Panasonic Th 42ph11rk Operating Instructions

2/2 Setup 
MULTI DISPLAY Setup
Set up TIMER
PRESENT TIME Setup
Display orientation
Landscape
× 2  MULTI DISPLAY Setup 
Horizontal Scale Off 
A1
Off
AI-synchronization Vertical Scale 
LocationOff
Seam hides video× 2 
MULTI DISPLAY Setup 
31
Press to display the Setup menu.
Press to select the MULTI DISPLAY Setup.
Press to display the “MULTI DISPLAY Setup” menu.
Press to select the MULTI DISPLAY Setup.
Press to select “On” or “Off”.
How to Setup MULTI DISPLAY
1
2
3
Setup for MULTI DISPLAY
By lining up...

32Setup for MULTI DISPLAY
Item Details
AI-SynchronizationSelect “Off” or “On”.
The brightness depends on each 
display’s setting.Equalize the brightness of all the 
displays.
Off On
Note:
If you set AI-synchronization to On, the following menus will be unavailable and these settings 
will be fi xed to the initial values.
Picture menu: Colour, Hue, Input level (Advanced settings)
Press twice to exit from Setup.
4
You can set the remote control ID when you want to use this remote control on one of several...

1/2
SignalScreensaver
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD LanguageEnglish (
UK) Component/RGB-in select
RGB
Input label
Power save
Setup
1/2
SignalScreensaver
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD LanguageEnglish (
UK) YUV/RGB-in select
RGB
Input label
Power save
Setup
33
Setup for Input Signals
Component / RGB-in select
Select to match the signals from the source connected to the Component / RGB input terminals.
Y,  P
B, PR signals...

3D Y/C Filter (NTSC)On
1/2
SignalScreensaver
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD LanguageEnglish (
UK) Component/RGB-in select
RGB
Input label
Power save
Setup
3D Y/C Filter (NTSC)
Colour system
Signal
On
Auto
Cinema reality
Panasonic Auto (4:3)Off
4:3
[ 
AV ]
Noise reduction
OffRefresh Rate
100 Hz
Cinema reality
Signal
Off
H-Freq.
V-Freq.kHz
Hz63.98
60.02Noise reduction
Off
[ 
Digital ] 
Signal Format1280×1024/60
Refresh Rate
100 HzCinema reality
Signal
Off
 [ 
Component...

3D Y/C Filter (NTSC) 
Colour system 
Signal 
On 
Auto 
Cinema reality 
Panasonic Auto (4 : 3) Off 
4 : 3 
[ 
AV ] 
Noise reductionOffRefresh Rate100 Hz
Cinema reality Off 
XGA Mode1024 × 768
35
Setup for Input Signals
Colour system / Panasonic Auto
Select Signal from the “Setup” menu during AV(S Video) input signal. (“Signal [AV]” 
menu is displayed.)
Press to select the “Colour system” or “Panasonic Auto”.
Press to select each functions.
If the picture image becomes unstable:
With the system set on...

Advanced NR[ 
AV ]
Mosquito NRP-NR
Block NROff Off
Off
Advanced NR[ 
Digital ]
Mosquito NRP-NR
Block NROff Off
Off
Advanced NR[ 
Component ]
Mosquito NRP-NR
Block NROff Off
Off
Advanced NR[ 
RGB ] 
Mosquito NRP-NR
Block NROff Off
Off
()Noise reduction
Off
Noise reduction
Advanced
Refresh Rate
100 Hz
36
Press to select “Noise reduction”.
Press to select “Off”, “Min” , “Mid” , “Max” , “Advanced”. Sets the following three NR (Noise Reduction) functions together.
P-NR, Mosquito NR, Block NR
Noise reduction...

Sync
Auto
Sync
on G
Sync
VBS
H-Freq.
V-Freq.kHz
Hz63.98
60.02
Signal Format
1280×1024/60
Sync
Signal[ 
RGB ] 
Cinema realityXGA Mode
Auto
Off
1024 × 768
37
Select Signal from the “Setup” menu during RGB input signal.
Setting RGB sync signal:
Confi rm that the input is set to RGB input (this setting is valid only for RGB input 
signal).
Auto:  The H and V sync or synchronized signal are automatically selected. If 
both input, it is selected the H and V sync.
on G:  Uses a synchronized signal on the Video G...

Options 
Weekly Command Timer 
1/3 
 
Initial INPUT  Onscreen display On 
O f  f 
Off Off
0 0Maximum VOL level Initial VOL levelOffINPUT lockOffButton lockOffRemocon User levelOffAdvanced PIP
Options
EnableOff-timer functionNormalInitial Power Mode0ID selectOffRemote IDOffSerial IDOffDisplay sizeOffStudio W/BOffStudio Gain
2/3
3/3Options
Off
Off
Off Clock Display
Rotate
Off All Aspect
Slot1 Serial Slot Select Slot power
Off
Power On Screen Delay
38
Options Adjustments
1
2
3
5Press to display the Setup...

39
Options Adjustments
Item Adjustments
INPUT lockOff   PC   INPUT1   INPUT2   INPUT3
Locks the input switch operation.
Notes:
• Only the adjusted signal is displayed (see page 14).
• Signal can be displayed when the Terminal board is installed.
• Input switch can be used when this is set to “Off”.
• In two screen display mode, if anything other than “Off” is set, the value will be fi xed as the value input 
in the single screen display mode.
•  When a dual input terminal board is attached, A or B is...

40
Options Adjustments
Item Adjustments
Studio W/BOff:  Nullify all the settings adjusted.
On:  Sets the colour temperature for TV studio.
Note: Valid only when the low is set as colour temperature on screen adjustment.
Studio GainSharpens the contrast for a better view when a part of the image is too light to see.
Off: Disables “Studio Gain”.
On: Enables “Studio Gain”.
Note:  This setting is valid only when the input signals are as follows:
    Component Video, RGB (analog), SDI, HDMI
Slot PowerOff...