Panasonic System Controller Wv Cu360c Operating Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.WV-CU360C
System Controller
Operating Instructions
System Controller WV-CU 
360C
O
PER
A
TE
LO
G
IN
A
LAR
MM
O
N
IT
O
R
U
N
IT
C
AM
ER
ABU
S
YPR
O
H
IBITE
D
S
H
IFT
FU
N
C
T
IO
NC
AM
 FU
N
C
TIO
NP
RO
G
R
AM
ALM
 R
E
SE
T
V
C
R
     C
AM
MULTI SCREEN SELECT
STILL
–
SEQ PAUSESEQUENCE
SLOW
PATROL
LEARN
PROGRAM
PRESET
PATROL
STOPESC
SET
LOGOUT MONCAM
PATROL PLAY
+A
U...

2
The serial number of this product may be found on the bot-
tom of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No.
Serial No.
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
The lightning flash with arrowhead sym-
bol, within an equilateral triangle, is
intended to alert the user to the pres-
ence of...

3
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or...

4
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS  ............................ 3
PREFACE .......................................................................... 5
FEATURES ........................................................................ 5
PRECAUTIONS ................................................................. 5
MAJOR OPERATING CONTROLS & THEIR FUNCTIONS .... 6
Rear View & AC Adapter ............................................ 6
INSTALLATIONS...

5
PREFACE
The System Controller WV-CU360C is designed for setup
and operation of cameras and other system units installed
in a surveillance system.
The controller is compatible with the Panasonic Security
Data (PS
•Data) protocol by default, but DIP switches are
provided to select the conventional communication protocol
used with the Video Multiplexer WJ-FS616C, Matrix
Switcher WJ-SX350 or WJ-SX850.  Exchangeable templatesare supplied to adapt the names printed on the buttons to
the functions of the unit...

6
MAJOR OPERATING CONTROLS & THEIR FUNCTIONS
Rear View and AC Adapter
DC 9V IND ATA MODE
RISK OF ELECTRIC SHOCK. DO  NOT OPENRISQUE DE CHOCS ELECTROUES
NE PAS OUVRIR
0987654321
rte
CONTROLLER No.
w
q
qController Number Switch (CONTROLLER No.)
This switch is used to assign a controller number to the
System Controller to identify it in a system comprising
multiple System Controllers (See page 14). A system
may comprise up to four controllers.
wMode Selection Switches (MODE)
The DIP switches are used to...

7
INSTALLATIONS
Template Mounting
The system controller is provided with four templates
including one for PS
•Data system that is placed (not taped
yet) on the surface of the controller when shipped from the
factory.1. Select the correct template for your system.
• Select the PS
•Data template when your system
includes any of the following:
Video Multiplexer (WJ-FS309/316)
Digital Disk Recorder (WJ-HD100/500A)
Data Multiplex Unit (WJ-MP204C)
• Select the template marked “For Multiplexer” if your
system...

8
Rear Panel Switch Setting (Summary)
An 8-bit DIP switch and a rotary switch mounted on the rear of the controller specify the system unit ID and parameters for
communication. Switch settings depend on your system configuration such as a PS
•Data system, WJ-FS616C Multiplexer sys-
tem, WJ-SX350 Matrix Switcher system or System 850. A summary of switch positions is shown below.  For detailed information
refer to the description of switch settings provided for each system.
MODE
1 234 5678
OFF...

9
Panasonic Security
Data (PS
•Data) Systems 

10
MAJOR OPERATING CONTROLS & THEIR FUNCTIONS
Front View (Template for PS•Data)
qOperate indicator (OPERATE)
Is lit while power is supplied to the System Controller.
wLogin indicator (LOGIN)
Lights up when communication is established with
PS
•Data compatible system units.
eAlarm indicator (ALARM)
Blinks when an alarm is activated.
Blinking changes to steady light when the alarm is auto-
matically reset.
To turn the indicator off, press the Alarm Reset button.
rMonitor/Unit indicator ( MONITOR/ UNIT)...