Panasonic Software DP-2310/3010/3510/3520/4510/4520/6010/6020 Operating Instructions

							Configuring the Printer Driver Settings
51
Windows 98/Me
Printer Section
Details Tab
1.Print to the following port
Displays either the port where the printer is connected or the path to the network printer.
To change the printing destination, either select the printing destination port from the list or enter the
network path here.
2. /   button
Adds/deletes new port or new network path.
3.Print using the following driver
Displays the type of the printer driver. Specify the printer being used or a printer model which can be
emulated with the printer being used.
4. button
Updates or modifies the printer driver.
5. /   button
Assigns a local port to the network connected printer or cancels a local port assigned to the network
printer.
6.Timeout settings - Not selected (For LPT Port only)
Specify the amount of time (in seconds) allowed to elapse before the printer comes online. If the printer is
not online within this duration, an error message will be displayed.
Add Port...Delete Port...
New Driver...
Capture Printer Port...End Capture...
Continued on the next page... 
						

							Configuring the Printer Driver Settings
52
Windows 98/Me
7.Timeout settings - Transmission retry (For LPT Port only)
Specify the amount of time (in seconds) allowed to elapse before the printer is ready for printing. If the
printer is not ready for printing within this duration, an error message will be displayed.
Increase this value if a timeout error occurs when printing a large document.
8. button
Specify the method of sending (spool) documents from the program to the printer.
•Spool Data Format
Select spool data type (RAW format). Specifying RAW format results in a longer time elapsing before an
application becomes operational after printing from it.
•Enable bidirectional support (The feature is not available with this model.)
Be sure to check the check box for Enable bidirectional support. Otherwise, status information
reception may not function properly.
9. button
Modifies printer port settings.
Spool Settings...
Port Settings... 
						

							Configuring the Printer Driver Settings
53
Windows 98/Me
Printer Section
Sharing Tab
1.Not Shared/Shared As
Select whether to display or share this printer with other computers.
2.Share Name
Specify the name of the shared printer. The displayed name can be used as it is or a new name may be
entered. The name specified here will be displayed when other users view information about the printer
on the network.
3.Comment
You can enter comments regarding a shared printer (such as the type of printer and the location where it
is installed). When other users view information about the printer on the network, the comment specified
here will be displayed.
4.Password
Specify a password required when other users will connect to this printer. 
Leave the box blank in order not to use any password.
NOTE1.Sharing Tab in property dialog box is not displayed unless printer sharing has been specified. 
						

							Configuring the Printer Driver Settings
54
Windows 98/Me
Paper Tab
1.Paper size
Select a document size.
2.Orientation
Select the print orientation (Portrait/Landscape).
3.Paper control
Controls printer outputs and groups pages. 
Select Collate if you wish each set of multiple copies collated when you print them. Otherwise, each page
is printed in individual groups. 
The Duplex menu specifies whether and how the printer should print the document on both sides of the
paper.
4.Paper source
Specify where the paper you want to use is located in the device.  If you choose Auto Select Tray, the
printer driver will automatically select an appropriate tray according to the Paper Size selected.
5.Output bin
Specifies which output bin to use for your printed document. Some printer models have more than one
output bin you can use for sorting your documents.
6.Paper type
Specifies the type of paper medium to use, such as plain or thick.
7. button
Displays the Margins dialog box. Click this button to view the area of the page that is unavailable for
printing.
Margins... 
						

							Configuring the Printer Driver Settings
55
Windows 98/Me
Printer Section
8. button
Displays version and copyright information for this printer driver.
9. button
Displays the help window for this printer driver.
10. button
Sets the values of all options in the current dialog box to the default values specified in the PPD file.About...
Help
Restore Defaults 
						

							Configuring the Printer Driver Settings
56
Windows 98/Me
Graphics Tab
1.Resolution
Select the resolution you want for printing (300dpi/600dpi/1200dpi Enhanced).
2.Special
Prints a negative image and/or mirror image of your document. Click these options to view an example.
3.Paper handling
Specify the layout pattern for printing multiple documents on a single sheet of paper and whether page
borders are used.  Select these options to view an example.
4.Scaling (25-400%)
Specify an enlargement or reduction percentage when printing documents.  If enlargement/reduction can
be set within the application, indicate 100% here and specify the enlargement/reduction percentage in
the Print dialog box of the application.
5.Convert gray text/graphics to PostScript gray
This feature is not available on your machine.
6. button
Displays the help window for this printer driver.
7. button
Sets the values of all options in the current dialog box to the default values specified in the PPD file.
Help
Restore Defaults 
						

							Configuring the Printer Driver Settings
57
Windows 98/Me
Printer Section
Fonts Tab
1.Substitute printer fonts for TrueType fonts when applicable
Tells the driver to determine which PostScript fonts to substitute for TrueType fonts.
Instead of sending all TrueType fonts to your printer, this option substitutes a PostScript printer font for
the common TrueType fonts used in your document.
By default, common TrueType fonts are substituted with their PostScript look-alikes when printing, but
those with no PostScript look-alike font are sent to the printer in the format specified in the Send
TrueType Fonts As box of the Send Fonts As dialog box.
2.Do not use printer fonts
Disables using printer-resident fonts. Use this advanced option when you expect to send the PostScript
output to different printer models.
3.Add Euro Currency Symbol to PostScript Fonts
Adds the European currency symbol to most PostScript fonts.
4. button
Updates the list of PostScript fonts that have been downloaded to the printer so that the driver prints them
correctly.
5. button
Displays the Send Fonts As dialog box. Click this button to specify how to send TrueType or PostScript
fonts.
6. button
Displays the help window for this printer driver.
7. button
Sets the values of all options in the current dialog box to the default values specified in the PPD file.
Update Soft Fonts
Send Fonts As...
Help
Restore Defaults 
						

							Configuring the Printer Driver Settings
58
Windows 98/Me
Device Options Tab
1.Available printer memory
Specifies the amount of available printer memory. The driver uses this information when performing
printing tasks, such as sending fonts from the computer to the printer.
2.Available font cache
Displays the amount of font cache memory now available to Type 32 fonts (bitmap font format).  The
Driver automatically adjusts the font cache size according to the installed memory option selected in the
Installable options box.
3.Printer features
Specifies the following printer settings:
•Sort
Select whether to Stack or Sort when printing multiple copies.
  
						

							Configuring the Printer Driver Settings
59
Windows 98/Me
Printer Section
•Staple
Select the staple position. Available if the optional Finisher (DA-FS300, FS330, FS355, FS600 or
FS605) is installed. Available for up to 30 sheets (Letter/A4).
Portrait (Top Left / Left / Top Right / Right)
Landscape (Top Left / Top Right / Top)Portrait (Saddle Stitch)
Landscape (Saddle Stitch)
For DA-FS330, 355, 600 or 605
For DA-FS300
Portrait (Top Left /Top Right)
Landscapet (Top Left /Top Right) 
						

							Configuring the Printer Driver Settings
60
Windows 98/Me
•Punch (For DP-3510/3520/4510/4520/6010/6020 only)
Select the punch position. Available if the optional Punch Unit is installed.
•Secure
Select the Mailbox or Secure Mailbox if storing the print data into the mailbox of the machine. Available
if the optional Hard Disk Drive Unit (DA-HD30/HD60) is installed.
Note: The PS Driver Security Utility must be installed in order to use the user ID password.
•Print Blank Pages
Select whether the blank pages are printed or not.
•Tray Switching
Allow the paper to be fed continuously if the same size of paper is loaded in another paper tray (Auto
Tray Switching). If not selected, the machine will stop if paper runs out in the chosen paper tray.
•Front Cover Page
Set to insert a blank page as the Front Cover. Specify where the paper you want to use is located in the
device. If you choose Auto Tray Selection, the printer driver will automatically select an appropriate tray
according to the Paper Size selected.
•Back Cover Page
Set to insert a blank page as the Back Cover. Specify where the paper you want to use is located in the
device. If you choose Auto Tray Selection, the printer driver will automatically select an appropriate tray
according to the Paper Size selected.
•Duplex Notice (For DP-2310/3010 only)
Check whether 2-Sided Print is printed on the footer of 1st page when printing with 2-Sided Page
Style.