Home > Philips > Monitor > Philips 190c8f User Manual

Philips 190c8f User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Philips 190c8f User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    Installing Your LCD Monitor 
    l     For best performance, ensure that your display settings are set at 1280x\
    1024, 60Hz.
    Note: You can check the current display settings by pressing the OK button \
    once. The current display mode is shown in OSD main controls called 
    RESOLUTION.
     
    RETURN TO TOP OF THE PAGE 
     
             
    file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/install\
    .htm (3 of 3)2008-3-31 12:40:41 
    						
    							
    Connecting to Your PC
       
            
     
     
     
     
    • Front View Product 
    Description
     • Accessory Pack
     • Connecting to Your PC
     • Getting Started 
     • Optimizing Performance
     • The base 
      
       
       
       
       
       
    Connecting to Your PC
    Accessory Pack
    Unpack all the parts. 
     
    Power cord 
     
    VGA cable 
     
    EDFU pack
    RETURN TO TOP OF THE PAGE 
    file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/connect\
    .htm (1 of 3)2008-3-31 12:40:55 
    						
    							
    Connecting to Your PC
     
    Connecting to Your PC1) Connect the power cord to the back of the monitor firmly. (Philips has\
     pre-connected 
    VGA cable for the first installation.
     
        
     
       
    file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/connect\
    .htm (2 of 3)2008-3-31 12:40:55 
    						
    							
    Connecting to Your PC
    2) Connect to PC  (a)
    Turn off your computer and unplug its power cable.
      (b)
    Connect the monitor signal cable to the video connector on the back of y\
    our 
    computer.
      (c)
    Plug the power cord of your computer and your monitor into a nearby outl\
    et.
      (d)
    Turn on your computer and monitor. If the monitor displays an image, 
    installation is complete.
     
    RETURN TO TOP OF THE PAGE 
            
    file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/connect\
    .htm (3 of 3)2008-3-31 12:40:55 
    						
    							
    The Base
       
            
     
       
     
    • Front View Product 
    Description
     • Accessory Pack
     • Connecting to your PC
     • Getting Started 
     • Optimizing Performance
     • Unfold the Base
     • Fold the Base
      
     
       
     
       
     
       
     
       
     
       
     
    The Base
    Unfold and Fold the Base
    Unfold the Base1) Put monitor face down on the safe surface.
    2) Pull up the base.
          
     
    file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/base.ht\
    m (1 of 3)2008-3-31 12:40:55 
    						
    							
    The Base
     
    Fold the Base 1) Push down the head of monitor.
      
    file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/base.ht\
    m (2 of 3)2008-3-31 12:40:55 
    						
    							
    The Base
     
    RETURN TO TOP OF THE PAGE
            
    file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/base.ht\
    m (3 of 3)2008-3-31 12:40:55 
    						
    							
    Getting Started
       
            
     
     
    Your LCD Monitor :
     
    • Front View Product 
    Description
     • Setting Up and Connecting 
    Your Monitor
     • Getting Started 
     • Optimizing Performance
      
     
       
       
       
       
       
       
     
    Getting Started 
    Getting Started 
    Use the information file ( .inf) for Windows® 95/98/2000/Me/XP/Vist\
    a or later
     
    The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play\
     requirements for 
    Windows® 95/98/2000/Me/XP/Vista. This information file ( .inf) shou\
    ld be installed in order that 
    your Philips monitor can be enabled from the Monitor dialog box in Win\
    dows® 95/98/2000/Me/
    XP/Vista and the Plug & Play application can be activated. The installat\
    ion procedure based on 
    Windows® 95 OEM Release 2 , 98 , 2000 , Me, XP and Vista is specifie\
    d as follows.
    For Windows® 95 
    1.  Start Windows® 95 
    2.  Click on the Start button, point to Settings, and then click on Con\
    trol Panel. 
    3.  Double click on the Display Icon. 
    4.  Select the Settings tab then click on Advanced.... 
    5.  Select the Monitor button, point to Change... then click on Have Di\
    sk.... 
    6.  Click on the Browse... button, select the appropriate drive F: ( CD-R\
    OM Drive) then click 
    on the OK button. 
    7.  Click on the OK button then select your monitor model and click on OK\
    . 
    8.  Click on the Close button. 
    For Windows® 98 
    1.  Start Windows® 98 
    2.  Click on the Start button, point to Settings, and then click on Con\
    trol Panel. 
    3.  Double click on the Display Icon. 
    4.  Select the Settings tab then click on Advanced.... 
    5.  Select the Monitor button, point to Change... then click on Next 
    6.  Select Display a list of all the drivers in a specific location, so you\
     can choose the driver 
    you want. then click on Next and then click on Have Disk.... 
    7.  Click on the Browse... button, select the appropriate drive F: ( CD-R\
    OM Drive) then click 
    on the OK button. 
    8.  Click on the OK button then select your monitor model and click on the\
     Next button. 
    9.  Click on the Finish button then the Close button. 
    For Windows® 2000 
    1.  Start Windows® 2000 
    file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/gt_star\
    t.htm (1 of 3)2008-3-31 12:40:56 
    						
    							
    Getting Started
     
    2.  Click on the Start button, point to Settings, and then click on Con\
    trol Panel. 
    3.  Double click on the Display Icon. 
    4.  Select the Settings tab then click on Advanced.... 
    5.  Select Monitor  
    - If the Properties button is inactive, it means your monitor is prope\
    rly configured. Please 
    stop installation.  
    - If the Properties button is active. Click on Properties button. Pl\
    ease follow the steps 
    given below. 
    6.  Click on Driver and then click on Update Driver... then click on the\
     Next button. 
    7.  Select Display a list of the known drivers for this device so that I ca\
    n choose a specific 
    driver, then click on Next and then click on Have disk.... 
    8.  Click on the Browse... button then select the appropriate drive F: ( \
    CD-ROM Drive). 
    9.  Click on the Open button, then click on the OK button. 
    10.  Select your monitor model and click on the Next button. 
    11.  Click on the Finish button then the Close button.  
    If you can see the Digital Signature Not Found window, click on the Y\
    es button. 
    For Windows® Me 
    1.  Start Windows® Me 
    2.  Click on the Start button, point to Settings, and then click on Con\
    trol Panel. 
    3.  Double click on the Display Icon. 
    4.  Select the Settings tab then click on Advanced.... 
    5.  Select the Monitor button, then click on Change... button. 
    6.  Select Specify the location of the driver(Advanced) and click on the\
     Next button. 
    7.  Select Display a list of all the drivers in a specific location, so you\
     can choose the driver 
    you want, then click on Next and then click on Have Disk.... 
    8.  Click on the Browse... button, select the appropriate drive F: ( CD-R\
    OM Drive) then click 
    on the OK button. 
    9.  Click on the OK button, select your monitor model and click on the Ne\
    xt button. 
    10.  Click on Finish button then the Close button. 
    For Windows® XP
    1.  Start Windows® XP
    2.  Click on the Start button and then click on Control Panel.
    3.  Select and click on the category Printers and Other Hardware
    4.  Click on the Display Item.
    5.  Select the Settings tab then click on the Advanced button.
    6.  Select Monitor tab 
    - If the Properties button is inactive, it means your monitor is prope\
    rly configured. Please 
    stop installation. 
    - If the Properties button is active, click on Properties button. 
    Please follow the steps below.
    7.  Click on the Driver tab and then click on Update Driver... button.
    8.  Select the Install from a list or specific location [advanced] radio b\
    utton and then click on 
    the Next button.
    9.  Select the Dont Search. I will choose the driver to install radio but\
    ton. Then click on the 
    Next button.
        
     
       
    file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/gt_star\
    t.htm (2 of 3)2008-3-31 12:40:56 
    						
    							
    Getting Started
    10.  Click on the Have disk... button, then click on the Browse... button\
     and then select the 
    appropriate drive F: (CD-ROM Drive).
    11.  Click on the Open button, then click the OK button.
    12.  Select your monitor model and click on the Next button. 
    - If you can see the has not passed Windows® Logo testing to verify \
    its compatibility with 
    Windows® XP message, please click on the Continue Anyway button. 
    13.  Click on the Finish button then the Close button.
    14.  Click on the OK button and then the OK button again to close the Dis\
    play_Properties 
    dialog box.
    For Windows® Vista
    1.  Start Windows® Vista 
    2.  Click the Start button; select and click on Control Panel. 
    3.  Select and click on Hardware and Sound 
    4.  Choose Device Manager and Click on Update device drivers. 
    5.  Select Monitor and then right click on Generic PnP Monitor. 
    6.  Click on Update Driver Software. 
    7.  Select Browse my computer for driver software. 
    8.  Click the Browsebutton and choose the drive in which youve placed the\
     disk. Example:
    (CD-ROM Drive:\\Lcd\PC\drivers\). 
    9.  Click the Next button. 
    10.  Wait few minutes for installing the driver, and then click Close butto\
    n.
    If your Windows® 95/98/2000/Me/XP/Vista version is different or you n\
    eed more detailed 
    installation information, please refer to your Windows® 95/98/2000/Me\
    /XP/Vista users manual. RETURN TO TOP OF THE PAGE
            
    file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/gt_star\
    t.htm (3 of 3)2008-3-31 12:40:56 
    						
    All Philips manuals Comments (0)

    Related Manuals for Philips 190c8f User Manual