Panasonic Wj Nd300p Addendum Manual

							Addendum for the WJ-ND300 series
Read this notice with the operating instructions.
Operating the Unit for the First Time
Important:
When connecting an optional extension unit (the WJ-HDE300 series), turn on the power of the extension unit before turning
on the power of this unit.
[1] Turn on the POWER switch.
The OPERATE indicator will light and the system check (checking the system and hard disk) will start.
The WJ-ND300 indication will be displayed on the LCD at startup, and the Initializing indication will be displayed while start-
up. Then, the System Checking indication will be displayed while checking the system. When the system check is completed,
the time and date display (standby display) will be displayed on the LCD.
[2] Display HDD DISK MENU.
After the browser starts, enter the IP address set to this unit in the address box, and press the enter key. Then the HDD DISK
MENU will be displayed. Perform the settings with this menu this menu according to your needs. Refer to the Setup
Instructions (PDF) for descriptions of how to operate the HDD DISK MENU.
Uninstalling the Viewer Software
[For Windows XP]
1. Open Add or Remove Programs in Control Panel.
2. Select WJ-ND300 Viewer (the program to be deleted) from presently installed programs and click the [Change/ Remove]
button.
The uninstall program will be launched and the wizard will be displayed.
3. Uninstall the program by following instructions on the monitor.
[For Windows 2000]
1. Open Add/Remove Programs  in Control Panel.
2. Select WJ-ND300 Viewer (the program to be deleted) from presently installed programs and click the [Change/Remove]
button.
The uninstall program will be launched and the wizard will be displayed.
3. Uninstall the program by following instructions on the monitor.
About the Error Log
The following are the descriptions about the contents of the error log.
W-ERR u-d Failed to write/read data on the
HDD.
The HDD may be malfunction-
ing.Press the ALARM RESET button to cancel the
error status. If this error occurs frequently, con-
tact the dealer to replace the HDD. (*1)
R-ERR u-d
HDu-d 1DOWN HDD-10 ERR
RAID5 1DOWNA HDD of RAID is failed. Contact the dealer.
After recovering/replacing the faulty disk, the
error status will be canceled.
HDu 2DOWN
Please Setup on DISK
CONFIG MENU Disk array is changed. Display the DISK CONFIG MENU and config-
ure the HDD settings.  Error Log Indication on the LCD Description Solution 
						

							NM0905-0       3TU001467AAA
Parameter
uDescription
Unit/unit numberDetail
1-4: Extension unit, 9: RAID of this unit, 0: SINGLE of this unit
f FAN number 1-4: FAN number (FAN1-FAN4)
d Disk number 1-4: Disk number (HDD1-HDD4), 5: Others (Unknown HDD)
n Network port number 1: Camera port, 2: Client PC port, 3: Maintenance port
cc
vvv Camera number
Volume number01-32: Camera number
NML: Normal recording area, EVT: Event recording area, 
CPY: Copy area
SMART u-d HDD-1-u-d ERR
HDD WARNING The HDD may be malfunction-
ing and may work 
incorrectly. Contact the dealer to replace the HDD. (*1)
H.METER u-d HDD-2-u-d ERR HDD HOUR METER The set time for the hour meter
has passed.
It may be reaching the end of
the HDD’s lifetime. Press the ALARM RESET button to cancel the
error status. If this error occurs frequently, con-
tact the dealer to replace the HDD. (*1)
V-ERROR vvv
REMOVE u-d
EVT-**% or
EVT-FULL
CPY-**% or
CPY-FULL
CAM cc ERR
LINK_ERRp HDD-3-u-d ERR
HDD REMOVED
HDD-5ERR
EVENT-HDD FULL
HDD-6ERR 
COPY-HDD FULL
NET-3-0ERR
CAMERA cc ERROR
NET-1-n ERR
NW LINK ERROR Data on each recording area is
lost by the REMOVE error,
etc.
An error has occurred on the
HDD and the HDD has been
unmounted from the system
automatically.
The HDD is almost full or com-
pletely full.
Communication with the net-
work camera is unstable, or no
network camera is connected.
Network between this unit and
the network camera is discon-
nected. Contact the dealer.
After replacing the faulty disk, the error status
will be canceled. (*1)
Contact the dealer.
After replacing the faulty disk, the error status
will be canceled. (*1)
Initialize or replace the HDD. (*1)
Press the ALARM RESET button to cancel the
error status. Check the communication status
between this unit and the network camera.
Check the network connection.
Error Log Indication on the LCD Description Solution
*1: The HDD should be replaced by the qualified service personnel or system \
installers. Contact the dealer to replace the
HDD.
Contact the dealer when an unlisted error occurred.