Panasonic Tv Dvd Combination Pv 20df63 Operating Instructions

							2121
TV Operation
1
Caption On Mute Feature
Closed Caption narration, if available, is displayed when 
MUTE button is pressed. 
Press ACTION to display MAIN MENU.
  When a disc supporting closed caption is 
used, the subtitle and the closed caption may 
overlap. In this case, turn the subtitle or 
caption on mute mode off. (See page 36.)
2
1) Press    
  
 to 
select “TV.”
2) Press SET to display 
SET UP TV screen.
6
Press ACTION three times to return to the normal 
screen.
7
Press MUTE to mute the sound and display 
closed captioning.
  To cancel, press MUTE again.
3
1) Press   
 to select 
“CAPTION.”
2) Press SET to display 
CAPTION screen.
M A I N  MENU
DVDLOCK
CH
CLOCKTV
LANGUAGE
END         : ACT I ON SELECT  :                            SET : SET 
531
4
1) Press   
to select 
CAPTION MODE.
2) Press SET repeatedly 
to select “OFF.”
NOCAP C1
CAP C2
5
1) Press   
 to select 
CC ON MUTE.
2) Press SET repeatedly 
to select desired mode.
  Each press of SET will change 
the display as shown left. 
  The caption may be broadcast 
over CAP C1 or C2.
CAPT I ONCAPT I ON  MODE      :    OFF
CC  ON  MUTE          :   CAP   C1  
SET          : SET      SELECT  :                                  
END          : ACT I ON 
*Important: If a remote control button does not work when pressed, press the FM/TV button 
on the remote and try the button again.
SELECT :          
END       : ACT I ON      
              SET  UP  TV   
SET : SET
CAPT I ON    I NPUT  SELECT       : TUNER SET  UP  V I DEO / AUD I ODVD  VOL  ADJUST   : + 2FM  ANTENNA            :  I NT
REMOTE WARNING :ON
LIGHT
TITLE MENUDISPLAY ADD/DLT
PAUSE
DSS
CABLE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
+VO
LC
H
CH V
OL
10
SUB TITLEANGLE
ZOOM AUDIO
OPEN/CLOSE
CLEAR
ENTER
MUTETIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
SURROUND
MUTE
ACTION
Note
SELECT
SET 
						

							22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
TV Timer Features
1
ON-TIMER with Alarm
This unit can be set to automatically power on in one of 
3 modes (TV, FM radio, or DVD/Video CD/CD.) You 
can also combine the On-Timer with a one minute 
alarm that gradually increases in volume.
  If no button on the remote or unit (including a 
button used to turn off the alarm) is pressed 
within 60 minutes after unit turns itself on, it will 
turn itself back off.
Press TIMER* to display SET TIMER screen.
To Cancel ON-TIMER,
Repeat steps 1 and 2. Then, press ADD/DLT to clear 
the time in step 3. Now, press TIMER to end.
“ON TIMER END” brie y appears on-screen.
2
1) Press   to select 
“ON TIMER.”
2) Press SET to 
display ON TIMER 
screen.
3
 ON-TIMER mode 
selection order
1) Press   to select 
desired settings.
2) Press SET to set 
the ON-TIMER 
time or ON-TIMER 
mode.
  Make sure a disc is 
inserted if DVD 
(DVD/Video CD/CD) 
mode is selected.
 See “FM Radio” on pages 
24 and 25 for instructions 
on how to preset FM 
stations.
4
Press   to select 
ALARM “ON” or 
“OFF.”
When “ON” is selected,
an alarm will gradually increase in volume for one 
minute or until canceled by pressing any button 
(including VOL + -).
To Make Corrections,
use 
    and  
  
 to move back and correct.
5
Press TIMER to set ON TIMER. “ON TIMER SET” is displayed. 
  ON-TIMER Indicator lights up on the unit.
Sleep Timer 
This unit can be set for auto power off.
Press TIMER to display SET TIMER 
screen.
1
To cancel, 
press SET repeatedly until 00 appears.
2
1) Press  to 
select SLEEP 
TIMER.
2) Press SET 
repeatedly to 
select the 
desired time.
3
Press TIMER to return to the  
normal screen.
 Pressing DISPLAY with sleep timer set 
displays remaining time.
  SLEEP TIMER Indicator lights up on the 
unit.
SLEEP TIMER    30     60     90     00
SLEEP TIMER Indicator
ON TIMER Indicator
SET          :  SET SELECT  :            
END          :  T I MER  SET   TIMER
ON   T I MER
S LEEP     T I MER : 00
SET          :  SET SELECT  :            END          :  T I MER   SET   TIMER
ON   T I MER
S LEEP     T I MER : 00
ON  T I MER
SELE CT  HOUR
SET          : SET       SELECT  :                                  
END          : T I MER 
ALARM : ON
ON  T I MER
SELE CT  ALARM
SET       : SET                BACK :       SELECT  :                              
END          : T I MER  
ALARM : ON
CANCEL  : ADD / DLT     
FM1CH01
CH125
FM8 FM9CH02CH03
DVD
Note
  The clock is set to the correct time.
 Check List 
						

							2323
TV Operation
TV Status & Clock Display
Press DISPLAY to display or remove the overlay.
Blue Screen Display
When you change channels, the channel number will be 
displayed.
Channel Display
Whenever the selected channel has no broadcast signal with the 
Weak Signal Display Feature set to “OFF” (see page 28), the 
screen will turn solid blue. *Important: If a remote control button does not work when pressed, press the 
FM/TV button on the remote and 
try the button again.
LIGHT
TITLE MENUDISPLAY ADD/DLT
PAUSE
DSS
CABLE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
+VO
LC
H
CH V
OL
10
SUB TITLEANGLE
ZOOM AUDIO
OPEN/CLOSE
CLEAR
ENTER
MUTETIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
SURROUND
DISPLAY ADD/DLT TIMER
CH08
STEREOSAPMONO
Current Time
Receivable 
Broadcast Types 
(See page 19.)
Channel
CH08
On-Screen Display (OSD)
SELECT
SET 
						

							24For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1) Press CH  to 
select the desired 
radio station. 
(Each 
press changes 
frequency by 200 
kHz.)
2) Press ADD/DLT to 
set the radio 
station.
Hold down CH 
 
or  for a few 
seconds, then 
release to quickly 
scan for FM 
stations in your 
area.
 To cancel, press CH  
or  while in search 
mode.
FM Radio
FM  1     87.  5MHz
1 2 : 0 0PM
FM  1     8 7. 7MHz
MEMORY : PRESS  ADD / DLT  KEY
1 2 : 0 0PM
FM  1     8 7. 7MHz
MEMOR I ZED
1 2 : 0 0PM
2
Press a NUMBER 
key (1~9) to select the 
FM preset number.
1
To Make Corrections, 
select station with a NUMBER key, then do step 3 
again. 
To exit FM mode, 
press FM/TV or DVD on the remote.
3
FM Radio Setup
Press FM/TV* on the remote to display FM 
radio mode.
FM Radio is ...This unit has an FM radio with built-in antenna, 9 station preset, and a band range of 87.5 ~ 108.1 
MHz. You can set the On-Timer (page 22) to wake up to your favorite radio station.
CH    
						

							2525
TV Operation
M A I N  MENU
DVDLOCK
CH
CLOCKTV
LANGUAGE
END         : ACT I ON SELECT  :                            SET : SET 
531
FM Antenna Setup
1
2
Make sure FM tuning is done correctly (see FM 
Radio Setup).
Press ACTION to display MAIN MENU.
1) Press   to 
select “TV.”
2) Press SET to 
display SET UP TV 
screen.
3
4
■For cable TV users➞ “INT”
■For antenna users
➞ “EXT”
2 1
To exit FM mode, 
press FM/TV or DVD on the remote.
Press a NUMBER key 
(1~9) to select a preset 
FM number 
(see FM Radio Setup 
on page 24).
Using FM Radio
Press ACTION twice to end setup.
Press FM/TV on the remote to display 
FM radio mode.
  You may get better reception by repositioning 
the unit.
  You cannot select FM Radio mode while a blue 
back screen (ACTION, MENU) is displayed.
  Once stations are set, the selected station and 
current time are displayed when FM Radio mode 
is entered. To remove time, press DISPLAY. If 
DISPLAY is pressed again, the unit status 
screen appears.
Audio Mode for  FM Radio
Press AUDIO 
repeatedly to 
select “STEREO” 
or “MONO” in FM 
Radio mode.
1) Press  to 
select FM 
ANTENNA.
2) Press SET to 
select “INT 
(INTERNAL)” or 
“EXT 
(EXTERNAL)” to 
determine which 
one sounds best.
FM  1     87.  5MHz
1 2 : 0 0PM
STEREOMONOFM  1     8 7. 7MHz
1 2 : 0 0PM
SELECT :          
END       : ACT I ON      
              SET  UP  TV   
SET : SET
CAPT I ON  
 I NPUT  SELECT       : TUNER SET  UP  V I DEO / AUD I ODVD  VOL  ADJUST   : + 2FM  ANTENNA            :  I NT
REMOTE WARNING :ON
LIGHT
TITLE MENUDISPLAY ADD/DLT
PAUSE
DSS
CABLE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
+VO
LC
H
CH V
OL
10
SUB TITLEANGLE
ZOOM AUDIO
OPEN/CLOSE
CLEAR
ENTER
MUTETIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
SURROUND
FM/TVDVD
CH
  
NUMBER 
keys
ADD/DLT
DISPLAY
AUDIO
ACTION
Notes
SELECT
SET 
						

							26For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Universal Remote Control is...The Remote Control may be set up to control some basic 
DSS or Cable box functions.
The Universal Remote Control Setup
1
Press FM/TV, DVD or DSS CABLE on the remote 
control to select the desired mode. (See below for buttons 
available in each mode.)  Once the remote control has been properly set up, you can 
select FM/TV, DVD, DSS or CABLE mode depending on 
which functions you wish to control.
Find your DSS box or Cable box Brand Code 
Number from one of the charts on the next 
page.
3
Con rm code entry. Press POWER* to turn 
selected unit ON or OFF.
  See below for controllable functions in each mode.
  Please repeat the Universal Remote Control Setup after 
replacing remote control batteries.
  The remote control will not operate all DSS receivers or Cable 
Boxes made by the manufacturers listed. If you get no results, 
your particular brand cannot be controlled.
2
Set up remote. Hold down DSS CABLE and 
press NUMBER keys to enter code.
  If code number is 100 or greater, e.g., press 1 - 0 - 2 for 
102.
Using the Universal Remote Control 
(Available Buttons / Functions)
Set to FM/TV, DVD:
Cable Box Universal Remote Control Feature
Set to DSS CABLE:
  CABLE/DSS function, e.g. POWER, ENTER, NUMBER keys 
(except 100 key), CH UP/DOWN.
All TV, FM, and DVD functions.
LIGHT
TITLE MENUDISPLAY ADD/DLT
PAUSE
DSS
CABLE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
+VO
LC
H
CH V
OL
10
SUB TITLEANGLE
ZOOM AUDIO
OPEN/CLOSE
CLEAR
ENTER
MUTETIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
SURROUND
DVD
POWER
FM / TV DSS
CABLE
NUMBER
keys
ENTER
Notes 
						

							2727
Advanced Operation
  In DSS or CABLE mode, it may be necessary to press ENTER after pressing NUMBER keys for channel selection.
  In DSS or CABLE mode, POWER, CH Up/Down, NUMBER Keys, ACTION, TIMER, DISPLAY/ENTER, 
SLOW/SEARCH 
 / , SKIP+ |  /SKIP- | 
, R-TUNE, SELECT, SET, ZOOM, ANGLE, AUDIO, TITLE, SUB 
TITLE, MENU, or ADD/DLT/CLEAR are not available. Press FM/TV , DVD to use these functions.
  Depending on your DSS receiver or Cable box brand, some of the functions listed may not be remote controllable.
  Some DSS receiver or Cable box brands require you to turn on the power manually.
  Due to changes in infra-red commands used by manufacturers, some brands have several codes. If your unit does 
not respond to the  rst code, please try the next one.
DSS Brand Code Numbers
Toshiba .................................................................90
Hitachi/ Hughes ..............................................91, 99
Primestar..............................................................92
Drake....................................................................93
Magnavox .......................................................94, 95
Uniden ............................................................94, 95Optimus ..........................................................94, 95
Panasonic ............................................................96
ProScan ...............................................................97
RCA......................................................................97
SONY ...........................................................98, 105
Cable Box Brand Code Numbers
Archer.............................44, 06, 01, 120, 05, 63, 126
Cableview...........29, 09, 01, 63, 120, 44, 42, 30, 52, 
04, 124, 126
Citizen ....................44, 52, 30, 63, 42, 04, 124, 126
Curtis......................................08, 09, 25, 61, 53, 87
Century ......................................44, 51, 75, 59, 126
Cabletenna ...................29, 09, 01, 63, 120, 44, 126
Cable Cinema..................29, 09, 01, 63, 120, 44, 126
Diamond.........................29, 09, 01, 63, 120, 44, 126
Eagle .........................62, 40, 22, 13, 58, 20, 26, 107
Eastern...................................................28, 29, 130
Explorer...................................08, 09, 25, 61, 53, 87
Gemini....................................................30, 04, 124
General Electric.......................................01, 57, 120 
General Instruments............01, 84, 83, 34, 03, 02, 04, 
55, 65, 66, 67, 68, 120, 106, 
121, 122, 115, 117, 118, 124
Gerrard................................................44, 51, 75, 59
GC Electronics ................44, 42, 63, 29, 30, 52, 04, 
124, 126
Hamlin ................41, 14, 15, 28, 102, 104, 103, 130
Hitachi ..................................................................31
Jerrold ...............01, 84, 83, 34, 03, 02, 04, 55, 65, 66, 
67, 68, 120, 106, 121, 122, 115, 117, 118, 124
Jasco......................................................30, 04, 124
Macom..................................................................31
Magnavox.....................................................26, 112
Matsushita...................................17, 16, 08, 87, 109
Movietime........................32, 39, 42, 44, 126, 38, 40
Maestro...........................................................74, 35
NEC.....................................................40, 19, 38, 32
NSC.....................................................40, 19, 38, 32
Novavision...............................08, 09, 25, 61, 53, 87
Next Level....................01, 84, 83, 34, 03, 02, 04, 55, 
65, 66, 67, 68, 120, 106, 121, 122
Oak.................................................46, 11, 129, 101Oak Sigma .....................................46, 11, 129, 101
Panasonic ..................................17, 16, 08, 87, 109
Philips.....................23, 24, 20, 13, 07, 50, 128, 129
Pioneer .....................................................06, 05, 12
Pulsar .....................04, 42, 63, 44, 30, 52, 124, 126
Quest........................................................06, 05, 12
Radio Shack ...............................44, 51, 75, 59, 126
RCA............................................17, 16, 08, 87, 109
Realistic......................................44, 51, 75, 59, 126
Recoton ......................................44, 51, 75, 59, 126
Regal ..................41, 14, 15, 28, 102, 104, 103, 130
Regency .................................................28, 29, 130
Rembrandt .......44, 42, 63, 29, 01, 32, 39, 120, 126
Samsung ......................................42, 06, 32, 05, 40 
Scienti c Atlanta.....................08, 09, 25, 61, 53, 87
Sheritech ..............................................................27
Signal ...........................................................26, 112
SL Marx................42, 06, 32, 40, 43, 44, 52, 63, 126
Sprucer........................................17, 16, 08, 87, 109
Standard Components.................32, 39, 42, 44, 126
Stargate.................04, 42, 32, 40, 63, 44, 30, 52, 06, 
124, 126
Sylvania..........................................................19, 18
Teknika ...........................................................74, 35
Telecaption ...................................................77, 127
Teleview..................................40, 19, 38, 32, 42, 06
Texscan ..........................................................19, 18
Tocom...................................34, 33, 01, 42, 66, 120
Toshiba .................................................................36
Unika ............................44, 42, 63, 29, 01, 126, 120
Universal ..............................52, 43, 44, 63, 42, 126
Viewstar ...................62, 40, 22, 13, 58, 20, 26, 107
Videoway ..........................................07, 23, 50, 129
Vidtek ...................................................................64
Zenith ...............................................07, 23, 50, 129
Notes 
						

							28For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
When “ON” is selected, the picture is displayed 
even when a broadcast signal is weak or 
non-existent.
Weak Signal Display Feature
1
2
3
  “ON”  =  Picture is displayed regardless of signal 
condition, and may not always be clearly 
visible.
  “OFF” =  Screen turns solid blue when signal is absent 
or weak.
  If unit is connected to equipment which has blue back 
feature, selecting “ON” will have no effect on the other 
equipment.
4
Press ACTION to display MAIN MENU.
1) Press   to select 
“CH.”
2) Press SET to 
display SET 
UP CHANNEL 
screen.
Press ACTION twice to return to the 
normal screen.
1) Press  to 
select WEAK 
SIGNAL 
DISPLAY.
2) Press SET to 
set “ON” or 
“OFF.”
M A I N  MENU
DVDLOCK
CH
CLOCKTV
LANGUAGE
END         : ACT I ON SELECT  :                            SET : SET 
531
ANTENNA  :   CABLE
AUTO   SETWEAK  S I GNAL   D I SPLAY : OFF
SELECT :          SET       : SETEND       : ACT I ON  
           SET  UP  CHANNEL 
Special Features
Remote Warning Feature
1
Press ACTION twice to return to the 
normal screen. 
When Universal Remote Control (page 26) is used, 
and this feature is set to “ON,” a warning appears 
whenever an invalid key is pressed in DSS or 
Cable mode.
2
43
Press ACTION* to display MAIN MENU.
1) Press    
 to select “TV.”
2) Press SET to 
display SETUP 
TV screen.
1) Press     to 
select 
REMOTE 
WARNING.
2) Press SET to 
set “ON” or 
“OFF.”
 “REMOTE WARNING : OFF”
➞  Remote warning will not appear even if 
invalid key is pressed.
SELECT :          
END       : ACT I ON      
              SET  UP  TV   
SET : SET
CAPT I ON  
 I NPUT  SELECT       : TUNER SET  UP  V I DEO / AUD I ODVD  VOL  ADJUST   : + 2FM  ANTENNA            :  I NTREMOTE  WARNING     : ON
M A I N  MENU
DVDLOCK
CH
CLOCKTV
LANGUAGE
END         : ACT I ON SELECT  :                            SET : SET 
531
Selecting Input Mode
Method 1:Press CH   . The display will change as 
follows.
1
23
125 LINE1(CABLE)
69 (TV)
orLINE2
■  Auto Shut Off 
No broadcast signal in TV mode (Only when Weak 
Signal Display is set to OFF.), DVD stops for 5 
minutes.
➞ Power turns off   This feature is canceled if any button is pressed 
during above conditions.
Auto Operation Functions
Notes
Method 2:a Press ACTION for MAIN MENU.
b Press    
  
  to select “TV,” then press SET 
for SET UP TV screen.
c Press 
   to select “INPUT SELECT,” and 
then press SET to select “TUNER,” “LINE1” or  
“LINE2.”
d Press ACTION twice to exit this mode. 
						

							2929
Advanced Operation
*Important: If a remote control button does not work when pressed, press the FM/TV button on 
the remote and try the button again.
DVD Volume Adjust
1
Some DVDs are recorded in lower average volume 
level. For these DVDs, this unit can be set so that 
the average volume is increased automatically.
Press ACTION to display MAIN MENU.
2
1) Press   to select 
“TV.”
2) Press SET to 
display SET UP 
TV screen.M A I N  MENU
DVDLOCK
CH
CLOCKTV
LANGUAGE
END         : ACT I ON SELECT  :                            SET : SET 
531
3
1) Press  to 
select DVD 
VOL ADJUST.
2) Press SET to 
set the level (0, 
+1, or +2).
4
Press ACTION twice to return to the 
normal screen.
SELECT :          
END       : ACT I ON      
              SET  UP  TV   
SET : SET
CAPT I ON  
 I NPUT  SELECT       : TUNER SET  UP  V I DEO / AUD I ODVD  VOL  ADJUST   : + 2FM  ANTENNA            :  I NT
REMOTE WARNING :ON
LIGHT
TITLE MENUDISPLAY ADD/DLT
PAUSE
DSS
CABLE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
+VO
LC
H
CH V
OL
10
SUB TITLEANGLE
ZOOM AUDIO
OPEN/CLOSE
CLEAR
ENTER
MUTETIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
SURROUND
ADD / DLT
ACTION
CH
SURROUND
VSS  OFF
Enjoy a surround-like effect if you are using two 
front speakers only. The effect is broadened and 
sound seems to come from virtual speakers on 
either side if the disc has surround signals 
recorded on it.
Press SURROUND in DVD mode.  The Surround sound effects can be changed by 
pressing SURROUND repeatedly as shown by the 
 gure below.
  V.S.S. effects is available in DVD mode only.
 Turn off the surround effects on the other equipment. 
  V.S.S. will not work, or will have less effect, with some 
discs.
  Turn V.S.S. off if it causes distortion.
V.S.S. (Virtual Surround Sound) 
[DVD only]
You can hear a deeper, 3-D sound effect using just 
the unit’s two front speakers.
Press SURROUND.  “SURROUND ON” is displayed. 
SURROUND  ONTo Cancel, 
press SURROUND.
  Surround sound effect is not available for normal 
(mono) broadcasts. 
  The surround effect (TV mode only) is not output to 
Audio Output L/R Connector.
Surround Sound System
SURROUND  OFF
VSS1
VSS3VSS2 VSS OFF (default)
Notes
Notes
SELECT
SET 
						

							30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Press ACTION* to display MAIN MENU.
Enter Secret Code
A 4-digit code must be entered to view a blocked 
program or change rating settings.
1
  DO NOT forget your secret code.
  Once ratings are set, restricted programs 
cannot be accessed unless the secret code is 
entered.
Changing your secret code
 You will need your current code.
Do steps 1 ~ 3. In step 4, press CLEAR to clear 
current code.
Repeat steps 3 and 4 to enter new code.
Process of V-Chip Control Feature
SetupBlockingEnter Code
Press SET to display 
US Ratings menu (see 
pages 31, 32).
Or
Press ACTION twice 
to exit.
4
1) Press NUMBER 
keys to enter your 
secret code.
2)  Enter same code 
again for 
con rmation.
3
  Step 2) not necessary when changing rating or 
secret code.
  Take care that you are not observed entering the 
secret code.
To Make Corrections
Press  
 repeatedly to move the cursor.
Press NUMBER keys to make the correction.
1) Press    
  
 to 
select “LOCK.”
2) Press SET to 
display LOCK 
screen.
2
V-Chip Control Feature is...This unit has a built-in V-Chip Control which allows you 
to block unwanted TV usage based on US MOVIES and 
US TV PROGRAMS Ratings.
LOCK   
RECOGN I ZED
CHANGE  CODE : ADD / DLT   
CONT I NUE : SETEND       : ACT I ON         
CONF I RM   4-D I G I T   CODE
****
****
BACK  SPACE:ENTER  : 0 - 9  
END       : ACT I ON    
           LOCK   
ENTER  4-D I G I T   CODE
- -  
M A I N  MENU
DVDLOCK
CH
CLOCKTV
LANGUAGE
END         : ACT I ON SELECT  :                            SET : SET 
531
V-Chip Control Feature 
LIGHT
TITLE MENUDISPLAY ADD/DLT
PAUSE
DSS
CABLE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
+VO
LC
H
CH V
OL
10
SUB TITLEANGLE
ZOOM AUDIO
OPEN/CLOSE
CLEAR
ENTER
MUTETIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
SURROUND
NUMBER
key
CLEAR
ACTION SELECT
SET
Notes