Panasonic Th 103pf10wk Operating Instructions

Please read these instructions before operating your set and retain them for future reference.Model No.
Operating Instructions 
High De nition Plasma Display
English
The illustration shown is an image.
TH-103PF10WK
TH-103PF10WL
TQBC2235-2
 

2
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of 
enjoyment from your new Plasma Display.
To obtain maximum benefit from your set, please read these Instructions before making 
any adjustments, and retain them for future reference.
Retain your purchase receipt also, and note down the model number and serial number of 
your set in the space provided on the rear cover of these instructions.
Visit our Panasonic Web Site...

3
IMPORTANT INFORMATION
If a display is not positioned in a suf ciently stable location, it can be potentially hazardous due to falling. Many 
injuries, particularly to children, can be avoided by taking simple precautions such as:
•  Using cabinets or stands recommended by the manufacturer of the display.
•  Only using furniture that can safely support the display.
•  Ensuring the display is not overhanging the edge of the supporting furniture.
•  Not placing the display on tall furniture (for example,...

4
Safety Precautions
WARNING 
 Setup
This Plasma Display is for use only with the following optional accessories. Use with any other type of optional 
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation.)
Always be sure to ask a quali ed technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard 
unneeded...

5
Safety Precautions
 When using the Plasma Display
The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz.
Do not cover the ventilation holes.
•  Doing so may cause the Plasma Display to overheat, which can cause  re or damage to the Plasma Display.
Do not stick any foreign objects into the Plasma Display.
•  Do not insert any metal or  ammable objects into the ventilations holes or drop them onto the Plasma Display, as 
doing so can cause  re or electric shock.
Do not remove the cover...

6
Safety Precautions
   CAUTION
 
 When using the Plasma Display 
Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display.
•  Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands 
or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.
Be sure to disconnect all cables before moving the Plasma Display.
• If the Plasma Display is moved while some of...

+
+
- -
7
Accessories
Power supply cord Fixing bands × 2Batteries for the Remote 
Control Transmitter
(2 × R6 (UM3) Size) Remote Control 
Transmitter
EUR7636070R Operating Instruction book
Accessories Supply
Check that you have the accessories and items shown
Remote Control Batteries
Requires two R6 batteries.
1. Pull and hold the hook, then open 
the battery cover.2. Insert batteries - note correct 
polarity ( + and -).3. Replace the cover.
Helpful Hint:
For frequent remote control users, replace old...

1 2 
AUDIO OUT
RL
AUDIO OUT
RL
SLOT1SERIAL PC    IN
AUDIO
SLOT3
PR/CR/R PB/CB/BY/GAUDIORLCOMPONENT/RGB IN
SLOT2
8
Connections
Note: At factory shipment, Terminal boards are installed in SLOT 2 and SLOT 3.  – Cable  xing bands Secure any excess cables with bands as required.
Pass the attached cable 
  xing band through the clip 
as shown in the  gure.To secure cables connected to Terminals, wrap the cable  xing band around them 
then pass the pointed end through the locking block, as shown in the ...

AUDIO 
PC IN 
1
6 7 8 3
9 4 5
10
15 14 13 12 11
2
9
Notes:
•  Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input 
Terminal.
•  Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning 
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
• The display resolution is a maximum of 1,440 × 1,080 dots when the...

6789 13452
SERIAL
10
SERIAL Terminals connection
Notes:
•  Use the RS-232C cable to connect the computer to the Plasma Display.
•  The computer shown is for example purposes only.
•  Additional equipment and cables shown are not supplied with this set.
The SERIAL terminal conforms to the RS-232C interface speci cation, so that the Plasma Display can be controlled 
by a computer which is connected to this terminal.
The computer will require software which allows the sending and receiving of control data...