Panasonic Sonic Vibration Toothbrush Ew Dl80 Operating Instructions

							IMPORTANT SAFEGUARDS
When using electrical products when\, children are 
present, \fasic safety precautions sho\,uld always \fe 
followed including the f\,ollowing:
READ ALL INSTRUCTIONS BEFORE USI\nNG 
DANGER
In \frder \b\f reduce \bhe risk \n\ff elec\br\fcu\bi\fn:
\b.
 Do not place or st\,ore the charger wh\,ere it can f
all 
or \fe pulled into a\, tu\f or sink.
2.
 Do not place the c\,harger in w

ater or other liqu\,id.
3.
 Do not reach f

or a charger that \,has fallen into 
water. Unplug immediately.
4.
 Do not w

ash the charger.
5.
 Do not use while \fa\,thing.
WARNING
T\f reduce \bhe risk \ff b\nurns, elec\br\fcu\bi\fn, fire \fr 
injury \b\f pers\fns:
\b.
 This appliance is \,not intended f

or use \fy children 
or persons with re\,duced physical or mental 
capa\filities, unless they are supervised \fy a 
person responsi\fle for their safety.
2.
 Use this product o\,nly f

or its intended us\,e as 
descri\fed in this manual. Do not use attach\,ments 
not recommended \fy the manufacturer.
3.
 K

eep cord away from heated surfaces.
4.
 Ne

ver drop the applia\,nce or insert any o\fject into 
any opening of the ap\,pliance.
5.
 Ne

ver operate this product i\,f it has \feen dropp\,ed 
or damaged, or if it\, is not working properly. If any 
of these occur, please contact a service center and 
return the product for examination and repa\,ir.
6.
 If the product is \,dropped, the \fr

ush head should 
\fe replaced \fefore the next use even if no damage 
is visi\fle.
7.
 This appliance is \,pro

vided with a charg\,er with 
integrated Safety Extra Low Voltage power supply. 
Do not exchange or manipula\,te any part of it 
otherwise there is\, the risk of electric shock. 
Periodically check the charger for damage. A 
damaged or non-func\,tioning appliance \,should no 
longer \fe used. Take it to a service center.
8.
 Ne

ver use while drowsy.
9.
 Do not use outdoor\,s or oper

ate where 
aerosol(spray) products are \fei\,ng used or where 
oxygen is \feing admin\,istered.
IMPORTANT
\b. Do not touch the p\,o wer plug with wet hands. This 
can cause an elect\,ric shock.
2.
 When unplugging, al\,w

ays hold the power plug 
instead of the cor\,d.
3.
 Do not modify the pr\,oduct.

 Do not disassem\fle or 
repair. This may cause fire, electric shock or injury. 
Consult your dealer for repairs or cont\,act a service 
center. Do not disassem\fle the product except 
when disposing of \,the \fattery.
4.
 When taking out th\,e \fatter

y for disposal, use 
caution not to sho\,rt the positive (+) and negative 
(–) terminals.
5.
 This product is no\,t intended f

or use \fy children.
CAUTION
If you are undergoing \,treatment for any oral care 
condition, consult \,your dental professional prior to use.
SAVE THESE INSTRUCTIONS
Operating Instructions
(Household) Sonic Vi\fration Tooth\frush
Model No. EW-DL80
Before operating this unit, pl\,ease read these in\,structions 
completely and save them for future use.
In\br\fduc\bi\fn
►	F\fr y\fur pers\fnal den\bal care
Thank you for purchasing the \,Panasonic Sonic Vi\fration 
Tooth\frush.
The Sonic Vi\fration Tooth\frush is a new kind of electric 
tooth\frush designed for those who wish \,to keep their teeth 
clean and healthy. This appliance wil\,l ena\fle you to maintain 
good dental hygiene, which is as important as other forms of 
personal hygiene.
►	 S\fnic Vibra\bi\fn T\f\f\bhbrush Techn\fl\fgy
The Sonic Vi\fration Tooth\frush incorporates the innovative 
motor technology tha\,t uses magnetic att\,raction and repulsi\,on to 
provide outstanding p\,erformance. The \frush’s 26,000 horizontal 
strokes per minute help remove plaque gently yet effectively.
►	 Bef\fre use
This high
- speed, vi\frating, electric tooth\frush is different from 
conventional electric tooth\frushes.
Therefore:
•	 You only need to lig\,htly press the \fristles against your teeth for 
\frushing.
•	 When first using th\,is appliance, some may experience a 
tickling or tingling \,sensation caused \fy the high
- speed 
vi\frations. The sensation shou\,ld su\fside after you use the 
tooth\frush several more times.
Cau\bi\fns regarding use
•	 Be sure to switch off the appl\,iance and remove the plug from a 
household outlet \fe\,fore performing any maintenance. Failure to 
do so may result in electric shock.
•	 Cleaning and user \,maintenance should \,not \fe made \fy children.
•	 Keep the appliance \,away from children.
•	 Do not use the cha\,rger in the \fath. Doing so may result in 
electric shock.
•	 Do not touch or pu\,ll out the plug wi\,th wet hands. Doing so may 
result in electric shock.
•	 If the power cord of the cha\,rger is damaged, the\, entire charger 
should \fe discarded\,. The charger should\, \fe replaced.
•	 Do not wrap the power cord around the\, charger.
•	 Always ensure the appli\,ance is operated on an electric power 
source matched to i\,ts rated voltage. Failure to do so may result in 
fire or electric shock.
•	 Clean the plug per\,iodically so that d\,ust does not accumulate in it. 
Such dust \fuildup may trap moisture over time and reduce \,the 
effectiveness of the insul\,ation, thus resulti\,ng in overheating and 
fire.
•	 Do not modify, disassem\fle, or repair the app\,liance at any time 
except when disposi\,ng of it. Doing so may result in fire, electric 
shock, and/or \furns.
•	 Do not place any metal o\fjects, such as coins and\, clips, on the 
charger. Doing so may cause the o\fjects\, to heat up, resulting in 
\furns.
Par\bs iden\bifica\bi\fn

 





 


A Main unit
1  T ooth\frush shaft
2
 
W
 aterproof ru\f\fer seal
3
 
P
 ower switch [0/\b]
4
 
Charge status lamp
B

 
Charger (RE8
 - 50)
5
 
Charging section
6

 
Br
 ush stand
7
 
Charger co
 ver release 
\futton
8
 
Charger co
 ver
9
 
P
 ower cord Access\fries
C
 T riple - edged \frush
:
 
Br
 istles
;
 
Identification r
 ing
S\b\fre and Charge
S\b\fring and charging \bhe \b\f\f\bhbrush
You can fully charge\, the tooth\frush in \b5 hours.
A full charge will\, supply enough power for 40 minutes use.
1
1Pass \bhe p\fwer c\frd \bhr\fugh 
\fne \ff \bhe c\frd guides \fn \bhe 
righ\b \fr lef\b.
2
2Turn \fff \bhe main uni\b.\n
3
3Place \bhe main uni\b up\nrigh\b \fn \bhe 
charger and plug \bhe p\fwer c\frd in\b\f 
a h\fuseh\fld \fu\ble\b.
•	
The charge status \,lamp glows and the chargin\,g will start.
•	 The charge status \,lamp does not go of\,f even after the tooth\,\frush 
is fully charged.
•	 The tooth\frush charges whenever it is placed in\, the charger.
•	 Adequate am\fient tem\,perature for charging is 0  -  35   °C (32  -  95   °F).•	The main unit may \fecome warm during use and chargi\,ng. 
However, this is normal.
•	 Do not use any charger other tha\,n this charger (RE\,8
- 50).
•	 When charging the \,tooth\frush for the first time, or when it has 
not \feen in use for more than 6 month\,s, the charge status\, lamp 
may not glow for a few minutes, or the operating time may 
shorten. Please charge it \,for more than 23 hou\,rs in such cases.
•	 The operating duration will \fecome sh\,orter as the \fattery gets 
older.
•	 If the tooth\frush operates only for a short time after \feing f\,ully 
charged, this means \,that the \fattery is nearing the end of its\, life 
cycle. Take the unit to an a\,uthorized service center to have the 
\fattery replaced.
F EN
IN USA CONTACT:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Service • Assis\bance • \nAccess\fries
Call 1-800-338-0552 \n(In USA)
h\b\bp://www.panas\fnic.c\fm/c\fnsum\nersupp\fr\b/
Manufactured for
Panasonic Corporation
33, Okamachi, Hikone, Shiga, Japan
Printed in Thailand
XX0000XX000X  X000\,0-0
© Panasonic Corporation 2012
EW-DL80_US.indb   12012/07/23   13:04:18  
						

							►	M\fun\bing \bhe charger \b\f \bhe wall
\b. Attach tw o screws to 
the wall as illustrated.
•	 Please \fe careful a\,s 
to not drill a ca\fle or 
water pipe in the w\,all.
2.5mm
28mm
•	Screws and anchors are\, sold separately. Use no. 6 \fy \b in. 
round head screws when fixing to w\,ood; or no. 4
- 6 Molly or 
Anchor \folts when fi\,xing to Sheet rock.
2.
 Hook the charger o\,nto these scre

ws.
3.
 Plug the po

wer cord into a hou\,sehold outlet.
Use
Using \bhe \b\f\f\bhbrush
1
1Place \bhe brush head fi\nrmly 
\fn\b\f \bhe \b\f\f\bhbrush sha\nf\b.
•	
There will \fe a smal\,l gap \fetween 
the \frush head and the ma\,in unit.
2
2Place \bhe \b\f\f\bhbrush in\n y\fur 
m\fu\bh bef\fre \burning i\b \fn.
•	
Apply a small amount\, of toothpaste 
to the \frush head, if desire\,d, \fefore 
turning the power on to prevent the 
toothpaste from spa\,ttering.
3
3Turn \bhe p\fwer swi\bch \b\f “1” p\fsi\bi\fn \b\f 
\burn \fn \bhe main uni\b.
4
4Turn \fff \bhe main uni\b \nwhen y\fu have finished 
brushing.
•	 Turn off the main unit\, \fefore removing it from your mouth to 
prevent foam from spattering.
►	 Precau\bi\fn
•	 When you first \fegin using\, the tooth\frush, you may 
experience slight \fleeding of the gums\, even though your gums 
may \fe healthy. This is \fecause your gums are receiv\,ing 
stimulation \fy the tooth\frush for the first time. The \fleeding 
should stop after \,one or two weeks of use. Bleeding that 
persists for more than two weeks may \fe indication of \,an 
a\fnormal condition of your gums, such as pyorrhea. In this 
case, stop using the to\,oth\frush and consult your dentist.
•	 Recommended am\fient t\,emperature for using is 0
 -  35   °C 
(32
 -  95   °F).
•	 Do not allow hair products (e\,.g., gel or oil) or\, hand lotion to 
come in contact wit\,h the unit as they may damage its surface.
Tips \fn usage
►	 Triple - edged brush
Brush carefully \fetween teeth or aroun\,d teeth that 
are not straight.
Place the \fristles of the \frush gently against \,your 
teeth.
►	 Fr\fn\b \bee\bh, and be\bween \bee\bh and gu\nms
Place the \fristles at 45˚.45
►	 Brush \bhe chewing surface \ff \bee\bh
Brush at a 90˚ angle\,.
►	 Brush \bhe back \ff \bee\bh \fr where \bee\b\nh are n\f\b s\braigh\b
Brush vertically.
Move the tooth\frush to match the an\,gle of teeth.
Af\ber use
Cleaning \bhe main uni\b \nand \bhe brush head
►	 Main uni\b
\b. T urn off the main unit\,.
2.
 Remo

ve the \frush head from the ma\,in unit.
3.
 W

ash the main unit u\,nder running water.
•	 Do not ru\f or damage the waterproof ru\f\fer 
seal. 
•	 Do not immerse the ma\,in unit under water.
•	 Do not wash with water hotter than 4\,0
  ˚C 
(\b04
  ˚F).
►	Brush head
\b. T urn off the main unit\,.
2.
 Remo

ve the \frush head from the ma\,in unit.
3. Wash the \frush head under running water.•	Shake well to remove water after washing.
•	 Do not pull the \fristles of the \frush head.
•	 Do not wash with water hotter than 8\,0
  ˚C 
(\b76
  ˚F).
•	 Do not shake the main unit str\,ongly with the 
\frush head attached.\,
►	 Af\ber washing wi\bh w\na\ber
\b. Wipe dr y with a cloth.
•	 Do not charge whil\,e it is wet.
2.
 Retur

n the main unit and\, the \frush head to the 
charger.
•	 It is recommended to\, place the \frush head 
facing toward the \fack of the charger w\,hen 
placing the \frush head on the ch\,arger.
►	 If \bhe iden\bifica\bi\fn ri\nng c\fmes \fff
Put the identificat\,ion ring \fack on.
•	 Do not forci\fly pull the identifi\,cation ring 
since it can \freak \,easily.
•	 Using the tooth\frush without the 
identification ring has no effect on its 
performance. The ring is simply for user 
identification purposes.
Af\ber use
Main\benance
►	 Charger
\b. Pull the charger c\,o ver while pressing \,
the charger cover release \futton.
2.
 Wipe off an

y dirt on the charger a\,nd 
the charger cover using a soft cl\,oth.
3.
 Wipe the prongs of\, the plug with a d\,r

y 
cloth a\fout once every 6 months.
Rem\fving \bhe Ni-MH ba\b\bery bef\fre disp\fsing \ff \bhe p\nr\fduc\b
WARNING
Do not disassem\fle the product at \,any time other than wh\,en 
disposing of it. Failure to o\fserve this point may result in short 
circuit, fire, or injury.
For repair or mainte\,nance (such as \fatt\,ery replacement), take 
the product to an \,authorized service center.
ATTENTION:
A nickel metal hydride \fattery that is recycla\fle powers the 
product you have purchased. Please call \b-800-\,8-BATTERY for 
information on how to recycle this \f\,attery.
•	 Before removing the \fattery, \fe sure to complet\,ely drain the unit 
of power.
•	 Use a screwdriver to loosen the s\,crew on the \fottom of t\,he 
product.
•	 Perform steps 1 to 7, and then remove the \fattery.
•	 Be careful not to \,short-circuit the nega\,tive and positive poles of 
the \fattery.





 
Specifica\bi\fns
Related voltage:
See the name plate \,on the product.
(Automatic voltage conversion)
Battery: \b Ni
- MH \fattery (\b.2  
V; \b\b00 mAh)
Charging time:
 approx. \b5 hours
Changing \bhe brush h\nead (S\fld separa\bely)
Replacing the \frush head every 3 months is recomme\,nded.
If the \fristles are \fent to \,one side or worn, the tooth\frush is not 
effective for \frushing. Replace the \frush head with a ne\,w one.
Part num\fer Replacement Brush for EW- DL80 Quantity
WEW0927 Triple
- edged 
\frush
3
WEW0933 Silicon \frush *\b
\b
Point \frush *2
\b
WEW09\b\b V
-

shaped \frush
3
*\b
 
Silicon r

u\f\fer provides gums with gen\,tle and comforta\fle 
stimulation.
*2
 
The conical \fr

ush-end easily reac\,hes \fetween teeth and 
cleans the misalign\,ed-tooth area.
FOR YOUR CONVENIENCE, WE HAVE ESTABLISHED A 
TOLL
- FREE (IN USA ONLY) NATIONAL ACCESSORY 
PURCHASE HOT LINE AT 1-800-332-5368.
EW-DL80_US.indb   22012/07/23   13:04:21