choose Auto Selection, the
printer driver will automatically select an appropriate tray according to the Paper Size.
3.Orientation
Select the print orientation (Portrait/Landscape).
4.Copies (1-999)
Specify the number of copies to be printed. If the number of copies to be printed can be specified...

Configuring the Printer Driver Settings
43
Windows NT 4.0 (User)
Printer Section
6.Magnify
Select a fixed enlargement/reduction ratio according to the paper size. Specifying the magnification ratio
changes the Zoom to display the actual enlargement/reduction percentage.
7.N in 1
Specify the layout pattern for printing multiple documents on a single sheet of paper.
Selecting 2 in 1 or 4 in 1 changes the Zoom to display the actual enlargement/reduction percentage.
Note: 2 in 1 or 4 in 1 allows the user to...

Configuring the Printer Driver Settings
44
Windows NT 4.0 (User)
Handling Tab
1.Sorter
Select whether to Stack or Sort when printing multiple copies.
Note 1) When the Staple is set to On, the Rotate-Sort and Shift-Sort is not activated even if it is
selected.
2) Shift-Sort is not available on DP-1510P/1810P/1810F/2010E.
2.Printing on both sides (Duplex) (For DP-2000/2010E/2500/3000)
Select duplex printing for printing on both sides.
Note 1) Duplex Printing is allowed only when the Dual-Path Exit Guide...

Configuring the Printer Driver Settings
45
Windows NT 4.0 (User)
Printer Section
6.Staple (For DP-2000/2500/3000)
Specifying staple printing is allowed if the output bin is set to outer.
Note 1) Staple printing is allowed only with Electronic Sorting Board (DA-ES200 : For DP-2000 only) and
1-Bin Finisher (DA-FS200) mounted.
2) Select Sort in the sort menu.
3) Paper is stapled at the top left or at the top right. (See table below.)
Document orientation Paper orientation  Stapling position
Letter
A4...

Configuring the Printer Driver Settings
46
Windows NT 4.0 (User)
7.Security Print (For DP-1810F/2000/2500/3000)
Select to enable Security Print.
Note: Security print is allowed only when the security print password is set 
on the Device Options Tab.  (See page 39)
8. button
Return all items in the window to standard settings (default).
9. button
Displays the version information about the printer driver.
Restore Defaults
About... 

Configuring the Printer Driver Settings
47
Windows NT 4.0 (User)
Printer Section
Quality Tab
1.Resolution
Select the printer resolution (300dpi/600dpi).
2.Text Color
Select the print control of colored text.
Print all text as black
All colored text is printed as solid black.
Print colored text with halftone
Colored text is printed using shades of gray.
3. button
Return all items in the Quality Tab to standard settings (default).
4.  button
Displays the version information about the printer driver....

Configuring the Printer Driver Settings
48
Windows NT 4.0 (User)
Fonts Tab
1.Use printer fonts instead of TrueType fonts
Prints using printer fonts, substituting for the TrueType fonts used in the original document.
The substituting printer font can be set with the Font Substitution Table.
2.Always use TrueType fonts
Always uses TrueType fonts without substituting them with printer fonts.
3. button
Return all items in the window to standard settings (default).
4. button
Displays the version information...

Configuring the Printer Driver Settings
49
Printer Section
To change the printer settings, open the dialog box for the printer properties by the following steps.
NOTE1. In Windows 2000/XP, setting the properties depends on the log-in accounts. This section
describes properties to be specified by an administrator (system manager). See Configuring
the Printer Driver Settings for details of user properties. (See page 58)
Windows 2000/XP (Administrator)
1
Log onto the computer/network with an account rights...

Configuring the Printer Driver Settings
50
Windows 2000/XP (Administrator)
General Tab
1.Printer Name
Name of the printer specified upon installation is displayed.
2.Location and Comment
Enter a comment about the location of the printer installation and information about the printer.
If a printer is shared, the location and comment specified in this field appears when another user sets up
this printer on his/her computer. After completion of setup, however, changing this comment does not
update the...