Panasonic Th 103vx200 Operating Instructions

51
SET UP menu
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (
US)
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUPINPUT LABEL
COMPONENT/RGB-IN SELECT
RGB 3D SETTINGS
EXPRESS SETTINGSCUSTOM SETTINGSRESET
EXTENDED LIFE SETTINGS
30
OFF
UNLOCKBRIGHT DYNAMIC
MID PICTURE PICTURE MENU EXTENDED LIFE SETTINGS
RECOMMENDED SETTINGS
SIDE BAR ADJUST
NANODRIFT SAVER
PEAK LIMIT
LOCK SETTINGS
APPLY TO CURRENT...

52
EXPRESS SETTINGS
Set the “Image Retention Reduction” menu to the recommended settings.
All menus will be locked.
   PICTURE MENU: STANDARD
      PICTURE: Recommended setting for each model
   SIDE BAR ADJUST: BRIGHT
   NANODRIFT SAVER: MID
   PEAK LIMIT: ON
1Select “EXPRESS SETTINGS”.
EXPRESS SETTINGSCUSTOM SETTINGSRESET
EXTENDED LIFE SETTINGS1 select
2 access
2Select the input to apply the settings.
APPLY TO CURRENT INPUTAPPLY TO ALL INPUTS EXTENDED LIFE SETTINGS
1 select
2 set
3Select “YES”.
YES...

53
SET UP menu
CUSTOM SETTINGS
Set the individual “Image Retention Reduction” menu.
1Select “CUSTOM SETTINGS”.
CUSTOM SETTINGSRESET
EXTENDED LIFE SETTINGSEXPRESS SETTINGS2  access
1  select
2To set each menu to the recommended setting:
Select “RECOMMENDED SETTINGS”.
30
OFF
UNLOCKBRIGHT DYNAMIC
MID PICTURE PICTURE MENU EXTENDED LIFE SETTINGS
RECOMMENDED SETTINGS
SIDE BAR ADJUST
NANODRIFT SAVER
PEAK LIMIT
LOCK SETTINGS
APPLY TO CURRENT INPUTAPPLY TO ALL INPUTS
2  set
1  select
Each menu will be set as same...

54
SET UP menu
This function can change the label of the Input signal to be displayed. (see page 19)
Customizing the Input labels
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (
US)
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUPINPUT LABEL
COMPONENT/RGB-IN SELECT
RGB 3D SETTINGS
HDMI1 HDMI1 INPUT LABELHDMI2 HDMI2HDMI3 HDMI3HDMI4 HDMI4SLOT INPUT SLOT INPUTCOMPONENT COMPONENTPC PC
 
Note:
The setting...

SIGNAL
EXTENDED LIFE SETTINGS
SCREENSAVER
INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
NETWORK SETUP
192.168.  0.  8
1024 255.255.255.
  0
192.168.
  0.  1 IP ADDRESS DHCP NETWORK SETUP
SAVE
SUBNET MASK
GATEWAY
PORT
AUTO LAN SPEED
0 NETWORK ID
RS-232C CONTROL I/F SELECT
--:--:--:--:--:-- MAC ADDRESSOFF
Network Setup
Make the various settings to use the network function.
  DHCP, IP ADDRESS, SUBNET MASK, and GATEWAY settings
1 Set DHCP.
     
When “OFF” is selected, IP ADDRESS and other settings can...

Item Adjustments
Onscreen displayOn:  Displays all the following on screen.
•  Power on display
•  Input signal switch display
•  No signal display
•  Remainig time of off-timer after 
 was pressed.
Off:  Hides all the items above from view.
All AspectSets All Aspect mode (advanced aspect setting) or default aspect mode.
With each press of 
 button, the aspect changes in the selected mode.
Off:  Default aspect mode
On: All Aspect mode
Aspect mode of each setting is as follows:
(Example: HD signal)
Off...

OPTIONS Adjustments
Item Adjustments
3D EmitterSet the infrared transmitter for the 3D Eyewear.
INT: Use the infrared transmitter of the unit.
EXT: Use the external 3D IR TRANSMITTER (available separately.) 
Function button assign 1
Function button assign 2Set the function to operate when the FUNCTION button 1 to 2 on the remote control is pressed.
3D settings: The “3D SETTINGS” menu is displayed.
Scrolling bar: 
The screen saver activates, and after 15 minutes, the display power shuts down...

Using Network Function
This unit has a network function to control the network connected display with your computer.
Note:
To use the network function, set each “NETWORK SETUP” setting and make sure to set the “CONTROL I/F SELECT” 
to “LAN”. (see page 55)
When “LAN” is set, power is supplied to LAN circuit, and power indicator is lit orange under the condition of power off 
with remote control (stand-by state).
Example of Network Connection
Command Control
Network function of the unit can control the...

Using Network Function
PJLink™ Protocol
The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your 
computer using PJLink™ protocol. 
• Display setup
•  Display status query
Supported commands
Commands to control the unit with PJLink™ protocol are shown in the table below.
PJLink™ security authentication
Set “Panasonic” for the PJLink™ password.
•  PJLink™ is a pending trademark in Japan, the United States, and other countries or areas. 
Command...

Unit Setup
Set each “NETWORK SETUP” setting and make sure to set the “CONTROL I/F SELECT” to “LAN”. (see page 55)
Computer Setup
Disable the proxy server settings and enable JavaScript. 
You can use a Web browser to control the unit and set up a network and password.
Access to the TOP screen of the Web browser control using a Web browser. To use the Web browser control, the unit and computer setups are required.
(Windows) (Macintosh)
Disable proxy server settings
1  Display [Internet Properties] window....