Panasonic Video Board Aw Pb605p Operating Instructions
Have a look at the manual Panasonic Video Board Aw Pb605p Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Before attempting to connect, operate or adjust this product, please read these instructions completely. Video board Model AW- P F1101W @ Printed in Japan VQT9563P
2 indicates safety information. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
3 Introduction This is an additional video board which is designed exclusively for use with the AW-RP605 Multi-Function Controller. Up to 4 of these video boards can be added to the AW-RP605 Multi-Function Controller, thereby making it possible to connect 5 video boards in all. Contents Introduction . . . . . . . . . . . . . . . . . . . . . . .3 Precautions for use . . . . . . . . . . . . . . . .3 Installing additional video boards . . . .4Inserting an optional card . . . . . . . . . . .5 Specifications . . . . . . . . . . . . . . . . . . . . .6 Precautions for use OTurn off the power before connecting or disconnecting the cable! Before connecting or disconnecting the cable, ensure that the power is turned off. OHandle the board carefully! Do not drop the board or subject it to strong shock. Doing so may cause malfunctioning or accidents. OUse the board in temperatures of between 14°F (–10°C) and 113°F (+45°C)! Avoid using the board at temperatures below 14°F (–10°C) or above 113°F (+45°C) as the internal parts may be adversely affected. Refer to the Operating Instructions of the AW-RP605 Multi-Function Controller for further details on how to connect this board.
4 Installing additional video boards (The installation work must be performed by your dealer without fail.) The multi-function controller AW-RP605 comes with four slots for installing additional video boards. By adding the AW-PB605 video boards, up to five pan-tilt head systems can be controlled. 1. Remove the two screws and take off the blank panel. 2. Align the AW-PB605 video board with the guides, and insert it. Push it in all the way. 3. Attach the board securely using the two screws.Before adding a board to the multi-function controller OSet the power switches of all components to the OFF position, and disconnect the power cords from the power outlets. ORelease the static carried in the body of the person to perform the installation. Installation can be performed more safely if an anti-static wrist strap is worn. Touching the board without first releasing this static may cause malfunctioning. ODo not allow the metal part of the board come in contact with any other metal parts. Guides Refer to the Operating Instructions of the AW-RP605 Multi-Function Controller for further details on how to connect this board.
5 Inserting an optional card (The installation work must be performed by your dealer without fail.) The AW-PB605 video board comes with a slot into which an optional card (optional accessory) for additional functions can be inserted. ORGB card (AW-PB302) OSDI card (AW-PB304) OSVGA convert card (AW-PB307) OWeb card (AW-PB309) 1. Remove the two screws, followed by the blank panel. 2. Align the optional card with the guides and insert it. Push it in all the way. 3. Attach the card securely using the two screws. To remove the optional card, insert a flat-head screwdriver or similar tool as shown in the figure on the right, and pull out the card in the direction shown by the arrow.Before inserting an optional card OSet the power switches of all components to the OFF position, and disconnect the power cords from the power outlets. ORelease the static carried in the body of the person to perform the installation. Installation can be performed more safely if an anti-static wrist strap is worn. Touching the card without first releasing this static may cause malfunctioning. ODo not allow the metal part of the card come in contact with any other metal parts.
6 Specifications Ambient operating temperature 14°F to 113°F (–10°C to +45°C) Storage temperature –4°F to +140°F (–20°C to +60°C) Ambient operating humidity 30% to 90% (no condensation) Weight 1.034 lb (0.47 kg) Dimensions (WaHaD) 4 5/8˝a2 3/16˝a5 1/2˝ (117a55a139 mm) $Input connectors VIDEO/Y IN, Pr IN, Pb IN BNC a3, 75Ωtermination, 7.5% setup Composite: Y = 100 IRE Sync = 40 IRE Burst = 40 IRE Component: Y = 0.714 V Sync = 0.286 V Pr/Pb = 0.700 V $Output connectors G/L OUT connector BNC, 75Ωoutput Connecting cable: BELDEN 8281, max. 3,280 feet (1,000 meters) VIDEO/Y OUT, Pr OUT, Pb OUT BNC a3, 75Ωoutput, 7.5% setup Composite: Y = 100 IRE Sync = 40 IRE Burst = 40 IRE Component: Y = 0.714 V Sync = 0.286 V Pr/Pb = 0.700 V (Cable compensation must be adjusted.) $Other OPTION card slot Card supported: AW-PB302, AW-PB304, AW-PB307, AW-PB309 Power supply:DC 10.8 V to DC 16 V Power consumption:4.8 W indicates safety information.
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WESTERN ZONE: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 Government Marketing Department: 52 West Gude Drive, Rockville, MD 20850 (301) 738-3840 Broadcast PARTS INFORMATION & ORDERING: 9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880 Emergency after hour parts orders (800) 334-4881 TECHNICAL SUPPORT: Emergency 24 Hour Service (800) 222-0741 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127 Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc. San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630 (787) 750-4300
Avant de raccorder, de faire fonctionner ou de régler l’appareil, lire attentivement tout ce manuel. Plaque vidéo Modèle AW- P
– 2 – indique les consignes de sécurité. ATTENTION RISQUE DE CHOCS ÉLECTRIQUES NE PAS OUVRIR ATTENTION: AFIN DE PRÉVENIR LE RISQUE DE CHOCS ÉLECTRIQUES, NE PAS RETIRER LES VIS. TOUTE RÉPARATION DEVRAIT ÊTRE CONFIÉE À UN PERSONNEL COMPÉTENT. Le symbole de l’éclair dans un triangle équilatéral indique la présence d’une tension suffisamment élevée pour engendrer un risque de chocs électriques. Le point d’exclamation dans un triangle équilatéral indique que le manuel d’instructions inclus avec l’appareil contient d’importantes recommandations quant au fonctionnement et à l’entretien de ce dernier. MISE EN GARDE: AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE OU DE CHOCS ÉLECTRIQUES, ÉVITER D’EXPOSER CET APPAREIL À LA PLUIE OU À UNE HUMIDITÉ EXCESSIVE. ATTENTION: AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE, DE CHOCS ÉLECTRIQUES OU D’INTERFÉRENCES, N’UTILISER QUE LES ACCESSOIRES RECOMMANDÉS.