Panasonic Wide Lcd Television Tc 32lx300 Operating Instructions

							41
ROOT
DCIM
P1000001.JPG
P1000002.JPG
P1000003.JPG
P1000004.JPG
100_PANA
SD_VIDEO
MOL001.ASF
MOL002.ASF
MOL003.ASF
MOL004.ASF
PRL001
Created automatically
 
Folder names consist of a 3-digit folder number 
which is followed by five arbitrary characters.
File names consist of four arbitrary characters 
followed by a 4-digit file number.
Example folder structure
When the Card file hierarchy is displayed on the PC as shown below.
Notes:
•
Folder and file names may vary according to the digital still camera.
•Use the characters “a-z”, “A-Z”, “0-9” and “_” to name a directory or a file. Do not use two-byte characters or other
special codes. •Picture Menu can only show still images recorded by a digital still camera with DCF
∗ and EXIF standard JPEG file.
∗DCF (Design rule for Camera File system)
Unified standard established by Japan Electronics and Information Technology Industries Association (JEITA).
•Movie Menu can only show animated pictures recorded by this unit or a digital camera with MPEG4 standard ASF file.
•Memory cards must be formatted with FAT12 or FAT16 in order to be viewed on TV. If the card is not formatted, it may
cause incompatibility with certain memory card adapters. If this happens, reformat the card using your digital camera.
Reformatting the card will erase the images stored in it. Refer to your camera manual for more information.
•Maximum number of files that can be displayed: 65,535.
•Picture resolution: Compatible in the range 8 x 8 -  5,120 x 3,840
•If the image is imported from a PC, it must follow the EXIF (Exchangeable image file format) 2.0, 2.1, 2.2 in addition to the
DCF (design rule for Camera File system) format.
•The JPEG modified using a PC will not be displayed on TV.
•This function cannot display Motion JPEG and still image not DCF formatted (i.e. TIFF, BMP).
•If the file is partially corrupted, it may be shown in lower resolution.
•The displayed image size depends on the recorded image size.
•The number of pixels for movies is 320 x 240 (QVGA) or 176 x 144 (QCIF).
•When the number of files exceeds 65,535, no further video recording is possible.
•The audio format used is G.726 (32 Kbps, 8 kHz sampling frequency, monaural).
Card operations
Folders and Files 
						

							42
Card operations
TV
MENU
VCRDVD
RCVR
LIGHT
A -ANTENNA - B
SAP
AUX
ASPECT
MUTERECALL
SLEEP
CH
VOL
CHVOL
OK
POWER
DTVDBS/CBL
EXIT
TV/VIDEO
SD Menu
Insert the card into the card slot
(see page 40).1
Press to display the SD Menu.2
To
 return to the SD Menu.
To  exit Card operation
Press to return to the SD Menu.
Press to return to normal picture.
EXIT
OR
The present channel recording will start. Please set up Record Setting b\
efore recording (see page 45).
CH
VOL
CHVOL
OK
Press to select SD Record.
Press to start recording.
If the remaining time is not
enough or Rec Time in Record
Setting is set to Not Set, the
message will appear.
OR
Yes:  Start recording
No : Cancel
To  stop the recording
1Press to display the SD Menu.
2
CH
VOL
CHVOL
OK
P
r e s s   t o   s e l e c t   S t o p   R e c o r d i n g .
Pr e s s   t o   s t o p   r e c o r d i n g .
No t e s :
•If   t h e   c h a n n e l   i s   c h a n g e d   d u r i n g   R e c o r d i n g ,   r e c o r d   c h a n n e l   d o e s   n o t   c h a n g e .
•Wh e n   t w o   c h a n n e l s   a r e   s h o w n   o n   t h e   s a m e   s c r e e n   a s   s p l i t   f r a m e s ,   t h e   M a i n   p i c t u r e   i s   t h e   o n e   t h a t   i s   r e c o r d e d .  Th e
ch a n n e l   c a n   b e   c h a n g e d   f o r   t h e   S u b   p i c t u r e .
•Th e   p o w e r   b u t t o n ,   S A P   b u t t o n   a n d   t u n i n g   b u t t o n s   f o r   t h e   m a i n   p i c t u r e   d o   n o t   w o r k   w h i l e   v i d e o   r e c o r d i n g   i s   i n
pr o g r e s s .
When the SD Menu is displayed, press to return to normal
picture.
 Remaining time is not enough  
Rec Time is set to Not Set
Notes:
•
Picture or Audio adjustment is possible by pressing MENU button during SD Record.
•V ideo recording is possible on the analog channels only. However, it is not possible on restricted channels.
•T o check the video recording information, press the RECALL button.
• If the SLEEP timer is activated during video recording, the recording will stop and \
the power will be turned off
regardless of the Rec Time setting.
• When a program’s Rating setting has been exceeded during video recording, the recording\
 will stop. Video recording
resumes as soon as the Rating is released. (A new file is created when recording is resumed.) Video recording does
not resume if the channel has been switched.
• SD video recording may not be fully compatible or playable in some PC so\
ftware or PDA devices.
SD Menu
Movie Menu
Record Setting
Format
Memory Left
SD Record
Picture Menu
Not  enough memory
Current  Setting
  Programmed 30min
  Rec Mode  Economy
  Recordable 19min
Start  Recording?
No   Yes
19  mins  recordable  at
Economy
Start  Recording?
No   Yes
SD Menu
Movie Menu
Record Setting
Format
Memory Left
Stop Recording
Picture Menu
SD Record 
						

							43
Ca r d   o p e r a t i o n s
Th e   a n i m a t e d   p i c t u r e s   r e c o r d e d   b y   t h i s   u n i t   o r   b y   a   d i g i t a l   c a m e r a   w i l l   b e   p l a y e d  
back.This function is supported by SD cards only.
CH
VOL
CHVOL
OK
Press to select Movie Menu.
Press to display the thumbnail screen.
Select the thumbnail image.
Press to start the animated picture.
During the playback
CH
VOL
CHVOL
OK
1
2Play Movie
0001/0002
SD DELETE
SELECT
PLAY
MENU EXIT LOCK/
UNLOCK
TV/
VIDEO
Filename  MOL001
Date  
2000/01/01SD
CH
VOL
CHVOL
OK
1
2
Press to select Set Up.
Press to display the sub-menu.
MENU
Press to display MENU duing Movie Menu.
Notes:
•
Picture, Audio or Set Up adjustment is possible by pressing MENU button during Mo\
vie Menu.
• “Date” shows the date on which the video recording was made by the\
 digital camera. Its format is 2000/01/01 when
video recordings are made using this unit.
 Frame Size (Large or Normal)
Select the Frame size of the playback picture.
 Repeat (No, One File or All)
Select the repeat mode.
MENU
Audio Picture
Set Up
Set Up
Repeat Frame Size Normal
No
CH
VOL
CHVOL
OK
Set Up
(
  
) Press to pause.
(  
 ,  ) Press to skip the picture.
Press and hold to REW / FF.
(  
 
) Press to playback.
(  
 
) Press to stop.
A  -ANTENNA
Lock / Unlock the file
Press to lock the file.
Press again to unlock.
Delete the file
ANTENNA - BPress to delete the file.
Note:
If the file is locked, it is not possible to delete. Select the thumbnail image you want to lock.
Select the thumbnail image you want to delete. Selected File
Movie Menu
Error display
(images that could
not be loaded, etc.)
Inserted card displayed (this
does not appear for PC cards) Movie without sound
Movie for which lock has been set
When the operation guide is not displayed, press the
RECALL button to display it.
Notes:
• When the operation guide is not displayed, the volume can be adjusted us\
ing the VOL buttons.
• The operation guide can be displayed or cleared by pressing the RECALL b\
utton.
• During movie play, no signals are output from the monitor output and digital audio output\
 terminals.
• During movie play, the screen’s Aspect ratio cannot be switched. 
						

							44
CH
VOL
CHVOL
OK
Card operations
CH
VOL
CHVOL
OK
Press to select Picture Menu.
Press to display the thumbnail screen.
The still images recorded by the digital camera will be displayed.
This function supports both SD cards and PC cards.1
2
Select the thumbnail image.
Press to display the image.
Notes:
• Picture or Set Up adjustment is possible by pressing MENU button during \
Picture Menu.
• The aspect of the image can be changed by pressing ASPECT button during single mode and Slideshow.
R o t a t e   /   S k i p
Al l o w s   y o u   t o   r o t a t e   t h e   i m a g e   d u r i n g   s i n g l e   m o d e .
Wh e n   t h e   o p e r a t i o n   g u i d e   i s   n o t   d i s p l a y e d ,   p r e s s   t h e   R E C A L L   b u t t o n   t o   d i s p l a y   i t .
Pr e s s   t o   s k i p   t o   t h e   n e x t   o r   p r e v i o u s   i m a g e .
Pr e s s   t o   r o t a t e   t h e   p i c t u r e   n i n e t y   d e g r e e s .
Pr e s s   t o   d i s p l a y   t h e   t h u m b n a i l   s c r e e n .
CH
VOL
CHVOL
OK
1
2
MENU
Set Up
Press to display MENU during Picture Menu.
Press to select Set Up.
Press to display the sub-menu.
Set Up
Interval Slideshow
5sec
Card Setting
Repeat Off
SD
2
Press to select Interval or Repeat.
Press to select the settings.
• Interval : Allows you to change the length of time that a slide is being
displayed on screen. (5sec, 10sec, 15sec, 30sec, 60sec, 90sec,
120sec)
• Repeat : On or Off
1
 Slideshow
Select the settings of Interval and Repeat before starting the Slideshow\
.
CH
VOL
CHVOL
OK
CH
VOL
CHVOL
OK
Press to select Slideshow.
Press to start Slideshow.
Press again to stop.
 Card Setting
Select either SD or PC when both cards are inserted in the slots. (Not \
selected when one card is inserted.)
CH
VOL
CHVOL
OK
Picture Menu
Inserted card displayed
(this does not appear for a
card which is not selected)
Play Picture
0001/0002
SELECT
OK
MENU EXIT
Filename   P1020184
Date  200 3/12/06
Pixel   2048x1536
SD
SD
TV/
VIDEO 
						

							45
Card operations
CH
VOL
CHVOL
OK
Press to select Record Setting.
Press to display the sub-menu.
 Rec Mode (Extrafine, Superfine, Fine, Normal, Economy)
The quality of picture can be changed.
Press to select Rec Mode.
Press to select the recording mode.
 Rec Time (Not Set, 5 min, 10 min, 15 min, 30 min, 60 min, 90 min, 120 min, 180 min)
Set the recording time before recording.
Press to select Rec Time.
Press to select the recording time.
Note:
If you set Rec Time to Not Set, the recording does not stop automatically until the card is fully recorded.
Record Setting
Rec Time Rec Mode
Economy
Not Set
CH
VOL
CHVOL
OK
CH
VOL
CHVOL
OK
Record Setting
Note:
Multi Media Cards do not support the Extrafine or Superfine recording mode. If video recording is started in this status,
recording will automatically be performed in the Fine mode. 
						

							46
Card operations
CH
VOL
CHVOL
OK
You can format the card.
Press to select Format.
Press once.
The message will appear to confirm.
CH
VOL
CHVOL
OK
Press to select Yes.
Press to start format.
Notes:
•If the card is formated, all data is erased.
•Only cards that are supported by the SD card slot can be formatted.
You can confirm the remaining time for recording in each Rec Mode.
CH
VOL
CHVOL
OK
Press to select Memory Left.
Press to display the memory left.
1
2
All data shall be erased
Proceed?
No Yes
Memory Left
Recordable Min
Press  MENU  to  return13 MB
Economy 17Min
Normal 5Min
Fine 4Min
Superfine 1Min
Extrafine 1Min
Format
Memory Left
Note:
Since Multi Media Cards do not support the Extrafine or Superfine recording mode, “ --- ” appears. 
						

							47
Card operations
Insert a card.
Unlock the SD card.
Unlock the file in the card.
The card must be formatted with FAT 12 or FAT 16.
Still image must be with DCF and EXIF standard JPEG file.
Animated picture must be with MPEG4 standard ASF file.
Incompatible card is inserted.
The file is broken.
The card memory is full.
The card does not have enough memory to operate.
The file is not readable.
Video recording is possible on the analog channels only.
However, it is not possible on restricted channels.
Re-insert the card. If the error persists, format the card.
The power button, SAP button and tuning buttons for the
main picture do not work while video recording is in progress.“Is SD card In?”
“Locked SD. Check Card”
“Locked File. Unlock to delete”
“
Not supported”
“Broken File. Cannot display image”
“Memory Full”
“Not enough memory”
“Cannot Read File”
“Unrecordable Source”
“Error. Check Card”
“SD Recording.
  Stop recording to operate”
Error messages 
						

							48
CH5 CH10CH10 CH5
SPLIT Operation
This feature lets you watch two different channels side by side with or without an external video source.
1Press to display the SPLIT frame.
Notes:
• Audio is from Main picture only.
• SPLIT frame displays analog channel signal of ANTENNA (A) only, and cannot
display ANTENNA (B) or digital channel signal.
Select the channel.Press to select the channel.
You can also use the numbered buttons.
To  cancel the SPLIT operation
In the Main picture
Main picture SPLIT frame SPLIT frame
(The previously selected
screen appears.)
In the SPLIT frame
2
SPLIT PLAY
SPLIT CH
DVD/VCR CH
CH
VOL
CHVOL
OK
TV
MENU
PROG
EXIT
VCRDVD
RCVR
LIGHT
A 
-ANTENNA - B
SAP
AUX
ASPECT
MUTERECALL
STOPPAUSEREC
CH
VOL
CHVOL
OK
POWER
123
456
78
0
9
TV/VCR
R-TUNE
FF
SPLIT
PLAY
DTVDBS/CBL
SLEEP
TV
OPEN/CLOSESPLIT CH
DVD/VCR CH
TV/VIDEO
SWAP
REW
SWAPREW
SPLITPLAY
Main picture
To  select the input mode of SPLIT frame
CH10
TV/VIDEO
Notes:
•The Main picture and the SPLIT frame are processed in separate circuits, and may have slight difference in image
quality.
•Y ou cannot display the same picture in the Main picture and the SPLIT frame at the same time.
•S WA P is not possible when main picture signal is ATSC digital channel. The input mode changes in SPLIT frame.
 
  C H #   CH # Comp 1 Comp 2
Video 1
Video 2Video 3
Main picture SPLIT frame
To  swap the pictures 
						

							49
Aspect Controls
Lets you choose the aspect depending on the format of the received signal and your preference.
Press to change the aspect mode.
Displays a 4:3 picture at its standard 4:3 size with
gray side bars. (It may create an after-image on
screen if displayed for a prolonged period of time.)
Expands a 4:3 picture uniformly (width and height)
to full screen width and then repositions the picture
vertically. (Recommended for letterbox. This will
show picture at full screen size.)
Displays a picture at full screen size. (Recommended
for anamorphic pictures.)
Stretches the right and left edges of a 4:3 picture to
fill the screen, and the center of the screen has aspect
correction applied. The size of the picture depends
on the original signal.
(Recommended for regular TV viewing.)
Mode
Picture Explanation
4 : 3
Zoom
JustFull
ASPECT
Just4
39 16
Full4
316
9
4 : 3
3 4
Zoom4
316
9
Note:
The available aspect modes depend on the input signal.
• 480i : 4:3, Full, Just and Zoom
• 480p (4:3) : 4:3, Full and Zoom
• 480p (16:9) : 4:3, Full and Zoom
• 1080i : 16:9 only
TV
MENUEXIT
VCRDVD
RCVR
LIGHT
A -ANTENNA - B
SAP
AUX
MUTERECALL
DTVDBS/CBL
SLEEP
CH
VOL
CHVOL
OK
POWER
TV/VIDEO
ASPECT 
						

							50
Operating peripheral equipment using the remote control
Programming the remote control code
You can operate other manufacturers’ components using this TV’s remote control.
Preparations:
•Connect the power cord of the external component to the wall outlet.
•Make sure the component is turned off.
1
TV VCR DVD
DTV
RCVRDBS/CBLAUX
2
POWER
  +  
CH
VOL
CHVOL
OK
123
456
78
0
9
3
Press and hold POWER and OK together, for
at least 5 seconds.
•The mode selection buttons flashes, and then
release the POWER and OK buttons.
Select the type of the component.
•The selected button lights and all others go
out.
Enter the 3-digit infrared code (see pages 51-53).
•Factory default setting : Panasonic
•Press POWER to test the operation.
Notes:
•If the component does not operate with the remote control, repeat the procedure
using another code. (Some brands have multiple codes.)
•If an incorrect code is entered, or if the procedure takes longer than 30 seconds,
the programming will fail.MENU
PROG
EXIT
LIGHT
A -ANTENNA - B
SAP
ASPECT
MUTERECALL
STOPPAUSEREC
CH
VOL
CHVOL
OK
TV/VIDEO
123
456
78
0
9
TV/VCR
POWER
TVVCRDVD
RCVRAUX
R-TUNE
FF SPLIT
PLAY
DTVDBS/CBL
SLEEP
TV
OPEN/CLOSESPLIT CH
DVD/VCR CH SWAP
REW
After selecting the type of component (step 2, above)1
2
Press to store the code.
CH
VOL
CHVOL
OK
Press to select the code.
• The code starts from the current device.
• Press POWER button to test the operation.
• Repeat the steps until the component code is found.
It may take many attempts before the correct code
is found.
CH
VOL
CHVOL
OK
To find a code not listed in the index