Panasonic Tv Dvd Combination Pv 9d53 Operating Instructions

11
Remote control
Page
POWER Power On/Off 15,16,26
TV Switch to operate TV/AV 15
DVD Switch to operate DVD 26
OPEN/CLOSE Open or Close the tray 27,29,40
0-9 Direct channel selection of TV 16,20
Input setting 29,30,31
Enter a password 21,23,38~40
INPUT Switch between TV/AV 43
VOL +
/–
Adjust volume of TV 16
DISPLAY Call TV information 17,22
Call DVD information 26
DVD MENU Display DVD menu 34
SETUP/TV MENU
TV mode - Display menu of TV15,19~24DVD mode - Call up initial setup mode35~39
CH 
/Select channel...

12
BATTERY INSTALLATION
OPERATION•Aim the remote control at the remote sensor and
press control buttons to operate.
•Operate the remote control within 30° angle on
either side of the remote sensor, up to a dis-
tance of Approx. 5 meters.
Do not leave the remote control unit exposed to direct
sunlight or in hot or humid places.
The remote control unit uses infrared beams to
transmit signals, so sunlight or fluorescent light on the
remote sensor may shorten operating distance.
Incorrect use of batteries...

13
NOTES:•ALWAYS TURN THE TV/DVD TO “OFF”
BEFORE SWITCHING THE IGNITION OF
THE CAR ENGINE.
•Make sure that the negative terminal of the
battery is grounded.
This set is designed for use with negative
grounding systems only.
•Use the supplied car cord only.
•
When the TV/DVD is not in use, always discon-
nect it from the car cigarette lighter socket to
avoid a battery drain.
•If the TV/DVD is to be directly connected to a
12V DC power source, for example, recrea-
tional vehicle (RV) applications, make...

14
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable service not requiring a Converter/Descrambler
box, connect the CATV 75 ohm Coaxial Cable directly to the
Antenna Jack on the back of the TV/DVD.
Cable TV connections
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
75 ohm
Coaxial Cable
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box...

15
NOTES:
•
•
<     /     /     /     /MENU>
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<     /     /     /     /MENU>
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
4
Setting the on screen display language
You can choose from three different languages (English, French and Spanish) for the on-screen displays.
Adjustment menus and messages will appear in the language of your choice.
On-screen language selection (step 5) will automatically appear on the screen when you press the TV MENU
button initially. Select the language you...

16
CATV
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A) TV
VHF
2-13
UHF
14-69
TV operation
If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
If a station being viewed stops
broadcasting, the TV will automati-
cally shut itself off after 15 minutes.To turn on the TV/DVD, press POWER. Press TV to select TV
mode.
Set the TV/CATV menu
option to the appropriate
position. (See page 19.)
TV -...

17
DISPLAYPress DISPLAY to display the
current information on the screen.
Press DISPLAY again to clear the
call display.
CHANNELPress and release CH  or . The
channel automatically stops at the
next channel set into memory.
For proper operation, before select-
ing channels, they should be set into
the memory. See pages 20 and 21
“To memorize channels”.
R-TUNEThis button allows you to go back to
the last channel selected by press-
ing R-TUNE. Press R-TUNE again
to return to the last channel you
were...

18
NOTES:
Captions: This Closed Caption Mode will display text on the
screen in English or another language (depending on the set-
ting of the Closed Captions CH 1/2).
Generally, Closed Captions in English are transmitted on Cap-
tions Channel 1 and Closed Captions in other languages are
transmitted on Captions Channel 2.
The Captions will appear in places on the screen where they will
least interfere with the picture, usually on the bottom of the screen.
News programs will usually show three-line Closed...

19
<     /     /     /     /MENU>
TV/CATV
ADD/DELETECATV
ADD
AUTO CH MEMORY
<     /     /     /     /MENU>
TV/CATV
ADD/DELETECATV
ADD
AUTO CH MEMORY
To memorize channels
Press TV to select TV mode,
then press TV MENU. The TV
menu screen will appear.
Press 
 or  until the SET UP
menu appears. This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be pro-...

20
Repeat steps 1-6 for other channels
you want to add or delete. Press TV MENU until the MENU
screen is cleared.
<     /     /     /     /MENU>
TV/CATV
ADD/DELETECATV
DELETE
AUTO CH MEMORY
<     /     /     /     /MENU>
TV/CATV
ADD/DELETECATV
ADD
AUTO CH MEMORY
<     /     /     /     /MENU>
TV/CATV
ADD/DELETECATV
ADD
AUTO CH MEMORY
<     /     /     /     /MENU>
TV/CATV
ADD/DELETECATV
ADD
AUTO CH MEMORY
<     /     /     /     /MENU>
TV/CATV
ADD/DELETECATV
ADD
AUTO CH MEMORY
Press TV to select TV mode,...