Panasonic Wifi Connection With Digital Camera Dmc Ts6 Quick Guide

							2
Connecting the camera to the smartphone/tablet (Remote Shooting)
1
Installing the smartphone/tablet app “Panasonic Image App”
Image App

Image AppImage App
You can connect Wi-Fi
 

® compatible devices to the camera wirelessly.
You can connect them directly or via a wireless access point.
 

When connecting the camera to a 
smartphone/tablet directly
Select “Google Play
TM Store”.
Select “App Store
SM”.
Android
TM
iOS When connecting the camera to a TV or 
PC, etc. via a wireless access point
To change the connection method, press [DISP.].
(Such as [ WPS Connection], [ Via Network], etc.)
Please refer to “Owner’s Manual for advanced features (Operating Instructions 
for advanced features)” (PDF) for details.
SSID refers to the name that is used to identify a network over  a wireless LAN 
 

connection. If the SSID matches for both devices, transmission is possible.WPS (Wi-Fi Protected Setup
 

TM) refers to a function that allows you to easily confi gure 
the settings related to the connection and security of wireless  LAN devices
.
An
 
 droid and Google Play are trademarks or registered trademarks o f Google Inc.
App Store is a service mark of Apple Inc.
 

The Wi-Fi Protected Setup™ Identifi er mark is a certifi cation m ark of Wi-Fi Alliance
 

®.
“Wi-Fi
 

®” is a registered trademark of Wi-Fi Alliance
®.
“Wi-Fi Protected Setup™”, “WPA™”, and “WPA2™” are trademarks of  Wi-Fi Alliance
 

®.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service  marks, or certifi cation marks of the Digital Living Network Alliance.
 

Connecting the came ra to a smartphone/tablet
Let’s connect to the Wi-Fi
SQC0178
Wi-Fi
® Connection Guide
The camera is not capable of connecting to a wireless network via public 
wireless LAN.
Digital Camera
Model No. 
DMC-FT6/DMC-TS6
Read the [Help] in the “Panasonic Image App” menu for further details on how to operate.
Operation on the smartphone/tablet Operation on the camera
1
4 3
67
2
5
Operation on the smartphone/tablet
Select [New Connection].
Select the same SSID as 
the one displayed on the 
screen in step 
3. Select [Remote Shooting].
Enter the password 
displayed on the screen 
in step 
3, and connect . 
The SSID and password 
are displayed.
Start “Image App” on 
your smartphone/tablet.When the connection is 
established, the recording 
screen is displayed.

  Press camera [ON/OFF] button.

 Press [Wi-Fi].
On the setting menu 
of your smartphone/
tablet, turn on the Wi-Fi 
function.
The service may not be able to be used properly depending on th e 
 

type of smartphone/tablet being used. For compatible devices, s ee 
the following support site.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)When downloading the app on a mobile network, high packet commu nication 
 

fees may be incurred depending on the details of your contract.
You can select the setting 
you used before from [History 
Connection].
Please refer to “Owner’s Manual 
for advanced features (Operating 
Instructions for advanced 
features)” (PDF) for details.
Make sure the Wi-Fi connection 
lamp 
 is lit blue.
Lit blue: 

The Wi-Fi connection is on standby
Blinking blue:
 

Sending/receiving data through the 
Wi-Fi connection
1
2
3
4
Connect the smartphone/tablet to a network.
Enter “Panasonic Image App” or “LUMIX” into the 
search box.
Select “Panasonic Image App” 
 and install it.
SEE REVERSE SIDE
( 
The following is an example of when Android is being used.
Screens vary depending on your OS.)
Supported OS
 

For Android apps: Android 2.3.3 or higher
For iOS apps: iOS 6.0 or higher
(Please note that the iPhone 3GS is not supported.) You can record/playback by 
us

ing the smartphone/tablet.
You can also save pictures 
in the camera on the 
smartphone/tablet. If you perform steps 
1 and 
2 while 
performing single image playback on 
the camera, you can easily transfer 
the image to the smartphone/tablet.
Launch “Image App” on 
the smartphone/tablet.
1This function can be used with the NFC compatible device with A
ndroid (OS version 2.3.3 or later). (excluding some models)
Connect by using the NFC function
Connecting manually
If the camera is not 
 

recognized even when 
touching the smar tphone/
tablet, change positions 
and try again.
Do not touch this camera 
 

to the smar tphone/tablet 
strongly.
For information on the 
 

operation and settings 
of NFC-compatible 
smartphones/tablets, refer 
to the operating instructions 
of your device.
[ When connecting for the fi rst time]
W hen the connection confi rmation screen is displayed, select [ Yes], and 
 

touch [
] on the smar tphone/tablet again.
2
Touch the smartphone/tablet 
to the camera while [
]
is displayed on the connection 
screen of “Image App”.
%.$54@42$@8JJ@(VJEF@FOHJOEE



%.$54@42$@8JJ@(VJEF@FOHJOEE


 






 
						

							
If the workgroup of the destination PC has been changed from 
 

the standard setting, you also need to change the setting of th is 
unit in [PC Connection].
Select [Via Network].
Install “PHOTOfunSTUDIO” to the PC. For details on hardware requirements and installation, refer to  
 

“Owner’s Manual for advanced features (Operating Instructions 
for advanced features)” (PDF).
Create a folder that receives images with “PHOTOfunSTUDIO”. To create the folder automatically, select [Auto-create]. To 
 

specify a folder, create a new folder, or set a password to the  
folder, select [Create manually].
For details, refer to the operating instructions of 
 

“PHOTOfunSTUDIO” (PDF).
Select [Properties], then enable sharing of the folder. For details, refer to the operating instructions of your PC or  Help 
 

on the operating system.
Select a folder you intend to use for receiving, then right-cli
ck.
Enable sharing of the folder. For details, refer to the operating instructions of your PC or  Help 
 

on the operating system.
Operation on the camera
Connecting via a wireless 
acc
ess pointYou can also connect your device 
 

to the camera directly without using 
a wireless access point.
Please refer to “Owner’s Manual 
for advanced features (Operating 
Instructions for advanced features)” 
(PDF) for details.
Operate the camera 
(according to the intended 
purpose).
Select the connection 
method.
Select the desired option.
Select [New 
Connection].
Turn on the 
Wi-Fi function.
5
4
3
2
1
You can display recorded pictures on 
a DLNA-compatible TV.
For details, refer to the operating 
 

instructions of your TV.
Every time you take a picture, the 
picture can be automatically sent to a 
smartphone/tablet or PC. Prepare folders for receiving images 
 

on the PC before sending a picture 
to the PC.
You can select and send recorded 
images to a smartphone/tablet or PC. Prepare folders for receiving images 
 

on the PC before sending a picture 
to the PC. Select the device you want to 
connect to.
When the connection is established, 
the screen is displayed.
Take or play back pictures on the 
camera.
Motion pictures cannot be displayed 
 

on the TV.Playback on TVSend Images While RecordingSend Images Stored in the 
Camera
Select [Playback on TV].
Select [WPS (Push-Button)].
Press and hold the 
wireless access point 
WPS button until it 
switches to WPS Mode.
Select [Send Images 
While Recording].
Select [Send Images 
Stored in the Camera].
Connecting the camera to a TV or P
C etc. via a wireless access point
One of the connection methods is shown as an example. 
 

Please refer to “Owner’s Manual for advanced features 
(Operating Instructions for advanced features)” (PDF) for 
details.
Select [PC].
Select [PC].
Example:
Select the PC you want to connect 
to and the destination folder.
Take pictures on the camera.
The pictures are sent automatically 
after taking them.Folders sor ted by the sent date are created in the 
 

specifi ed folder, and pictures are saved in those 
folders.
If the screen for a user account and password 
 

entry appears, enter the one you set on your PC.
Preparing folders for receiving imagesPrepare folders for receiving images on the PC before sending a 
picture to the PC.Create a PC user account [account name (up to 254 characters) 
 

and password (up to 32 characters)] consisting of alphanumeric 
characters. An attempt to create a receive folder may fail if t he 
account includes non-alphanumeric characters. When using “PHOTOfunSTUDIO” When not using “PHOTOfunSTUDIO”
(For Windows)Supported OS: Windows Vista
®/Windows
® 7/ Windows
® 8/ Windows
® 8.1
Example: Windows 7
(For Mac)
Supported OS: OS X v10.5 to v10.10
Example: OS X v10.8
Select a folder you intend to use for receiving, then click on  the 
items in the following order.
[File] → [Get Info]
Example: Connecting to the TV
Example: Sending to the PC
Example: Sending to the PC
You can select the setting 
you used before from [History 
Connection].
Please refer to “Owner’s 
Manual for advanced features 
(Operating Instructions for 
advanced features)” (PDF) for 
details.
1
1
1 2
2
2
   Press camera [ON/OFF] 
button.

 Press [Wi-Fi].Make sure the Wi-Fi connection 
lamp 
 is lit blue.
Lit blue: 

The Wi-Fi connection is on standby
Blinking blue:
 

Sending/receiving data through the 
Wi-Fi connection
Select the PC you want to connect 
to and the destination folder.
Select [SINGLE] or [MULTI], and 
then select and send images.
Example: Connecting with [WPS 
 

(Push-Button)].
When the PC you want to connect 
 

to is not displayed, select [Manual 
Input], and enter the computer name 
of the PC (NetBIOS name for Apple 
Mac computers).
When the PC you want to connect 
 

to is not displayed, select [Manual 
Input], and enter the computer name 
of the PC (NetBIOS name for Apple 
Mac computers).
%.$54@42$@8JJ@(VJEF@FOHJOEE



%.$54@42$@8JJ@(VJEF@FOHJOEE