Panasonic System Controller Wv Cu550cj Operating Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.WV-CU550CJ
System Controller
Operating Instructions
ALARM
  ACK
RESET
  AUX
 DEC
-1CAM INC
+1CAM
STOP
S
LO
W
E
S
C
S
E
T M
O
N
C
A
M
W
ID
E
F
A
RAFZ
O
O
M
T
E
LEF
O
C
U
S
 N
E
A
R R
E
S
E
TIR
IS
1
2
3
4
5
6
7
8
09
C
L
O
S
E
    O
P
E
N
1            2
BACK
 SEQFORWARD   SEQ
ALT
BUSY
F1
F2
F3
F4
System Controller WV-CU           CJ
550
ENGLISH
FRANÇAIS 

2
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS  ........................................................................................................................................ 3
PREFACE ...................................................................................................................................................................................... 4
FEATURES...

3
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or...

4
PREFACE
The WV-CU550CJ System Controller, when combined with the optional WJ-SX550C Matrix Switcher and WJ-AD550 Extension
Unit, allows for flexible control of 128 cameras and 16 monitors.
When used in a system with either Receivers (WV-RC100 or WV-RC150) or with Panasonic’s Combination cameras, the WV-
CU550CJ can control camera functions such as zoom and focus and can also control accessory equipment such as Pan/Tilt
Heads.
In addition, the WV-CU550CJ can control sequential switching in systems...

5
PRECAUTIONS
•Refer all work related to the installation of this
product to qualified service personnel or system
installers.
•Do not attempt to disassemble the appliance.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Contact
qualified service personnel for maintenance.
•Handle the appliance with care.
Do not strike or shake it, as this may damage the appli-
ance.
•Do not expose the appliance to water or moisture,
nor try to operate it in wet...

6
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■Front View
System Controller WV-CU           CJ550
ALARMBUSY
F1F2
SETWIDE AF
ZOOM
TELE
ESC SLOWALT BACK
SEQ ACK
RESET
FORWARDSEQ
DEC
-1CAMAUXINC
+1CAMSTOP 2 1
F3F4
123
456
789
MON0CAM
CLOSE
OPEN IRIS
PRESET
FAR FOCUS
NEAR
qwrt
y
i!0!3!4!5!6!7!8!9 @2!1!2o
e
u
@3 @1 @0
CONTROLLER CONTROLLER
UNIT No.
1-8MODE DATA
TERM.
ON
ON OUT
OFFOFFIN
5432109876
@4@5@6@7@8@9
■Rear View 

7
qAlarm Indicator (ALARM)
Blinks to indicate that an alarm condition exists.
It changes to steady light when the alarm is reset auto-
matically.
To turn the indicator off, press the ACK RESET button.
wBusy Indicator (BUSY)
Lights up when you attempt to control a monitor or a
camera that is already used by a higher priority opera-
tor, or when the higher priority operator selects the
monitor or camera you are currently operating.
Operations from the System Controller are disabled
until this indicator...

8
!8Decrement Button (DEC –1CAM)
When a sequence running in forward direction has
been paused with the STOP button, pressing this button
will move the sequence one frame to the previous step
(in forward run direction). If the sequence was running
in reverse direction, the button will move the sequence
one frame to the previous step (in reverse run direc-
tion).
This button is also used to select a camera. Pressing
this button will replace the currently selected camera
with the next lower camera number,...

9
■System Controller for the WJ-FS616 Series Video Multiplexer
When combined this System Controller with the optional WJ-FS616 Series Video Multiplexer, place the display sheets and label
on the controller shown below.
Refer to the Operating Instructions of WJ-FS616 Series for further details.
Note:Locate the System Controller in a level place.
INSTALLATION
ALAR
M
  ACK
RESET
  AU
X
 DEC
-1CAM INC
+1CAM
STO
P
SLOW
ESC
SET MON
CAM
WIDE
FARAFZOOM
TELEFOCUS
 NEAR RESETIRIS
1
2
3
4
5
6
7
8
09
CLOSE    OPEN
1...

10
SYSTEM INFORMATION
Please note that the following functions were added to
improve the operation of the combination cameras.
■Additions
●Selection of Pan/Tilt Speed 
The Pan/Tilt speed can be changed by selecting a mode in
the menu (A1) displayed on the LCD display of the con-
troller.
1. Select the desired monitor and camera.
2. Select a mode by pressing the F3 or F4 button.
“❑” indicates the currently selected mode.
SLW:Moves the Pan/Tilt Head at lower speed.
FST:Moves the Pan/Tilt Head at higher...