Panasonic Wifi Connection With Digital Camera Dmc Ts5 Quick Guide

							2
Connecting the camera to the smartphone/tablet (Remote Shooting)
1
Installing the smartphone/tablet app “Image App”
Image App

Image AppImage App
You can connect Wi-Fi
 

® compatible devices to the camera wirelessly.
You can connect them directly or via a wireless access point.
 

When connecting the camera to a 
smartphone/tablet directly
Select “Google Play
TM Store”.
Select “App Store
SM”.
Android
TM
iOS When connecting the camera to a TV or 
PC, etc. via a wireless access point
To change the connection method, press [DISP.].
(Such as [ WPS Connection], [ Via Network], etc.)
Please refer to “Owner’s Manual for advanced features” (PDF) for details.
SSID refers to the name that is used to identify a network over a wireless LAN 
 

connection. If the SSID matches for both devices, transmission is possible.WPS (Wi-Fi Protected Setup
 

TM) refers to a function that allows you to easily con fi gure 
the settings related to the connection and security of wireless LAN devices
.
Android and Google Play are trademarks or registered trademarks of Google Inc.
 

App Store is a service mark of Apple Inc.
 

“Wi-Fi” and “Wi-Fi Protected Setup” are marks or registered marks of the Wi-Fi Alliance.
 

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certi fi cation marks of the Digital Living Network 
 

Alliance.
Connecting the camera to a smartphone/tablet
Let’s connect to the Wi-Fi
VQC9362
Wi-Fi
® Connection Guide
The camera is not capable of connecting to a wireless network via public 
wireless LAN.
Digital Camera
Model No. DMC-TS5
Read the [Help] in the “Image App” menu for further details on how to operate.
Operation on the smartphone/tablet Operation on the camera
1
4 3
67
2
5
Operation on the smartphone/tablet
Select [New Connection].
Select the same SSID as 
the one displayed on the 
screen in step 
3. Select [Remote Shooting].
Enter the password 
displayed on the screen 
in step 
3, and connect . 
The SSID and password 
are displayed.
Start “Image App” on 
your smartphone/tablet.When the connection is 
established, the recording 
screen is displayed.

  Press camera [ON/OFF] button.

 Press [Wi-Fi].
On the setting menu 
of your smartphone/
tablet, turn on the Wi-Fi 
function.
The service may not be able to be used properly depending on the 
 

type of smartphone/tablet being used. For compatible devices, see 
the following support site.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)When downloading the app on a mobile network, high packet communication 
 

fees may be incurred depending on the details of your contract.
You can select the setting 
you used before from [History 
Connection].
Please refer to “Owner’s Manual 
for advanced features” (PDF) for 
details.
Make sure the Wi-Fi connection 
lamp 
 is lit blue.
Lit blue: 

The Wi-Fi connection is on standby
Blinking blue:
 

Sending/receiving data through the 
Wi-Fi connection
1
2
3
4
Connect the smartphone/tablet to a network.
Enter “Image App” into the search box.
Select “Image App” 
 and install it.
SEE REVERSE SIDE
( 
The following is an example of when Android is being used.
Screens vary depending on your OS.)
Supported OS
 

For Android apps: Android 2.2 ~ Android 4.2
For iOS apps: iOS 4.3 ~ iOS 6.0 You can record/playback by 
us

ing the smartphone/tablet.
You can also save pictures 
in the camera on the 
smartphone/tablet. If you perform steps 
1 and 
2 while 
performing single image playback on 
the camera, you can easily transfer 
the image to the smartphone/tablet.
Launch “Image App” on 
the smartphone/tablet.
1This function can be used with the NFC compatible device with Android (OS version 2.3.3 or later). (excluding some models)
Connect by using the NFC function
Connecting manually
If the camera is not 
 

recognized even when 
touching the smartphone/
tablet, change positions 
and try again.
Do not touch this camera 
 

to the smar tphone/tablet 
strongly.
For information on the 
 

operation and settings 
of NFC-compatible 
smartphones/tablets, refer 
to the operating instructions 
of your device.
[ When connecting for the fi
 r st time]
When the connection screen is displayed, select [ Yes], and touch [ 
 

 ] on 
the smartphone/tablet again.
2
Touch the smartphone/tablet 
to [
] of the camera.
%.$54@72$@8JJ@(VJEF@FOHJOEE



%.$54@72$@8JJ@(VJEF@FOHJOEE


 






 
						

							
If the workgroup of the destination PC has been changed from 
 

the standard setting, you also need to change the setting of this 
unit in [PC Connection].
Select [Via Network].
Install “PHOTOfunSTUDIO” to the PC.For details on hardware requirements and installation, 
 

refer to 
“Owner’s Manual for advanced features” (PDF)
.
Create a folder that receives images with “PHOTOfunSTUDIO”. To create the folder automatically, select [Auto-create]. To 
 

specify a folder, create a new folder, or set a password to the 
folder, select [Create manually].
For details, refer to the operating instructions of 
 

“PHOTOfunSTUDIO” (PDF).
Select [Properties], then enable sharing of the folder. For details, refer to the operating instructions of your PC or Help 
 

on the operating system.
Select a folder you intend to use for receiving, then right-click.
Enable sharing of the folder.
For details, refer to the operating instructions of your PC or Help 
 

on the operating system.
Operation on the camera
Connecting via a wireless 
acc
ess pointYou can also connect your device 
 

to the camera directly without using 
a wireless access point.
Please refer to “Owner’s Manual 
for advanced features” (PDF) for 
details.
Operate the camera 
(according to the intended 
purpose).
Select the connection 
method.
Select the desired option.
Select [New 
Connection].
Turn on the 
Wi-Fi function.
5
4
3
2
1
You can display recorded pictures on 
a DLNA-compatible TV.
For details, refer to the operating 
 

instructions of your TV.
Every time you take a picture, the 
picture can be automatically sent to a 
smartphone/tablet or PC. Prepare folders for receiving images 
 

on the PC before sending a picture 
to the PC.
You can select and send recorded 
images to a smartphone/tablet or PC. Prepare folders for receiving images 
 

on the PC before sending a picture 
to the PC. Select the device you want to 
connect to.
When the connection is established, 
the screen is displayed.
Take or play back pictures on the 
camera.
Motion pictures cannot be displayed 
 

on the TV.Playback on TVSend Images While RecordingSend Images Stored in the 
Camera
Select [Playback on TV].
Select [WPS (Push-Button)].
Press and hold the 
wireless access point 
WPS button until it 
switches to WPS Mode.
Select [Send Images 
While Recording].
Select [Send Images 
Stored in the Camera].
Connecting the camera to a TV or PC etc. via a wireless access point
One of the connection methods is shown as an example. 
 

Please refer to “Owner’s Manual for advanced features” 
(PDF) for details.
Select [PC].
Select [PC].
Example:
Select the PC you want to connect 
to and the destination folder.
Take pictures on the camera.
The pictures are sent automatically 
after taking them.Folders sor ted by the sent date are created in the 
 

speci fi ed folder, and pictures are saved in those 
folders.
If the screen for a user account and password 
 

entry appears, enter the one you set on your PC.
Preparing folders for receiving imagesPrepare folders for receiving images on the PC before sending a 
picture to the PC.Create a PC user account [account name (up to 254 characters) 
 

and password (up to 32 characters)] consisting of alphanumeric 
characters. An attempt to create a receive folder may fail if the 
account includes non-alphanumeric characters. When using “PHOTOfunSTUDIO” When not using “PHOTOfunSTUDIO”
(For Windows)
Supported OS: Windows XP/ Windows Vista/ Windows 7/ Windows 8
Example: Windows 7
(For Mac)
Supported OS: OS X v10.4 to v10.8
Example: OS X v10.8
Select a folder you intend to use for receiving, then click on the 
items in the following order.
[File]  → [Get Info]
Example: Connecting to the TV
Example: Sending to the PC
Example: Sending to the PC
You can select the setting 
you used before from [History 
Connection].
Please refer to “Owner’s 
Manual for advanced 
features” (PDF) for details.
1
1
1 2
2
2
  Press camera [ON/OFF] 
button.

 Press [Wi-Fi].Make sure the Wi-Fi connection 
lamp 
 is lit blue.
Lit blue: 

The Wi-Fi connection is on standby
Blinking blue:
 

Sending/receiving data through the 
Wi-Fi connection
Select the PC you want to connect 
to and the destination folder.
Select [SINGLE] or [MULTI], and 
then select and send images.
Example: Connecting with [WPS 
 

(Push-Button)].
%.$54@72$@8JJ@(VJEF@FOHJOEE



%.$54@72$@8JJ@(VJEF@FOHJOEE