Panasonic Wireless Communication System Wx Cc2010 Operating Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Digital Technology
WX-CC2010TRANSCEIVER
MONITOR
POWER
VEHICLE
PRESENT
AB
WX-CT2020
Model No.WX-CC2010 Series
Wireless Communication System
Center Module
Operating Instructions
ENGLISH
FRANÇAIS 

2
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications....

3
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or...

4
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS  ...................................................................................................... 3
PREFACE..................................................................................................................................................... 5
PRECAUTIONS............................................................................................................................................ 6
PANASONIC WX-CC2010 SERIES SYSTEM PARTS AND...

5
Panasonic WX-CC2010 Center Module is designed for
Panasonic Wireless Communication System, which is used
with drive-through menu boards, etc. The system operates
on UHF frequencies, and offers multi-channel flexibility
making use of the PLL (Phase Locked Loop) technology.
FEATURES
•A remote speaker can be added to the system.
•The WX-CT2020 Order Taker Unit and WX-CH2050A
All-in-One Headset are designed to facilitate the bat-
tery installation. 
PREFACE
New Functions of the WX-CC2010
(New Technological...

6
This center module is a sensitive device and should be
regarded as such. If handled carelessly, the hazard of elec-
tric shock may exist.
In order to utilize the instrument to its fullest potential,
please consider the following precautions.
1. Handle the equipment with care. This equipment con-
tains sensitive components that can be damaged by
improper handling or storage.
2. Refer any servicing to qualified service personnel. Do
not attempt to disassemble the center module, order
taker unit or other...

7
PANASONIC WX-CC2010 SERIES SYSTEM PARTS AND ACCESSORIES
■All-in-One Headset
WX-CH2050A■Order Taker Unit
WX-CT2020
■Order Taker Unit Case
WX-CT2022
■Speaker Microphone
WX-C550
■Battery Charger
For WX-CH2050A: 2050CH
For WX-CT2020: 2020CH
■Vehicle Detector 917-1
(Locally Procured)
■Rechargeable Battery
For WX-CH2050A: 2050BAT or 2051BAT
For WX-CT2020: 2020BAT
■Speaker/Loop Cable Kit
WX-C688
AB
WX-CT2020
WX-CC2010TRANSCEIVER
MONITOR
POWER
VEHICLE
PRESENT
C
o
n
d
itio
n
in
gConditionC
h
arg
in
gReady...

8
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■WX-CC2010 Center Module
W
X-CC2010TRANSCEIVER
MONITORULTRAPEX  II
POWER
VEHICLE
PRESENT
DNR
A
B
POWER
VEHICLE
PRESENT
oy!0!1!2!3!4!5 u
i
OFF
OFF
OFF
OFF
LINE
OFFON
ON
ON
ON
G/MIC
ON
REMOTE
AUX IN SEL
TALK MONITOR
AUX INTALKPAGEBEEP
A
OFF
USA
OFF
OFF
OFF
OFF
OFFB
ON
CND
ON
ON
ON
ON
ONCHANNELCONTINUESUSA/CANADAT/B
LEVEL
DNR
EFFECT
TBC1TBC2DNR1DNR2DNR3
VEHICLE DETECTOR
CH SELECT
NORMAL
OFFOVERRIDE ON
1
2
3
4
5 6 7 8
POWER
ON
OFF
CAUTION
USE WITH...

9
Notes:
•The following switches and terminals should be used
by qualified service personnel or system installers
only.
•To change the setting of the following switches, turn
off the power of the center module, then turn it back
on.
qAuxiliary Input On/Off Switch (REMOTE AUX IN,
ON/OFF)
Set this switch to ON to output the audio (that has
been input from the AUX INPUT terminals) to the
remote speakers.
Talk On/Off Switch (REMOTE TALK, ON/OFF)
To monitor the communication between the store per-
sonnel and...

10
uPower Indicator (POWER) (Green)
This indicates that the power of center module is on.
iVehicle Detector Indicator (VEHICLE PRESENT)
(Amber)
This indicates that a vehicle has been detected. 
oMenuboard Speaker Volume Control
(MENU SP, 0 to 10)
This control sets the output level of Menuboard
Speaker to the optimum level for speaking to the cus-
tomer.
Notes:
•Adjust this control after you set the VEHICLE
DETECTOR switch to OVERRIDE ON and the vehi-
cle detector indicator lights up. Otherwise, you...