Panasonic Tv Dvd Vcr Combination Pv Df203 Operating Instructions

3131
Advanced Operation
*Important: If a remote control button does not work when pressed, press the TV/VCR button on the 
remote and try the button again.
  Repeat Play
Set to see a recording over and over.
PLAY REPEAT  ON
To turn “ON,”press PLAY/REPEAT on the unit repeatedly in 
Playback mode to select “REPEAT ON.”
To turn “OFF,”repeat above to select “REPEAT OFF.”
  Playback repeats when tape end is reached or 
an unrecorded portion longer than 30 seconds is 
detected.
  For repeat play in DVD mode,...

32For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tape Operation (continued)
  Zero Search
To quickly return to a speci c tape counter 
location. 
1
2
Press STOP.
4
5 3
Continue playback, rewind, or fast 
forward.
Press COUNTER 
RESET at the 
desired position to 
reset to “0:00:00.”
Press DISPLAY* during playback to 
display the Counter.
Press...

3333
Advanced Operation
Press CM/ZERO repeatedly to select skip time in 
Playback mode.
  Commercial Skip
By pressing the CM/ZERO button in Playback mode you 
can skip over 1 to 3 minutes of recorded tape in just a few 
seconds.
  No indication appears.
■  Auto Shut Off 
No broadcast signal in TV mode (Only when Weak Signal 
Display is set to OFF.), DVD stops, or blank tape is played 
for 5 minutes. 
➞ Power turns off   This feature is canceled if any button is pressed during above 
conditions.
■  Auto...

34For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
When “ON” is selected, the picture is displayed 
even when a broadcast signal is weak or 
non-existent.
  Weak Signal Display Feature
1
2
3
  “ON”  =  Picture is displayed regardless of signal 
condition, and may not always be clearly 
visible.
  “OFF” =  Screen turns solid blue when signal is absent...

3535
Advanced Operation
  VCR Lock
All operations are prohibited except Timer 
recording and tape eject. Useful for families with 
small children.
In Stop mode, hold 
down REC on 
the unit without a 
cassette inserted for 7 
seconds to turn “ON.” 
(Please ignore “NO 
CASSETTE” warning.)
Repeat above with or 
without cassette to turn 
“OFF.”
  VCR Lock is canceled automatically after about 24 
hours if clock is set.
*Important: If a remote control button does not work when pressed, press the TV/VCR...

36For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Press ACTION* to display MAIN MENU.
 
Enter Secret Code
A 4-digit code must be entered to view a blocked 
program or change rating settings.
1
  Some rental movies do not include V-Chip 
data.
  DO NOT forget your secret code.
  Once ratings are set, restricted tapes or 
programs cannot be accessed...

3737
Advanced Operation
1
1) Press  to select 
US MOVIES.
2) Press SET to set 
“ON” or “OFF.”
If LOCK menu is not displayed, perform “Enter 
Secret Code” steps on page 36.
■ “ON” 
➞ V-Chip Control is activated.
■ “OFF” ➞ V-Chip Control is deactivated.
 
US MOVIES RatingsUS MOVIES RATINGS
*Important: If a remote control button does not work when pressed, press the TV/VCR button on the 
remote and try the button again.
2
1) Press  to 
select CHANGE 
SETTINGS.
2) Press SET to 
display screen.
3
1) Press  to...

38For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
US TV PROGRAMS RATINGS: Chart 1
US TV PROGRAMS RATINGS: Chart 2
1
1) Press    * to 
select US TV 
PROGRAMS.
2) Press SET to set 
“ON” or “OFF.”
  US TV PROGRAMS Ratings
If LOCK menu is not displayed, do “Enter 
Secret Code” steps on page 36.
US   MOV I ES                       : OFF
       CHANGE...

3939
Advanced Operation
*Important: If a remote control button does not work when pressed, press the TV/VCR button on the 
remote and try the button again.
  Blocking Message
  If a program or movie 
exceeds the ratings you 
have set, a message 
will appear on a black 
background and sound is 
muted.

To View a Blocked Program/Movie
[Temporarily Deactivate V-Chip Control]
Enter your secret code (ACCESS CODE) in the 
Blocking Message screen.
  V-Chip Control is reactivated when power is turned off 
or...

40For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
With the proper audio mode 
setting, your unit can:
 Record and playback MTS stereo broadcast 
(main language) in stereo Hi-Fi. Stereo sound is 
recorded on the left and right audio tracks and 
on the video portion of a tape.
  Record and playback a monaural broadcast 
(main language) or SAP...