Panasonic Th 103pf12u Operating Instructions
Have a look at the manual Panasonic Th 103pf12u Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 31
31
Picture Profi les
Follow these steps to save picture adjustment values as profi les.
Note:
When the settings are locked in “EXTENDED LIFE SETTINGS”, profi les cannot be saved.
Saving profi les
1
Specify the picture quality in the PICTURE menu and
ADVANCED SETTINGS. (see page 28, 29)
2In the PICTURE menu, select “MEMORY SAVE”.
MEMORY SAVEMEMORY LOAD
MEMORY EDIT1 select
2 access
3Select a profi le name for saving the picture adjustment
values.
MEMORY SAVE
1. [ ]
2. [ ]
3. [ ]
4. [ ]
MEMORY2...](http://img.usermanuals.tech/thumb/58/54170/w64_panasonic_th-103pf12u-operating-instructions-30.png "Page 31
31
Picture Profi les
Follow these steps to save picture adjustment values as profi les.
Note:
When the settings are locked in “EXTENDED LIFE SETTINGS”, profi les cannot be saved.
Saving profi les
1
Specify the picture quality in the PICTURE menu and
ADVANCED SETTINGS. (see page 28, 29)
2In the PICTURE menu, select “MEMORY SAVE”.
MEMORY SAVEMEMORY LOAD
MEMORY EDIT1 select
2 access
3Select a profi le name for saving the picture adjustment
values.
MEMORY SAVE
1. [ ]
2. [ ]
3. [ ]
4. [ ]
MEMORY2...")
![Page 32
32
Picture Profi les
Load profi les and apply the picture adjustment values to the display as follows.
Notes:
• Loaded profi les are stored in memory according to the selected input interface (SLOT1, 2, 3 or PC IN). (see page 15)
• When the settings are locked in “EXTENDED LIFE SETTINGS”, profi les cannot be loaded.
1In the PICTURE menu, select “MEMORY LOAD”.
MEMORY SAVEMEMORY LOAD
MEMORY EDIT1 select
2 access
Loading profi les
2
Select the profi le to load.
MEMORY LOAD
1. [ ]
2. [ ]
3. [ ]MEMORY2...](http://img.usermanuals.tech/thumb/58/54170/w64_panasonic_th-103pf12u-operating-instructions-31.png "Page 32
32
Picture Profi les
Load profi les and apply the picture adjustment values to the display as follows.
Notes:
• Loaded profi les are stored in memory according to the selected input interface (SLOT1, 2, 3 or PC IN). (see page 15)
• When the settings are locked in “EXTENDED LIFE SETTINGS”, profi les cannot be loaded.
1In the PICTURE menu, select “MEMORY LOAD”.
MEMORY SAVEMEMORY LOAD
MEMORY EDIT1 select
2 access
Loading profi les
2
Select the profi le to load.
MEMORY LOAD
1. [ ]
2. [ ]
3. [ ]MEMORY2...")
31
Picture Profi les
Follow these steps to save picture adjustment values as profi les.
Note:
When the settings are locked in “EXTENDED LIFE SETTINGS”, profi les cannot be saved.
Saving profi les
1
Specify the picture quality in the PICTURE menu and
ADVANCED SETTINGS. (see page 28, 29)
2In the PICTURE menu, select “MEMORY SAVE”.
MEMORY SAVEMEMORY LOAD
MEMORY EDIT1 select
2 access
3Select a profi le name for saving the picture adjustment
values.
MEMORY SAVE
1. [ ]
2. [ ]
3. [ ]
4. [ ]
MEMORY2
MEMORY3
MEMORY4 MEMORY1
1 select
2 set
Profi les are labeled with these icons to indicate their
locked status. (see page 33)
[ ], [
]:Settings can be saved in this profi le.
[
], []:Settings cannot be saved in this profi le.
4Select “OK”.
MEMORY SAVE
CANCEL SAVE THE ADJUSTED VALUE IN MEMORY1OK
1 select
2 set
5Enter a name for the profi le.
[Entering profi le names]
Profi le names can be up to 16 characters.
To enter text, select characters in the on-screen
keyboard.
Edit the default profile name in the text box as
desired.
MEMORY NAME INPUT
OK AMEMORY1
█B C D E F G H I J K L M ALL DELETE
N O P Q R S T U V W X Y Z DELETE
SPACE abcdefghi jklm
nopq r s t uvwx y z
0123456789
!”#$%&’ +–/=?
_` |~( ) [ ] { } ,@\ ˆ
.;:
CANCEL
1 select
2 set
Example: Specifying “MY PICTURE”
1 Select “ALL DELETE”. MEMORY1█
All text is deleted.
To delete individual characters, select “DELETE”.
2 Select “M”. M█
Repeat this process to enter the next character.
3 Select “Y”. MY█
4 Select “SPACE”. MY █
6When you fi nished entering the profi le name, select
“OK”.
To cancel saving the profi le, select “CANCEL”.
MEMORY NAME INPUT
OK AMY PICTURE
█B C D E F G H I J K L M ALL DELETE
N O P Q R S T U V W X Y Z DELETE
SPACE abcdefghi jklm
nopq r s t uvwx y z
0123456789
!”#$%&’ +–/=?
_` |~( ) [ ] { } ,@\ ˆ
.;:
CANCEL
1 select
2 set
32
Picture Profi les
Load profi les and apply the picture adjustment values to the display as follows.
Notes:
• Loaded profi les are stored in memory according to the selected input interface (SLOT1, 2, 3 or PC IN). (see page 15)
• When the settings are locked in “EXTENDED LIFE SETTINGS”, profi les cannot be loaded.
1In the PICTURE menu, select “MEMORY LOAD”.
MEMORY SAVEMEMORY LOAD
MEMORY EDIT1 select
2 access
Loading profi les
2
Select the profi le to load.
MEMORY LOAD
1. [ ]
2. [ ]
3. [ ]MEMORY2
MEMORY3 MEMORY1
1 select
2 set
Profi les are labeled with these icons to indicate their
locked status. (see page 33)
Delete or rename profi les as follows.
1In the PICTURE menu, select “MEMORY EDIT”.
MEMORY SAVEMEMORY LOAD
MEMORY EDIT1 select
2 access
2Select “MEMORY DELETE”.
MEMORY EDIT
MEMORY NAME CHANGEMEMORY DELETE
1 select
2 set
3Select the profi le to delete.
To delete all profi les, select “ALL DELETE”.
MEMORY DELETE
ALL DELETE
1. [ ]
2. [ ]
3. [ ]MEMORY2
MEMORY3 MEMORY1
1 select
2 set
4Select “OK”.
MEMORY DELETE
CANCEL DELETE THE MEMORY1 DATA.OK
1 select
2 set
1In the PICTURE menu, select “MEMORY EDIT”.
MEMORY SAVEMEMORY LOAD
MEMORY EDIT1 select
2 access
2Select “MEMORY NAME CHANGE”.
MEMORY EDIT
MEMORY NAME CHANGEMEMORY DELETE
1 select
2 set
3Select the profi le to rename.
MEMORY NAME CHANGE
1. [ ]
2. [ ]
3. [ ]MEMORY2
MEMORY3 MEMORY1
1 select
2 set
4Enter a name for the profi le.
Entering profi le names
page 31
MEMORY NAME INPUT█EMORY1 M
OK ABCDE FGH I J K LMALL DELETE
N O P Q R S T U V W X Y Z DELETE
SPACE abcde f gh i j k lm
nopq r s t uvwx y z
0123456789
!”#$%&’ +–/=?
_ ` | ~ ( ) [ ] { } ,@\ ˆ
.;:
CANCEL1 select
2 set
5When you fi nished entering the profi le name, select “OK”.
To cancel renaming the profi le, select “CANCEL”.
OKCANCEL1 select
2 set
Editing profi les
Note:
Locked profi les cannot be deleted.
Note:
Locked profi les cannot be renamed.
33 Picture Profi les You can lock saved profi les to restrict operations when the profi les are loaded. You can also set passwords. Notes: • When the lock is set in “EXTENDED LIFE SETTINGS”, profi le cannot be locked. • If profi le is locked, the menu operations of “EXTENDED LIFE SETTINGS” are restricted. (see page 40) 1Display the menu screen. (see page 55) 2Select “Memory lock”. Options On Weekly Command Timer Onscreen displayMemory lock OffInitial INPUTInitial VOL level 1/3 Off Off 0 0Maximum VOL levelOffINPUT lockOffButton lockOffRemocon User level 1 select 2 access 3Enter a 4-digit password. The default password is “0123”. 4Select “Ok”. OkCancel Input password1 select 2 set 5Select the profi le and specify the desired lock setting. Memory lock Off Change password MEMORY3OffMEMORY4 Lock1MEMORY1OffMEMORY2 isf ModeOff 1 select 2 adjust 6Exit the menu. Lock1 Picture adjustment values are shown. Lock2 Picture adjustment values are hidden. 25 0 0 0 5 PICTURE NORMAL NORMALIZE STANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENTADVANCED SETTINGS COLOR TEMPNORMAL OFF Can be specifi ed. Cannot be specifi ed. PICTURE NORMAL NORMALIZE STANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENTADVANCED SETTINGS COLOR TEMP Can be specifi ed. Cannot be specifi ed. Locking profi les Loading locked profi les… In the PICTURE menu, profi les are labeled with these icons to indicate their locked status. 25 PICTURE NORMAL NORMALIZE STANDARD PICTURE MENU PICTURE Picture adjustment values in the PICTURE menu cannot be changed, except for the “PICTURE MENU”. Once you edit the “PICTURE MENU” setting, you can edit “PICTURE”, “BRIGHTNESS”, and other picture adjustment values. Once a profi le is locked, the following operations are restricted when the profi le is loaded. Setting Editing the Profi le (MEMORY EDIT)Editing Picture Adjustment Values via the Menu (PICTURE menu, ADVANCED SETTINGS)Saving Picture Adjustment Values (MEMORY SAVE) Off (unlocked)Allowed Allowed Allowed Lock1ProhibitedProhibited (picture adjustment values are shown)Allowed Lock2ProhibitedProhibited (picture adjustment values are hidden)Prohibited
34 Picture Profi les Note: Make a note of the new password to remember it. 1Follow steps 1–4 in the previous procedure, . 2Select “Change password”. Memory lock Off Change password MEMORY3OffMEMORY4 Lock1MEMORY1OffMEMORY2 isf ModeOff 1 select 2 access 3Enter a new 4-digit password. 4Select “Ok”. OkCancel Input new password1 select 2 set 5Exit the menu. Switches to “PICTURE MENU” mode display. 1Follow steps 1–4 in the previous procedure, . 2Select “isf Mode”. Memory lock Off Change password MEMORY3OffMEMORY4 Lock1MEMORY1OffMEMORY2 isf ModeOff 1 select 2 adjust 3Specify “On” or “Off”. 4Exit the menu. Specifying “On” for isf Mode changes the “PICTURE MENU” mode display as follows. “PICTURE MENU” mode display 25 0 PICTURE NORMAL NORMALIZE STANDARD BRIGHTNESS PICTURE MENU PICTURE isf Mode: Off isf Mode: On STANDARD STANDARD DYNAMIC isf Mode DAY CINEMA isf Mode NIGHT MONITOR MONITOR
0 0 0 1/2 SOUND NORMALNORMALIZE OFF TREBLE BALANCEBASS 0 MID SURROUND MAIN AUDIO OUT (PIP) 35 SOUND Adjustment 1Press to display the SOUND menu. Press to select the menu to adjust. Select the desired level by listening to the sound. Press to exit from adjust mode. 2Select to adjust each item. While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. Helpful Hint ( / NORMALIZE Normalization) 3 SDI SOUND OUTPUT This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY- FB11DHD) is installed to the unit. 2/2 SOUND OUT LEFT CHANNEL RIGHT CHANNELCHANNEL 1 CHANNEL 1 OFF LEVEL METEROFF SDI SOUND OUTPUT Notes: • This menu is available only when selecting a slot that HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-FB11DHD)is installed. • This menu is unavailable when 2-picture display mode is active. Item Details LEFT CHANNELCHANNEL 1 to CHANNEL 16 Selects left audio channel. RIGHT CHANNELCHANNEL 1 to CHANNEL 16 Selects right audio channel. SOUND OUTON OFF ON: Enables audio output. OFF: Disables audio output. LEVEL METEROFF 1-8CH 9-16CH Sets audio channels to show in the audio level meter. 8 channels are displayed in the audio level meter; 4 channels each on both right and left sides of the display. OFF: Hides the audio level meter. 1-8CH: Displays the audio level meter (1-8ch) 9-16CH: Displays the audio level meter (9-16ch) Item Details BASSAdjusts low pitch sounds. MIDAdjusts normal sounds. TREBLEAdjusts pitch sound. BALANCEAdjusts left and right volumes. SURROUNDSelect ON or OFF. AUDIO OUT (PIP)MAIN: Selects main picture sound. SUB: Selects PIP frame sound. A B INPUT1 PC A B INPUT1 PC Musical note ♪ is displayed on right side of the audio output screen label.
99:99MON PRESENT TIME SETUP PRESENT TIME OF DAY MON 99:99 SET PRESENT TIME OF DAY DAY 0:00 0:00 SET UP TIMER POWER OFF FUNCTION POWER ON FUNCTION OFF OFF PRESENT TIME OF DAY 99:99 POWER OFF TIME POWER ON TIME 2/2 SET UP MULTI DISPLAY SETUPMULTI PIP SETUPPORTRAIT SETUP SET UP TIMER PRESENT TIME SETUP DISPLAY ORIENTATIONLANDSCAPE 36 PRESENT TIME SETUP / SET UP TIMER PRESENT TIME SETUP The timer can switch the Plasma Display ON or OFF. Before attempting Timer Set, confi rm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME / POWER OFF TIME. Press to display the SET UP menu. Press to select SET UP TIMER or PRESENT TIME SETUP. Press to display the SET UP TIMER screen or PRESENT TIME SETUP screen. 2 Press to select DAY or PRESENT TIME OF DAY. Press to set up DAY or PRESENT TIME OF DAY. button: Forward button: Back Notes: • Pressing “ ” or “ ” button once changes PRESENT TIME OF DAY 1 minute. • Pressing “ ” or “ ” button continuously changes PRESENT TIME OF DAY by 15 minutes. Press to select SET. Press to store PRESENT TIME SETUP. Notes: • SET cannot be selected unless PRESENT TIME OF DAY is set. • Unless setting the present time other than “99:99”, DAY setting is invalid. • The settings of “DAY” and “PRESENT TIME OF DAY” are reset when leaving the display turned off for about 7 days for the following reasons: Pressing switch of the unit to turn off the display. Disconnecting the AC cord. Interruption of power supply. 1 1 2 Press to select POWER ON TIME / POWER OFF TIME. Press to set up POWER ON TIME / POWER OFF TIME. button: Forward button: Back Notes: • Pressing “ ” or “ ” button once changes POWER ON TIME / POWER OFF TIME 1 minute. • Pressing “ ” or “ ” button continuously changes POWER ON TIME / POWER OFF TIME by 15 minutes. Press to select POWER ON FUNCTION / POWER OFF FUNCTION. Press to select ON. Note: Timer function will not work unless “PRESENT TIME OF DAY” is set. 2 1 SET UP TIMER
1/2 SIGNAL EXTENDED LIFE SETTINGSSCREENSAVER PC OFF STANDBY SAVE OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGEENGLISH ( US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SAVE SET UP SCREENSAVER START FUNCTION SCROLLING BAR ONLY PRESENT TIME OF DAY 99:99 MODEOFF 37 Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSAVER should be used. FUNCTION selection 2 3 1 4 Press to display the SET UP menu. Press to select the SCREENSAVER. Press to select the SCREENSAVER screen. Press to select the FUNCTION. Press to select the desired function. SCROLLING BAR ONLY OVERLAY SCROLLING BAR NEGATIVE IMAGE WHITE SCREEN MODE selection START setting5 When the MODE is set to ON, press to select START. Press to start SCREENSAVER. The menu screen will disappear and the SCREENSAVER will be activated. To stop the SCREENSAVER under ON, press the R button or any buttons on the main unit. Note: When the display is turned off, the SCREENSAVER will be deactivated. Press to select the MODE. Press to select each mode items. SCREENSAVER (For preventing image retention) Off INTERVAL : Operates when SHOW DURATION and SAVER DURATION are set up and those times arrive. TIME OF DAY : Operates when START TIME and FINISH TIME are set up and those times arrive. STANDBY AFTER SCR SAVER : Operates while SCREENSAVER DURATION, and display enters standby mode. ON : Operates when START is selected and the ACTION ( ) button is pressed. NEGATIVE IMAGE : A negative image will be displayed on the screen. SCROLLING BAR ONLY : A white bar will scroll from left to right. The image wont be displayed. OVERLAY SCROLLING BAR: The brightness of the image will be decreased and a white bar will scroll on it. WHITE SCREEN : The whole screen will be white. Note: OVERLAY SCROLLING BAR is not effective during two screen display.
SCREENSAVER START FUNCTION MODE FINISH TIME START TIME SCROLLING BAR ONLY TIME OF DAY 6:15 12:30 PRESENT TIME OF DAY 15:00 SCREENSAVER START FUNCTION MODE SAVER DURATION SHOW DURATION SCROLLING BAR ONLY INTERVAL 12:00 3:00 PRESENT TIME OF DAY 15:00 SCREENSAVER START FUNCTION MODE SCREENSAVER DURATION SCROLLING BAR ONLYSTANDBY AFTER SCR SAVER6:15 PRESENT TIME OF DAY 15:00 38 SCREENSAVER (For preventing image retention) Setup of SCREENSAVER Time After selecting TIME OF DAY, INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.) Press to select START TIME / FINISH TIME (when TIME OF DAY is selected). Press to select SHOW DURATION / SAVER DURATION (when INTERVAL is selected). Press to select SCREENSAVER DURATION (when STANDBY AFTER SCR SAVER is selected). Press to setup. button: Forward button: Back Note: Timer function will not work unless “PRESENT TIME OF DAY” is set. Notes: • Pressing “ ” or “” button once changes the Time 1 minute. [However, switching occurs every 15 minutes when Periodic Time is selected.] • Pressing “” or “” button continuously changes the Time by 15 minutes. • “SCREENSAVER DURATION” of the “STANDBY AFTER SCR SAVER” can be set from 0:00 to 23:59. When this is set to “0:00”, “STANDBY AFTER SCR SAVER” will not be activated.
1/2 SIGNAL EXTENDED LIFE SETTINGSSCREENSAVER PC OFF STANDBY SAVE OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGEENGLISH ( US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SAVE SET UP EXPRESS SETTINGS CUSTOM SETTINGS RESET EXTENDED LIFE SETTINGS PICTURE MENU PICTURE EXTENDED LIFE SETTINGS DYNAMIC SIDE BAR ADJUST NANODRIFT SAVER LOCK SETTINGSPEAK LIMIT BRIGHT HIGH MID UNLOCK APPLY TO CURRENT INPUTAPPLY TO ALL INPUTS OFF 30 RECOMMENDED SETTINGS 39 EXTENDED LIFE SETTINGS SIDE BAR ADJUST Do not display a picture in 4:3 mode for an extended period, as this can cause an image retention to remain on the side bars on either side of the display fi eld. To reduce the risk of such an image retention, illuminate the side bars. This function may be applicable to the non-picture area. OFF: Darken both ends. DARK: Make it dark gray. MID: Make it gray. BRIGHT: Make it light gray. Notes: • To reduce the occurrence of image retention, set the SIDE BAR ADJUST to BRIGHT. • The side bar may fl ash (alternate black/white) depending on the picture being shown on the screen. Using Cinema mode will reduce such fl ashing.side bars 4:3 mode image retention P OUT P P AND PNon picture area Reduces screen image retention The following settings are setup to reduce image retention: Image Retention Reduction Menu “EXTENDED LIFE SETTINGS” enables you to set the following 5 menus (Image Retention Reduction Menu) as recommended values or set them individually. PICTURE MENU PICTURE “PICTURE MENU” and “PICTURE” are same as “PICTURE” menu items (see page 28). The settings of this menu will be refl ected to the “PICTURE” menu. Set to the recommended value Set individually Reset to the factory settings Image Retention Reduction Menu
40
Reduces screen image retention
EXPRESS SETTINGS
Set the “Image Retention Reduction” menu to the recommended settings.
All menus will be locked.
PICTURE MENU: STANDARD
PICTURE: 10
SIDE BAR ADJUST: BRIGHT
NANODRIFT SAVER: HIGH MID
PEAK LIMIT: ON
1Select “EXPRESS SETTINGS”.
EXPRESS SETTINGS
CUSTOM SETTINGS
RESET
EXTENDED LIFE SETTINGS1 select
2 access
2Select the input to apply the settings.
APPLY TO CURRENT INPUT
APPLY TO ALL INPUTS
EXTENDED LIFE SETTINGS1 select
2 set
PEAK LIMIT
ON: Suppresses image contrast (peak brightness).
Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 60) NANODRIFT SAVER
Moves the display position of the screen slightly to reduce image retention on the display panel.
OFF: NANODRIFT SAVER does not operate.
MIN–MAX: NANODRIFT SAVER operates. The display position of the screen moves at set time intervals. You can set
the screen movement range. Some of the screen may appear to be missing as a result of this operation.
If you change the value, a mask is displayed in the range where the picture is missing as a result of position
movement.
If this is set to other than “OFF”, “NANODRIFT” is displayed below the aspect
mode display.
Note:
This function does not work in the following cases.
When “MULTI DISPLAY SETUP” is set to “ON”
When “PORTRAIT SETUP” is set to “ON”
When in digital zoom mode
PC
FULLNANODRIFT
3Select “YES”.
APPLY TO CURRENT INPUT
NO YES
EXTENDED LIFE SETTINGS1 select
2 set
EXTENDED LIFE SETTINGS when profi le is locked
If profi le is locked with “Memory lock” of the Options menu, the operations of this settings menu are restricted
as shown below. “Locking profi les”
page 33
EXPRESS SETTINGS: Cannot be set.
CUSTOM SETTINGS: “PICTURE MENU”, “PICTURE” and “LOCK SETTINGS” cannot be set.
RESET: “PICTURE MENU” and “PICTURE” are not reset.